EN ISO 24503:2011
(Main)Ergonomics - Accessible design - Tactile dots and bars on consumer products (ISO 24503:2011)
Ergonomics - Accessible design - Tactile dots and bars on consumer products (ISO 24503:2011)
ISO 24503:2011 specifies requirements for the design of tactile dots and tactile bars for use on consumer products to improve accessibility for everyone, including older persons and persons with disabilities.
ISO 24503:2011 is applicable to consumer products used by persons with visual disabilities, and in cases where visual information is not the primary sense used for accomplishing the task.
Alternative tactile methods, such as texture and vibration, and other tactile symbols, such as triangles and squares, are not covered in ISO 24503:2011.
Alternative feedback methods, such as in acoustic and visual modalities, are not covered in ISO 24503:2011.
Ergonomie - Zugängliche Gestaltung - Taktile Punkte und Striche auf Konsumgütern (ISO 24503:2011)
Diese Internationale Norm legt Anforderungen zur Gestaltung von taktilen Punkten und taktilen Strichen auf
Konsumgütern fest, um die Zugänglichkeit für jedermann, eingeschlossen alte Personen und Personen mit
Behinderung, zu verbessern.
Diese Internationale Norm ist auf Konsumgüter anwendbar, die von Personen mit Sehbehinderung benutzt
werden und in Fällen, bei denen eine visuelle Information nicht als die wichtigste Sinneswahrnehmung zum
Erledigen einer Aufgabe gilt.
Alternative taktile Methoden, wie Struktur und Vibration und andere taktile Symbole, wie Drei- und Vierecke,
werden in dieser Internationalen Norm nicht behandelt.
Alternative Methoden zur Rückmeldung, wie akustische und visuelle Modalitäten, werden in dieser
Internationalen Norm nicht behandelt.
Ergonomie - Conception accessible - Utilisation des points et barres tactiles sur les produits de consommation courante (ISO 24503:2011)
L'ISO 24503:2011 spécifie les exigences relatives à la conception des points et barres tactiles utilisés sur les produits de consommation courante, dans le but d'en améliorer l'accessibilité pour toutes les personnes, y compris les personnes âgées et les personnes en situation de handicap.
L'ISO 24503:2011 s'applique aux produits de consommation courante utilisés par les personnes présentant une insuffisance visuelle et dans les cas où l'information visuelle n'est pas primordiale pour l'exécution de la tâche.
D'autres méthodes tactiles, telles que texture et vibrations, et d'autres symboles tactiles, tels que triangles et carrés, ne sont pas couverts par l'ISO 24503:2011.
D'autres méthodes de retour d'information, par exemple dans les modalités acoustiques et visuelles, ne sont pas couvertes par l'ISO 24503:2011.
Ergonomija - Dostopno načrtovanje - Otipljive točke in črte na proizvodih, namenjenih potrošnikom (ISO 24503:2011)
Ta mednarodni standard določa zahteve za načrtovanje otipljivih točk in črt na proizvodu za uporabo na proizvodih, namenjenih potrošnikom za izboljšanje dostopnosti za vse, vključno s starejšimi in invalidnimi osebami. Ta mednarodni standard velja za izdelke za potrošnike, ki jih uporabljajo ljudje s poškodbami vida, in kadar vizualna informacija ni primarni čut, ki se uporablja za izpolnitev naloge. Druge metode za otipljivost, kot so tekstura ali vibriranje ter drugi otipljivi simboli, na primer trikotniki in kvadrati, niso zajeti v tem mednarodnem standardu. Druge metode za povratne informacije, kot so slišni in vidni načini, niso zajeti v tem mednarodnem standardu.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 24503:2011
01-julij-2011
(UJRQRPLMD'RVWRSQRQDþUWRYDQMH2WLSOMLYHWRþNHLQþUWHQDSURL]YRGLK
QDPHQMHQLKSRWURãQLNRP ,62
Ergonomics - Accessible design - Tactile dots and bars on consumer products (ISO
24503:2011)
Ergonomie - Zugängliche Gestaltung - Taktile Punkte und Striche auf Konsumgütern
(ISO 24503:2011)
Ergonomie - Conception accessible - Utilisation des points et barres tactiles sur les
produits de consommation courante (ISO 24503:2011)
Ta slovenski standard je istoveten z: EN ISO 24503:2011
ICS:
11.180.30 3ULSRPRþNLLQSULODJRGLWYH]D Aids and adaptations for
EUDQMH reading
13.180 Ergonomija Ergonomics
SIST EN ISO 24503:2011 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 24503:2011
---------------------- Page: 2 ----------------------
SIST EN ISO 24503:2011
EUROPEAN STANDARD
EN ISO 24503
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2011
ICS 11.180.30; 13.180
English Version
Ergonomics - Accessible design - Tactile dots and bars on
consumer products (ISO 24503:2011)
Ergonomie - Conception accessible - Utilisation des points Ergonomie - Zugängliche Gestaltung - Taktile Punkte und
et barres tactiles sur les produits de consommation Striche auf Konsumgütern (ISO 24503:2011)
courante (ISO 24503:2011)
This European Standard was approved by CEN on 29 January 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24503:2011: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 24503:2011
EN ISO 24503:2011 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 24503:2011
EN ISO 24503:2011 (E)
Foreword
This document (EN ISO 24503:2011) has been prepared by Technical Committee ISO/TC 159 "Ergonomics"
in collaboration with Technical Committee CEN/TC 122 “Ergonomics” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2011, and conflicting national standards shall be withdrawn at
the latest by August 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 24503:2011 has been approved by CEN as a EN ISO 24503:2011 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 24503:2011
---------------------- Page: 6 ----------------------
SIST EN ISO 24503:2011
INTERNATIONAL ISO
STANDARD 24503
First edition
2011-02-01
Ergonomics — Accessible design —
Tactile dots and bars on consumer
products
Ergonomie — Conception accessible — Utilisation des points et barres
tactiles sur les produits de consommation courante
Reference num
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.