This document specifies terms and definitions relating to dredgers, with the aim of giving clear enough definitions for every term for them to be understood by all specialists. This document is applicable only to equipment which is used for the construction and maintenance of navigable waterways and the extraction of soil. The terms specified in this document are intended to be used in documentation of all kinds. Certain standardized terms are also given with their abridged version; these can be...view more

    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day

This document specifies noise limits, noise measurement methods and hearing protection for marine cranes, including electro-hydraulic cylinder luffing cranes, electro-hydraulic wire rope luffing cranes and electric wire rope luffing cranes. This document is applicable to the noise assessment of marine cranes and for the protection of their operators.

    • sale 15% off
    • Standard
      6 pages
      English language

This document specifies the general technical manufacturing requirements for marine cranes of metal construction. This document is applicable to the following types of marine cranes: — deck cranes mounted on ships for handling cargo or containers in harbour conditions; — floating cranes or grab cranes mounted on barges or pontoons for operating in harbour conditions; — engine room cranes and provision cranes, etc. mounted on ships (including floating docks) for handling equipment and stores in h...view more

    • sale 15% off
    • Standard
      9 pages
      English language

This document specifies the operation and maintenance requirements of marine cranes, including electro-hydraulic cylinder luffing cranes, electro-hydraulic wire rope luffing cranes and electric wire rope luffing cranes. This document is applicable to the following types of marine cranes operating in harbour or sheltered water conditions: — deck cranes mounted on ships for handling equipment, cargo or containers in harbour or sheltered water conditions; — floating cranes mounted on barges or pont...view more

    • sale 15% off
    • Standard
      6 pages
      English language

This document provides a single classification for all types of dredgers designed for loosening, raising,
transporting and disposing of dredged material.

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

ISO 19355:2016 specifies the structural requirements for marine cranes of metal construction. ISO 19355:2016 is applicable to the following types of marine cranes: - deck cranes mounted on ships for handling cargo or containers in harbour or sheltered water conditions; - floating cranes or grab cranes mounted on ships, barges or pontoons for operating in harbour conditions; - engine room cranes and provision cranes, etc. mounted on ships (including floating docks) for handling equipment and stor...view more

    • sale 15% off
    • Standard
      9 pages
      English language
    • sale 15% off
    • Standard
      9 pages
      English language

ISO 19357:2016 specifies the requirements for design, construction, safety, performance, acceptance test and operation of marine cranes for low temperature operation. ISO 19357:2016 is applicable to marine cranes of the following types, which are exposed to and operated in low temperatures: - deck cranes mounted on ships for handling cargo or containers in harbour or sheltered water conditions; - floating cranes or grab cranes mounted on barges or pontoons for operating in harbour conditions or ...view more

    • sale 15% off
    • Standard
      10 pages
      English language

Rigging used for marine cranes is mainly wire rope rigging. ISO 19360:2016 specifies the technical requirements of the selection and application of running rigging and standing rigging used for wire rope rigging of marine cranes. ISO 19360:2016 specifies the minimum requirements of the allowable strength and performance level for wire ropes of marine cranes according to the design, application and maintenance requirements of cranes. ISO 19360:2016 specifies the implementation criteria of install...view more

    • sale 15% off
    • Standard
      11 pages
      English language

ISO 19354:2016 specifies the general requirements for marine cranes of metal construction. It is applicable to the following types of marine cranes: - deck cranes mounted on ships for handling cargo or containers in harbour or sheltered water conditions; - floating cranes or grab cranes mounted on barges or pontoons for operating in harbour conditions; - engine room cranes and provision cranes, etc. mounted on ships (including floating docks) for handling equipment and stores in harbour conditio...view more

    • sale 15% off
    • Standard
      13 pages
      English language

ISO 3078:2016 specifies the general requirements of cargo winches on cargo derricks, particularly electric drive or hydraulic drive.

    • sale 15% off
    • Standard
      8 pages
      English language

ISO 19356:2016 describes the required tests and the testing procedures for marine cranes of metal construction. ISO 19356:2016 is applicable to the following types of marine cranes: - deck cranes mounted on ships for handling cargo or containers in harbour or sheltered water conditions; - floating cranes or grab cranes mounted on barges or pontoons for operating in harbour conditions; - engine room cranes, provision cranes, etc. mounted on ships (including floating docks) for handling equipment ...view more

    • sale 15% off
    • Standard
      6 pages
      English language
    • sale 15% off
    • Standard
      6 pages
      English language

ISO 16857:2013 specifies the types and basic parameters, technical requirements, marking, storage, and transportation, use and maintenance of shackles, loose gear of lifting appliances on ships. ISO 16857:2013 is applicable to lifting appliances on ships.

    • sale 15% off
    • Standard
      9 pages
      English language

ISO 16856:2013 specifies the types and basic parameters, technical requirements, marking, storage, and transportation, use and maintenance of hooks as loose gear of lifting appliances on ships. ISO 16856:2013 is applicable to lifting appliances on ships.

    • sale 15% off
    • Standard
      11 pages
      English language

ISO 16855:2013 specifies the general requirements for loose gear of lifting appliances on ships. ISO 16855:2013 is applicable to lifting appliances on ships.

    • sale 15% off
    • Standard
      7 pages
      English language

ISO 16858:2013 specifies the structural types, basic parameters, technical requirements, test methods, inspection rules, marking, storage, and transportation of sheaves, loose gear of lifting appliances on ships. ISO 16858:2013 is applicable to hot-rolled sheaves of lifting appliances on ships.

    • sale 15% off
    • Standard
      14 pages
      English language

This European Standard specifies the requirements for general-purpose offshore cranes including their supporting pedestals or structures. The standard is applicable to general-purpose offshore cranes covered by the scope of this European Standard which are manufactured after the date of its publication as EN. This European Standard is not applicable to general-purpose offshore cranes which are manufactured before the date of its publication as an EN. This European Standard does not cover use of ...view more

    • sale 10% off
    • Standard
      96 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the requirements for general-purpose offshore cranes including their supporting pedestals or structures.
The standard is applicable to general-purpose offshore cranes covered by the scope of this European Standard which are manufactured after the date of its publication as EN.
This European Standard is not applicable to general-purpose offshore cranes which are manufactured before the date of its publication as an EN.
This European Standard does not cover use ...
view more

    • sale 10% off
    • Standard
      96 pages
      English language
    • e-Library read for
      1 day

This document specifies the safety requirements for floating cranes including their supporting pedestals or structures.
This document applies to cranes manufactured after the date of issue of this document.
This document does not cover:
a)   fabrication, assembly, dismantling or changing the configuration of the crane;
b)   lifting accessories, i.e. any item between the hook and the load;
c)   design temperature below -20 °C;
d)   operations at an ambient temperature above 50 °C;
e)   cranes covere...
view more

    • sale 10% off
    • Standard
      63 pages
      English language
    • e-Library read for
      1 day

Migrated from Progress Sheet (TC Comment) (2000-07-10): Decision to proceed with the FV taken during the 6th meeting (RES. 51/1996)

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

Lays down requirements for design, installation and inspection. It is necessary to ensure compliance with such statutory requirements, rules and regulations as may be applicable to any individual ship as well as with lift safety codes.

    • sale 15% off
    • Standard
      4 pages
      English language
    • sale 10% off
    • Standard
      4 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      4 pages
      French language
    • sale 15% off
    • Standard
      4 pages
      French language

Specifies requirements and characteristics of single-drum and double-drum trawl winches with electric, electro-hydraulic, hydraulic diesel or externally powered drive.

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

Specifies requirements for cranes powered by electric or hydraulic systems or reciprocating international combustion engines. Cranes are capable of hoisting, lowering, level luffing or slewing cargo. All functions may be performed seperatly or simultaneously, as agreed between the manufacturer and parchaiser. Magnet and grabbing types, details for the type of mounting, twin jib crane, lelescopic jip crane, offshore operating crane are not included.

    • sale 15% off
    • Standard
      6 pages
      English language
    • sale 15% off
    • Standard
      6 pages
      French language
    • sale 15% off
    • Standard
      6 pages
      French language

Defines types of assemblies and specifies dimensions and materials of components for derrick boom gooseneck bearings of conventional derrick design to be fitted on-board ships for cargo handling purposes. Does not apply to special types of derricks.

    • sale 15% off
    • Standard
      16 pages
      English language
    • sale 15% off
    • Standard
      16 pages
      French language
    • sale 15% off
    • Standard
      16 pages
      French language

Specifies dimensions and materials. Trunnion pieces are divided into three types: type A with a single lower eye, type B with a centrally-located eye and type C with two eyes, one upper and one lower.

    • sale 15% off
    • Standard
      4 pages
      English language
    • sale 15% off
    • Standard
      4 pages
      French language
    • sale 15% off
    • Standard
      4 pages
      French language

Lays down the main dimensions for interchangeability and the materials for eyes, forks and associated bolts or pins for components subject to tension load. Is not applicable to components subject to compressive thrust or torsional loads.

    • sale 15% off
    • Standard
      3 pages
      English language
    • sale 15% off
    • Standard
      3 pages
      French language
    • sale 15% off
    • Standard
      3 pages
      French language

Lays down the main dimensions for interchangeability and the materials for forks and associated bolts or pins for derrick boom heel fittings.

    • sale 15% off
    • Standard
      2 pages
      English language
    • sale 15% off
    • Standard
      2 pages
      French language
    • sale 15% off
    • Standard
      2 pages
      French language

Lays down requirements for design, installation and inspection. It is necessary to ensure compliance with such statutory requirements, rules and regulations as may be applicable to any individual ship as well as with lift safety codes.

    • sale 15% off
    • Standard
      4 pages
      English language
    • sale 10% off
    • Standard
      4 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      4 pages
      French language
    • sale 15% off
    • Standard
      4 pages
      French language

Specifies dimensions and materials. Guidance information on the positioning of the guy eyeplate (eyeplate according to ISO 8146) on the derrick boom is given in the annex.

    • sale 15% off
    • Standard
      5 pages
      English language
    • sale 15% off
    • Standard
      5 pages
      French language
    • sale 15% off
    • Standard
      5 pages
      French language

Lays down the dimensions and materials of oval eyeplates primarily intended for mounting on ships' decks and as guy eyeplates on ships' derrick booms for cargo handling purposes.

    • sale 15% off
    • Standard
      3 pages
      English language
    • sale 15% off
    • Standard
      3 pages
      French language
    • sale 15% off
    • Standard
      3 pages
      French language