EN ISO 7731:2005
(Main)Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
This International Standard specifies the physical principles of design, ergonomic requirements and the corresponding test methods for danger signals for public and work areas in the signal reception area and gives guidelines for the design of the signals. It may also be applied to other appropriate situations. The relevance given in the definitions as to the difference between an auditory emergency signal, auditory emergency evacuation signal and an auditory warning signal should be noted. The emergency evacuation signal is covered in ISO 8201. This International Standard does not apply to verbal danger warnings (e.g. shouts, loudspeaker announcements). ISO 9921 covers verbal danger signals. Special regulations such as those for a public disaster and public transport are not affected by this International Standard.
Ergonomie - Gefahrensignale für öffentliche Bereiche und Arbeitsstätten - Akustische Gefahrensignale (ISO 7731:2003)
Diese Internationale Norm legt die physikalischen Grundsätze der Gestaltung, ergonomische Anforderungen und die entsprechenden Prüfverfahren für Gefahrensignale für öffentliche Bereiche und Arbeitsstätten im Signalempfangsbereich fest und enthält Anleitungen für die Gestaltung der Signale. Sie kann auch auf weitere geeignete Situationen angewendet werden.
Die in den Definitionen angegebenen Unterschiede zwischen einem akustischen Notsignal, einem akustischen Notsignal für Räumung und einem akustischen Warnsignal sind zu beachten. Das Notsignal für Räumung wird in ISO 8201 behandelt.
Diese Internationale Norm gilt nicht für Gefahrenhinweise im Rahmen sprachlicher Verständigung (z. B. Zurufe, Lautsprecherdurchsagen). Mündlich gegebene Gefahrensignale werden in ISO 9921 behandelt.
Besondere Regelungen wie für den öffentlichen Katastrophenschutz und öffentlichen Verkehr bleiben von dieser Internationalen Norm unberührt.
Ergonomie - Signaux de danger pour lieux publics et lieux de travail - Signaux de danger auditifs (ISO 7731:2003)
Ergonomija – Signali za nevarnost na javnih in delovnih mestih – Zvočni signali za nevarnost (ISO 7731:2003)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 7731:2006
01-marec-2006
1DGRPHãþD
SIST EN 457:1998
(UJRQRPLMD±6LJQDOL]DQHYDUQRVWQDMDYQLKLQGHORYQLKPHVWLK±=YRþQLVLJQDOL]D
QHYDUQRVW ,62
Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO
7731:2003)
Ergonomie - Gefahrensignale für öffentliche Bereiche und Arbeitsstätten - Akustische
Gefahrensignale (ISO 7731:2003)
Ergonomie - Signaux de danger pour lieux publics et lieux de travail - Signaux de danger
auditifs (ISO 7731:2003)
Ta slovenski standard je istoveten z: EN ISO 7731:2005
ICS:
13.180 Ergonomija Ergonomics
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
SIST EN ISO 7731:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN ISO 7731
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2005
ICS 13.320; 13.180 Supersedes EN 457:1992
English Version
Ergonomics - Danger signals for public and work areas -
Auditory danger signals (ISO 7731:2003)
Ergonomie - Signaux de danger pour lieux publics et lieux Ergonomie - Gefahrensignale für öffentliche Bereiche und
de travail - Signaux de danger auditifs (ISO 7731:2003) Arbeitsstätten - Akustische Gefahrensignale (ISO
7731:2003)
This European Standard was approved by CEN on 2 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7731:2005: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 7731:2005 (E)
Foreword
The text of ISO 7731:2003 has been prepared by Technical Committee ISO/TC 159
"Ergonomics” of the International Organization for Standardization (ISO) and has been taken
over as EN ISO 7731:2005 by Technical Committee CEN/TC 122 "Ergonomics", the secretariat
of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by March 2006, and conflicting national
standards shall be withdrawn at the latest by March 2006.
This document supersedes EN 457:1992.
This document has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU
Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 7731:2003 has been approved by CEN as EN ISO 7731:2005 without any
modifications.
2
---------------------- Page: 3 ----------------------
EN ISO 7731:2005 (E)
ANNEX ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37 EEC
This European Standard has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association to provide a means of conforming to
Essential Requirements of the New Approach Directive 98/37 EEC, amended by 98/79/EEC.
Once this standard is cited in the Official Journal of the European Communities under that
Directive and has been implemented as a national standard in at least one Member State,
compliance with the normative clauses of this standard confers, within the limits of the scope o
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.