iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 5247-1:2004

(Main)

Textile machinery and accessories — Weaving machines — Part 1: Vocabulary and classification

Textile machinery and accessories — Weaving machines — Part 1: Vocabulary and classification

ISO 5247-1:2004 establishes a vocabulary of terms and a system of classification for weaving machines used in the textile industry for the production of woven fabrics by the weaving technique, i.e. by interlacing of two (or more) systems of parallel threads, and by machines using hybrid forming methods.

Matériel pour l'industrie textile — Métiers et machines à tisser — Partie 1: Vocabulaire et classification

L'ISO 5247-1:2004 établit un vocabulaire et un système de classification pour les machines à tisser utilisées dans l'industrie textile à la fabrication des tissus par la technique de tissage, c'est-à-dire par l'entrecroisement de deux (ou plusieurs) systèmes de fils parallèles, et pour les machines utilisant des méthodes hybrides de formation de l'étoffe.

General Information

Status
Published
Publication Date
22-Nov-2004
ICS
01.040.59 - Textile and leather technology (Vocabularies)
59.120.30 - Looms. Weaving machines
Technical Committee
ISO/TC 72/SC 3 - Machinery for fabric manufacturing including preparatory machinery and accessories
Drafting Committee
ISO/TC 72/SC 3 - Machinery for fabric manufacturing including preparatory machinery and accessories
Current Stage
9060 - Close of review
Start Date
04-Jun-2029
Ref Project

Relations

Revises
ISO 5247:1983 - Textile machinery and accessories — Weaving machines — Classification and vocabulary
Effective Date
15-Apr-2008

Buy Standard

ISO 5247-1:2004ISO 5247-1:2004
PreviousNext
Standard
ISO 5247-1:2004
English language
12 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO

STANDARD 5247-1
NORME
First edition
Première édition
INTERNATIONALE
2004-11-15

Textile machinery and accessories —
Weaving machines —
Part 1:
Vocabulary and classification
Matériel pour l'industrie textile — Métiers
et machines à tisser —
Partie 1:
Vocabulaire et classification





Reference number
Numéro de référence
ISO 5247-1:2004(E/F)
©
ISO 2004

---------------------- Page: 1 ----------------------
ISO 5247-1:2004(E/F)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.

©  ISO 2004
The reproduction of the terms and definitions contained in this International Standard is permitted in teaching manuals, instruction
booklets, technical publications and journals for strictly educational or implementation purposes. The conditions for such reproduction are:
that no modifications are made to the terms and definitions; that such reproduction is not permitted for dictionaries or similar publications
offered for sale; and that this International Standard is referenced as the source document.
With the sole exceptions noted above, no other part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
La reproduction des termes et des définitions contenus dans la présente Norme internationale est autorisée dans les manuels
d'enseignement, les modes d'emploi, les publications et revues techniques destinés exclusivement à l'enseignement ou à la mise en
application. Les conditions d'une telle reproduction sont les suivantes: aucune modification n'est apportée aux termes et définitions; la
reproduction n'est pas autorisée dans des dictionnaires ou publications similaires destinés à la vente; la présente Norme internationale
est citée comme document source.
À la seule exception mentionnée ci-dessus, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que
ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'ISO à
l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland/Publié en Suisse

ii © ISO 2004 – All rights reserved/Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 5247-1:2004(E/F)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be repres
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 14500:2003(Main)
Textile machinery and accessories — Harnesses for Jacquard weaving machines — Vocabulary

ISO 14500:2003 defines terms related to harnesses for Jacquard weaving machines used in the textile industry, with the aim of presenting a standardized, prescribed phraseology. It identifies the parts of, and positions on, the harness and establishes a nomenclature for those parts.

  • Standard
    12 pages
    English language
    sale 15% off
ISO
ISO 5247-3:1993(Main)
Textile machinery and accessories — Weaving machines — Part 3: Parts of the machine — Vocabulary

Defines 158 basic terms of parts of weaving machines in English, French, German and Chinese. The terms are classified under the following main headings: Designation of sides and measurements, Weaving machine frame, Drive, Warp and fabric control equipment, Shedding means, Weft insertion elements, Devices at selvedges, Stop motions in weaving. Only the terms and definitions given in the official languages English and French can be considered as ISO terms and definitions.

  • Standard
    50 pages
    English language
    sale 15% off
ISO
ISO 1586:1977(Main)
Textile machinery and accessories — Shuttles — Terms and designation in relation to the position of the shuttle eye

Gives an illustrated nomenclature of terms and a method of designation used in conventional weaving looms according to the position (left, right or centre) of the shuttle eye. - Replaces ISO Recommendation R 1586-1970.

  • Standard
    12 pages
    English language
    sale 15% off
ISO
ISO 14500:2003(Main)
Textile machinery and accessories — Harnesses for Jacquard weaving machines — Vocabulary

ISO 14500:2003 defines terms related to harnesses for Jacquard weaving machines used in the textile industry, with the aim of presenting a standardized, prescribed phraseology. It identifies the parts of, and positions on, the harness and establishes a nomenclature for those parts.

  • Standard
    12 pages
    English language
    sale 15% off
ISO
ISO 5247-3:1993(Main)
Textile machinery and accessories — Weaving machines — Part 3: Parts of the machine — Vocabulary

Defines 158 basic terms of parts of weaving machines in English, French, German and Chinese. The terms are classified under the following main headings: Designation of sides and measurements, Weaving machine frame, Drive, Warp and fabric control equipment, Shedding means, Weft insertion elements, Devices at selvedges, Stop motions in weaving. Only the terms and definitions given in the official languages English and French can be considered as ISO terms and definitions.

  • Standard
    50 pages
    English language
    sale 15% off
ISO
ISO 1586:1977(Main)
Textile machinery and accessories — Shuttles — Terms and designation in relation to the position of the shuttle eye

Gives an illustrated nomenclature of terms and a method of designation used in conventional weaving looms according to the position (left, right or centre) of the shuttle eye. - Replaces ISO Recommendation R 1586-1970.

  • Standard
    12 pages
    English language
    sale 15% off
ISO
ISO 3384-1:2024(Main)
Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 1: Testing at constant temperature

This document specifies two procedures for determining the decrease in counterforce exerted by a test piece of vulcanized or thermoplastic rubber which has been compressed to a constant deformation and maintained thus at a predetermined test temperature. The counterforce can be determined either by means of a continuous-measurement system or by a discontinuous-measurement one. Two test methods are specified, method A and method B. In method A the compression and all measurements of counterforce are made at test temperature and in method B the compression and all measurements of counterforce are made at standard laboratory temperature. Method A and method B do not give the same results, as in method B the shrinkage of the material from the test temperature to standard laboratory temperature is included in the result. Two forms of test piece are specified in this document: cylindrical test pieces and rings. Comparison of results is valid only when made on test pieces of similar size and shape. The use of ring test pieces is particularly suitable for the determination of stress relaxation in liquid environments. This document deals only with testing at constant ambient or elevated temperature. Testing at temperatures below standard laboratory temperature is not specified. The methods have been used for low‑temperature testing, but their reliability under these conditions is not proven.

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    15 pages
    French language
    sale 15% off
  • Draft
    14 pages
    English language
    sale 15% off
  • Draft
    14 pages
    English language
    sale 15% off
ISO
ISO 18562-1:2024(Main)
Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 1: Evaluation and testing within a risk management process

This document specifies: — the general principles governing the biological evaluation within a risk management process of the gas pathways of a medical device, its parts or accessories, which are intended to provide respiratory care or supply substances via the respiratory tract to a patient in all environments; — the general categorization of gas pathways based on the nature and duration of their contact with the gas stream; — the evaluation of existing relevant data from all sources; — the identification of gaps in the available data set on the basis of a risk analysis; — the identification of additional data sets necessary to analyse the biological safety of the gas pathway; — the assessment of the biological safety of the gas pathway. This document covers general principles regarding biocompatibility assessment of medical device materials, which make up the gas pathway, in normal use and normal condition. This document does not cover biological hazards arising from mechanical damage. The other parts of ISO 18562 cover specific tests that address potentially hazardous substances that are added to the respirable gas stream and establish acceptance criteria for these substances. This document addresses potential contamination of the gas stream arising from the gas pathways within the medical device, which might then be conducted to the patient. This document applies over the expected lifetime of the medical device when operated according to the instructions for use. This includes degradation arising from exposure to environmental conditions as well as cleaning, disinfection and sterilisation (i.e. processing). It also includes user action or inaction (omission) that leads to an unintended or unexpected outcome (result) (i.e. use error). It does not include conscious/intentional action or inaction that violates the instructions for use and is beyond reasonable risk control by the manufacturer (i.e. abnormal use). This document does not address biological evaluation of the surfaces of medical devices that have direct contact with the patient or user. The requirements for direct contact surfaces are found in the ISO 10993 series. Medical devices, parts or accessories containing gas pathways that are addressed by this document include, but are not limited to, ventilators, anaesthesia workstations (including gas mixers), breathing systems, oxygen conserving equipment, oxygen concentrators, nebulizers, low-pressure hose assemblies, humidifiers, heat and moisture exchangers, respiratory gas monitors, respiration monitors, masks, medical respiratory personal protective equipment, mouth pieces, resuscitators, breathing tubes, breathing system filters and Y-pieces as well as any breathing accessories intended to be used with such medical devices. The enclosed chamber of an incubator, including the mattress, and the inner surface of an oxygen hood are considered to be gas pathways and are also addressed by this document. This document does not address contamination already present in the gas supplied from the gas sources while medical devices are in normal use. EXAMPLE Contamination arriving at the medical device from gas sources such as medical gas pipeline systems (including the non-return valves in the pipeline outlets), outlets of pressure regulators connected or integral to a medical gas cylinder, or room air taken into the medical device is not addressed by ISO 18562 (all parts).

  • Standard
    34 pages
    English language
    sale 15% off
  • Standard
    35 pages
    French language
    sale 15% off
  • Draft
    40 pages
    English language
    sale 15% off
  • Draft
    40 pages
    English language
    sale 15% off
ISO
ISO/IEC 30137-1:2024(Main)
Information technology — Use of biometrics in video surveillance systems — Part 1: System design and specification

The ISO/IEC 30137 series is applicable to the use of biometrics in VSSs (also known as closed circuit television or CCTV systems) for a number of scenarios, including real-time operation against watchlists and in post-event analysis of video data. In most cases, the biometric mode of choice will be face recognition, but this document also provides guidance for other modalities, such as gait recognition. This document: — defines the key terms for use in the specification of biometric technologies in a VSS, including metrics for defining performance; — provides guidance on the selection of camera types, placement of cameras, image specification, etc., for the operation of a biometric recognition capability in conjunction with a VSS; — provides guidance on the composition of the gallery (or watchlist) against which facial images from the VSS are compared, including the selection of appropriate images of sufficient quality, and the size of the gallery in relation to performance requirements; — makes recommendations on data formats for facial images and other relevant information (including metadata) obtained from video footage, used in watchlist images, or from observations made by human operators; — establishes general principles for supporting the operator of the VSS, including user interfaces and processes to ensure efficient and effective operation, and highlights the need to have suitably trained personnel; — highlights the need for robust governance processes to provide assurance that the implemented security, privacy and personal data protection measures specific to the use of biometric technologies with a VSS (e.g. internationally recognizable signage) are fit for purpose, and that societal considerations are reflected in the deployed system. This document also provides information on related recognition and detection tasks in a VSS, such as: — estimation of crowd densities; — determination of patterns of movement of individuals; — identification of individuals appearing in more than one camera; — use of other biometric modalities such as gait or iris; — use of specialized software to infer attributes of individuals, e.g. estimation of gender and age; — interfaces to another related functionality, e.g. video analytics to measure queue lengths or to provide alerts for abandoned baggage.

  • Standard
    46 pages
    English language
    sale 15% off
  • Draft
    48 pages
    English language
    sale 15% off
  • Draft
    48 pages
    English language
    sale 15% off
ISO
ISO 18562-2:2024(Main)
Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 2: Tests for emissions of particulate matter

This document specifies tests for the emissions of particulate matter from the gas pathways of a medical device, its parts or accessories, which are intended to provide respiratory care or supply substances via the respiratory tract to a patient in all environments. The tests of this document are intended to quantify particles from 0,25 µm diameter to 10 µm diameter that are emitted by the medical device, its parts or accessories into the respirable gas stream. This document establishes acceptance criteria for these tests. This document does not address nanoparticles. Insufficient data exist to establish exposure limits for particles less than 0,25 µm diameter. This document does not address particles larger than 10 µm diameter. These particles are deposited in the nasal cavity. Additional information can be needed for medical devices or accessories that bypass the nose. This is outside the scope of this document but can be required by some authorities having jurisdiction. This document therefore adopts the same approach as the US Environmental Protection Agency (EPA) in setting limits based solely on particle size and not their chemistry. This document addresses potential contamination of the gas stream arising from the gas pathways, which is then conducted to the patient. This document applies over the expected lifetime of the medical device in normal use and takes into account the effects of any intended processing. This document does not address biological evaluation of the particles that are deliberately released by a nebulizer (i.e. the therapeutic agent). This document does not address biological evaluation of the surfaces of gas pathways that have direct contact with the patient. The requirements for direct contact surfaces are found in the ISO 10993 series. Medical devices, parts or accessories, containing gas pathways that are addressed by this document, include, but are not limited to, ventilators, anaesthesia workstations (including gas mixers), breathing systems, oxygen conserving devices, oxygen concentrators, nebulizers, low-pressure hose assemblies, humidifiers, heat and moisture exchangers, respiratory gas monitors, respiration monitors, masks, medical respiratory personal protective equipment, mouth pieces, resuscitators, breathing tubes, breathing systems filters, Y-pieces, and any breathing accessories intended to be used with such devices. The enclosed chamber of an incubator, including the mattress, and the inner surface of an oxygen hood are considered to be gas pathways and are also addressed by this document. This document does not address contamination already present in the gas supplied from the gas sources while medical devices are in normal use. EXAMPLE Contamination arriving at the medical device from gas sources such as medical gas pipeline systems (including the non-return valves in the pipeline outlets), outlets of pressure regulators connected or integral to a medical gas cylinder or room air taken into the medical device is not addressed by ISO 18562 (all parts).

  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    16 pages
    French language
    sale 15% off
  • Draft
    17 pages
    English language
    sale 15% off
  • Draft
    17 pages
    English language
    sale 15% off