EN 60444-11:2010

SLOVENSKI STANDARD
SIST EN 60444-11:2011
01-januar-2011
0HULWHYSDUDPHWURYNYDUþQRNULVWDQLKHQRWGHO6WDQGDUGQHPHWRGH]D
XJRWDYOMDQMHREUHPHQLWYHQHUHVRQDQþQHIUHNYHQFHI/LQHIHNWLYQHREUHPHQLWYHQH
NDSDFLWLYQRVWL&/HII]XSRUDERWHKQLN]DYWRPDWLþQLPRPUHåQLPDQDOL]DWRUMHPLQ
SRSUDYOMDQMHPQDSDN,(&
Measurement of quartz crystal unit parameters - Part 11: Standard method for the
determination of the load resonance frequency fL and the effective load capacitance
CLeff using automatic network analyzer techniques and error correction (IEC 60444-
11:2010)
Messung von Schwingquarz-Parametern - Teil 11: Standardverfahren zur Bestimmung
der Lastresonanzfrequenz fL und der effektiven Lastkapazität CLeff mit automatischer
Netzwerkanalysatortechnik und Fehlerkorrektur (IEC 60444-11:2010)
Mesure des paramètres des résonateurs à quartz - Partie 11: Méthode normalisée pour
la détermination de la fréquence de résonance à la charge fL et de la capacité de charge
efficace CLeff utilisant des analyseurs automatiques de réseaux et correction des erreurs
(CEI 60444-11:2010)
Ta slovenski standard je istoveten z: EN 60444-11:2010
ICS:
31.140 3LH]RHOHNWULþQHLQ Piezoelectric and dielectric
GLHOHNWULþQHQDSUDYH devices
SIST EN 60444-11:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60444-11:2011

---------------------- Page: 2 ----------------------

SIST EN 60444-11:2011

EUROPEAN STANDARD
EN 60444-11

NORME EUROPÉENNE
November 2010
EUROPÄISCHE NORM

ICS 31.140


English version


Measurement of quartz crystal unit parameters -
Part 11: Standard method for the determination of the load resonance
frequency f and the effective load capacitance C using automatic
L Leff
network analyzer techniques and error correction
(IEC 60444-11:2010)


Mesure des paramètres des résonateurs à Messung von Schwingquarz-Parametern -
quartz - Teil 11: Standardverfahren zur
Partie 11: Méthode normalisée pour la Bestimmung der Lastresonanzfrequenz f
L
détermination de la fréquence de und der effektiven Lastkapazität C mit
Leff
résonance à la charge f et de la capacité automatischer Netzwerkanalysatortechnik
L
de charge efficace C utilisant des
und Fehlerkorrektur
Leff
analyseurs automatiques de réseaux et (IEC 60444-11:2010)
correction des erreurs
(CEI 60444-11:2010)


This European Standard was approved by CENELEC on 2010-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60444-11:2010 E

---------------------- Page: 3 ----------------------

SIST EN 60444-11:2011
EN 60444-11:2010 - 2 -
Foreword
The text of document 49/852/CDV, future edition 1 of IEC 60444-11, prepared by IEC TC 49,
Piezoelectric, Dielectric and Electrostatic Devices and Associated Materials for Frequency Control,
Selection and Detection, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60444-11 on 2010-11-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2013-11-01
Annex ZA has been added by CENELEC.
__________
Endorsement not
...