IEC 62148-21:2021 is available as IEC 62148-21:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62148-21: 2021 covers the design guidelines of the electrical interface for photonic integrated circuit (PIC) packages using silicon fine-pitch ball grid array (S-FBGA) and silicon fine-pitch land grid array (S-FLGA). In this document, the electrical interface for the S-FBGA package is informa...
view more

    • sale 15% off
    • Standard
      13 pages
      English language

IEC 62148-15:2021 is available as IEC 62148-15:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62148-15:2021 covers the physical dimension and interface specifications for discrete vertical cavity surface emitting laser (VCSEL) devices in optical telecommunication and optical data transmission applications. The intent of this document is to adequately specify the physical requirements of...view more

    • sale 15% off
    • Standard
      45 pages
      English and French language

IEC 61280-2-8:2021 is available as IEC 61280-2-8:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61280-2-8:2021 specifies two main methods for the determination of low BER values by making accelerated measurements. These include the variable decision threshold method (Clause 5) and the variable optical threshold method (Clause 6). In addition, a third method, the sinusoidal interfere...
view more

    • sale 15% off
    • Standard
      65 pages
      English and French language

IEC 61290-1-3:2021 is available as IEC 61290-1-3:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61290-1-3:2021 applies to all commercially available optical amplifiers (OA) and optically amplified subsystems. It applies to OA using optically pumped fibres (OFA based on either rare-earth doped fibres or on the Raman effect), semiconductors (SOA), and waveguides (POWA).
NOTE 1 The applic...
view more

    • sale 15% off
    • Standard
      33 pages
      English and French language

IEC TR 62572-4:2020 is available as IEC TR 62572-4:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC/TR 62572-4:2020, which is a Technical Report, provides guidelines for optical connector end-face cleaning methods for receptacle style optical transceivers. It includes details about handling receptacle style optical transceivers, internal structures of optical transceivers, information...
view more

    • sale 15% off
    • Technical report
      25 pages
      English language

IEC 61290-1-1:2020 is available as IEC 61290-1-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61290-1-1:2020 applies to all commercially available optical amplifiers (OAs) and optically amplified modules. It applies to OAs using optical fibre amplifiers (OFAs) based on either rare-earth doped fibres or on the Raman effect, semiconductor OAs (SOAs) and planar optical waveguide ampl...
view more

    • sale 15% off
    • Standard
      38 pages
      English and French language

IEC 62149-5:2020 is available as IEC 62149-5:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62149-5:2020 specifies performance on the transceiver modules for asynchronous-transfer-mode passive optical network (ATM-PON) systems recommended by the International Telecommunication Union (ITU) in ITU-T Recommendation G.983.1. This third edition cancels and replaces the second edition pub...
view more

    • sale 15% off
    • Standard
      51 pages
      English and French language

IEC 61757-4-3: 2020 defines terminology, structure, and a characteristic test method of an optical current sensor using the polarimetric method. It addresses the current sensing element only and not the additional devices that are unique to each application. Generic specifications for fibre optic sensors are defined in IEC 61757. As the specifications of optical polarimetric fibre current sensors required by each user vary depending on the application, this document does not define the required ...view more

    • sale 15% off
    • Standard
      99 pages
      English and French language

IEC 61280-4-5:2020 is applicable to the measurement of attenuation and determination of polarity and length of installed multimode and single-mode optical fibre cabling plant, terminated with MPO connectors, using test equipment having an MPO interface. This cabling plant can include multimode or single-mode optical fibres, connectors, adapters, splices, and other passive devices. The cabling can be installed in a variety of environments including residential, commercial, industrial, and data ce...view more

    • sale 15% off
    • Standard
      73 pages
      English language
    • sale 15% off
    • Standard
      149 pages
      English and French language

IEC 62149-3:2020 is available as IEC 62149-3:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62149-3:2020 covers the performance specification for electroabsorption (EA) type optical modulators monolithically integrated with laser diodes for 40 Gbit/s fibre optic transmission systems. This document contains a definition of the product performance requirements together with a series of ...
view more

    • sale 15% off
    • Standard
      30 pages
      English and French language

IEC 62614-1:2020 describes the launch condition requirements used for measuring multimode attenuation in passive components and in installed cable plants. In this document, the fibre types that are addressed include category A1-OMx, where x = 2, 3, 4 and 5 (50 µm/125 µm), and A1-OM1 (62,5 µm/125 µm) multimode fibres, as specified in IEC 60793-2-10. The nominal test wavelengths detailed are 850 nm and 1 300 nm. This document can be suitable for multimode attenuation measurements for other multimo...view more

    • sale 15% off
    • Standard
      12 pages
      English language
    • sale 15% off
    • Standard
      25 pages
      English and French language

IEC 62149-11: 2020 specifies the performance standards for a multiple channel transmitter/receiver chip scale package (CSP) with multimode fibre interface that operates at up to 28 Gbit/s per channel. It specifies the parameters that apply, with clearly defined conditions, severities, and pass/fail criteria. The tests are intended to be run as an initial design verification to prove any product's ability to satisfy the performance standard's requirements. A product that has been shown to meet al...view more

    • sale 15% off
    • Standard
      29 pages
      English and French language

IEC 62343-3-3:2020 is available as IEC 62343-3-3:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62343-3-3:2020 provides a performance specification template for wavelength selective switches. The object is to provide a framework for the preparation of detail specifications on the performance of wavelength selective switches. Additional specification parameters are often included for...
view more

    • sale 15% off
    • Standard
      25 pages
      English and French language

IEC 61757-1-1:2020 is available as IEC 61757-1-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61757-1-1:2020 defines detail specifications for fibre optic sensors using one or more fibre Bragg gratings (FBG) as the sensitive element for strain measurements. Generic specifications for fibre optic sensors are defined in IEC 61757. This document specifies the most important features a...
view more

    • sale 15% off
    • Standard
      108 pages
      English and French language

IEC TR 61292-3:2020 which is a Technical Report, establishes the classification of optical amplifiers (OAs). It also includes a brief description of each amplifier, its general properties, performance, configurations and applications. This second edition cancels and replaces the first edition published in 2003. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:  
document architecture now focuses ...
view more

    • sale 15% off
    • Technical report
      28 pages
      English language

IEC 62148-6:2020 is available as IEC 62148-6:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62148-6:2020 covers the physical interface specification of optical transceivers for asynchronous transfer mode-passive optical network (ATM-PON) systems recommended by the International Telecommunication Union (ITU) as ITU Recommendation G.983.1. This second edition cancels and replaces the ...
view more

    • sale 15% off
    • Standard
      24 pages
      English and French language

IEC/TR 62343-6-11: 2019 which is a Technical Report, proposes a software and hardware interface for the optical multicast switch (MCS). This switch can be controlled by resident firmware within the interface that is intended to enable a user or host to retrieve the switch status and/or adjust relevant switch settings. The MCS is defined in IEC 62343-3-4. The technical information regarding MCS and its applications in dense wavelength division multiplexing (DWDM) systems is described in IEC TR 62...view more

    • sale 15% off
    • Technical report
      16 pages
      English language

IEC 62343-2-1:2019 provides a reliability qualification test template for dynamic modules (DMs). The template describes the reliability qualification test items and provides information on requirements or options. Example test conditions are given for information purposes in Annex A. For reliability qualification purposes, some information about the internal components, parts and interconnections is needed. These internal parts are treated as black boxes. This document gives requirements for the...view more

    • sale 15% off
    • Standard
      25 pages
      English and French language

IEC TR 61282-14:2019 is available as IEC TR 61282-14:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC TR 61282-14:2019 which is a Technical Report, establishes the detailed analysis and calculation of the uncertainties related to the measurement of the attenuation of both multimode and single mode optical fibre cabling using optical light sources and power meters. This second edition ...
view more

    • sale 15% off
    • Technical report
      41 pages
      English language

IEC TR 61282-5:2019 which is a Technical Report, describes various techniques for accommodation and compensation of chromatic dispersion in fibre optic communication systems. These techniques include dispersion compensation with passive optical components, advanced dispersion management, and electronic accommodation of dispersion in the transmitters and receivers. This second edition cancels and replaces the first edition, published in 2002, and constitutes a technical revision. This edition inc...view more

    • sale 15% off
    • Technical report
      34 pages
      English language

IEC 61280-4-1: 2019 is applicable to the measurement of attenuation of installed optical fibre cabling plant using multimode optical fibre. This cabling plant can include multimode optical fibres, connectors, adapters, splices, and other passive devices. The cabling can be installed in a variety of environments including residential, commercial, industrial, and data centre premises, as well as outside plant environments. The test equipment used in this document has one single fibre connector int...view more

    • sale 15% off
    • Standard
      153 pages
      English and French language

IEC 62148-19: 2019 covers the photonic chip scale package. The purpose of this document is to specify adequately the physical requirements of optical transmitters and receivers that will enable mechanical interchangeability of transmitters and receivers.
Keywords: physical interface for photonic chip scale packages

    • sale 15% off
    • Standard
      78 pages
      English and French language

IEC 62148-21:2019 covers the design guide of the electrical interface for photonic integrated circuit (PIC) packages using silicon fine-pitch ball grid array (S-FBGA) and silicon fine-pitch land grid array (S-FLGA). In this document, the electrical interface for the S-FBGA package is informative. The purpose of this document is to specify adequately the electrical interface of PIC packages composed of optical transmitters and receivers that enable mechanical and electrical interchangeability of ...view more

    • sale 15% off
    • Standard
      25 pages
      English and French language

IEC 62343-1:2019 provides general conditions for the standard performance of optical dynamic modules. All performance standards of dynamic modules are based on the general conditions defined in this document. Additional conditions are included in individual performance standards. This second edition cancels and replaces the first edition, published in 2016, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition...view more

    • sale 15% off
    • Standard
      17 pages
      English and French language

IEC TR 61292-8:2019, which is a technical report, deals with high-power optical amplifiers. It provides general information relating to high-power optical amplifiers with an output power greater than 500 mW for the fibre communication field. It covers the following aspects:
- general information;
- example of the optical amplifier's configuration realizing high optical output power;
- test method for optical output power and gain;
- considerations on high-power optical amplifiers.
Potential...
view more

    • sale 15% off
    • Technical report
      18 pages
      English language

IEC 62149-10:2018 covers the performance specification for radio-over-fibre (RoF) transceivers used for mobile fronthaul systems. The performance standard contains a definition of the product performance requirements together with a series of tests and measurements with clearly defined conditions, severities, and pass/fail criteria. The tests are intended to be run on a one-off basis to prove any product's ability to satisfy the performance standard's requirements. A product that has been shown ...view more

    • sale 15% off
    • Standard
      36 pages
      English and French language

IEC 61290-4-4:2018 applies to optical amplifiers (OAs) and optically amplified elementary sub-systems. More specifically, it applies to OAs using active fibres (optical fibre amplifiers, OFAs) containing rare-earth dopants, such as erbium doped fibre amplifiers (EDFAs), presently commercially available, as indicated in IEC 61291-1. This document provides the general background for optical amplifier gain transients and their measurements and indicates those IEC standard test methods for accurate ...view more

    • sale 15% off
    • Standard
      27 pages
      English and French language

IEC 62343-3-4: 2018 provides a performance specification template for multicast optical switches. The object is to provide a framework for the preparation of performance specifications or product specifications of multicast optical switches. Specification parameters required in this document are considered as essential in the product specifications or performance specifications.
Keywords: multicast optical switch (MCOS)

    • sale 15% off
    • Standard
      37 pages
      English and French language

IEC 61290-4-3:2018 applies to output power controlled optically amplified, elementary sub‑systems. It applies to optical fibre amplifiers (OFAs) using active fibres containing rare‑earth dopants, presently commercially available, as indicated in IEC 61291-1, as well as alternative optical amplifiers that can be used for single channel output power controlled operation, such as semiconductor optical amplifiers (SOAs). The object of this document is to provide the general background for optical am...view more

    • sale 15% off
    • Standard
      51 pages
      English and French language

IEC 61291-1:2018 applies to all commercially available optical amplifiers (OAs) and optically amplified assemblies. It applies to OAs using optically pumped fibres (OFAs based either on rare-earth doped fibres or on the Raman effect), semiconductors (SOAs), and waveguides (POWAs). The object of this document is
- to establish uniform requirements for transmission, operation, reliability and environmental properties of OAs, and
- to provide assistance to the purchaser in the selection of consis...
view more

    • sale 15% off
    • Standard
      58 pages
      English and French language

IEC 61757:2018 is a generic specification covering optical fibres, components and sub-assemblies as they pertain specifically to fibre optic sensing applications. It has been designed to be used as a common working and discussion tool by the vendors of components and subassemblies intended to be integrated in fibre optic sensors, as well as by designers, manufacturers and users of fibre optic sensors independent of any application or installation. The objective of this document is to define, cla...view more

    • sale 15% off
    • Standard
      73 pages
      English and French language

IEC 62343-5-2:2018 describes the measurement methods of dynamic crosstalk during port switching for 1 x N fixed-grid wavelength selective switches (WSSs). The objective of this document is to establish a standard test method for different-channel dynamic crosstalk and same-channel dynamic crosstalk that occur when a particular optical channel signal is switched to the specific branching port against a common port in ITU‑T 50 GHz and 100 GHz fixed grid 1 x N (N ≥ 3) WSSs.

    • sale 15% off
    • Standard
      42 pages
      English and French language

IEC 61281-1:2017 is a generic specification for fibre optic communication subsystems (FOCSs). The parameters defined herein form a specifiable minimum set of specifications that are common to all fibre optic subsystems. Additional parameters can be used depending on the particular application and technology. Those additional parameters will be specified in the relevant documents, as appropriate. Each specified parameter is measured using one of the test procedures. The use of these parameters fo...view more

    • sale 15% off
    • Standard
      80 pages
      English and French language

IEC TR 61292-9:2017(E) which is a Technical Report, focuses on semiconductor optical amplifiers (SOAs), especially the specific features and measurement of gain and polarization dependent gain (PDG). In this document, only the amplifying application of SOAs is described. Other applications, such as modulation, switching and non-linear functions, are not covered. Potential applications of SOAs, however, such as reflective SOAs (RSOAs) for the seeded wavelength division multiplexing passive optica...view more

    • sale 15% off
    • Technical report
      24 pages
      English language

IEC 62148-1:2017 aims to assure interchangeability in physical interfaces between fibre optic active components and devices supplied by different manufacturers, but it does not guarantee operation between such devices. This second edition cancels and replaces the first edition, published in 2002, and constitutes a technical revision. This edition includes the following significant technical change with respect to the previous edition: addition of a free space optical coupling interface in Clause...view more

    • sale 15% off
    • Standard
      21 pages
      English and French language

IEC 62343:2017 applies to all commercially available optical dynamic modules and devices. It describes the products covered by the IEC 62343 series, defines terminology, fundamental considerations and basic approaches. The object of this document is to: establish uniform requirements for operation, reliability and environmental properties of dynamic modules (DMs) to be implemented in the appropriate DM standard, and provide assistance to the purchaser in the selection of consistently high-qualit...view more

    • sale 15% off
    • Standard
      24 pages
      English language
    • sale 15% off
    • Standard
      50 pages
      English and French language

IEC 62150-5:2017 specifies test and measurement procedures for the wavelength channel tuning time of tuneable transmitters. It applies to laser transmitters, and to the transmitter portion of transceivers. This procedure examines whether the device or module satisfies the appropriate performance specification. The method described in this document uses optical filters to transfer the transition of the output wavelength to the transition of the optical power. This is because the transient respons...view more

    • sale 15% off
    • Standard
      28 pages
      English and French language

IEC TR 63072-1:2017(E) which is a Technical Report, provides an introduction to photonic integrated circuits (PICs) and describes a roadmap for the standardization of PIC technology over the next decade.

    • sale 15% off
    • Technical report
      46 pages
      English language

IEC TR 61282-15:2017 provides guidance for the testing of multi-fibre cable, multimode or single-mode, terminated with plugs described in IEC 61754­7 (all parts) (multiple-fibre push on – MPO). Guidance is provided on the measurement of attenuation, polarity, length and optical return loss. The cabling can be installed in a variety of environments, including residential, commercial, industrial, and data centre premises, and possibly in outside plant environments.
Keywords: attenuation, polarity...
view more

    • sale 15% off
    • Technical report
      21 pages
      English language

IEC TR 62343-6-10:2017(E) which is a Technical Report, discusses the rationale, conceptual definition, and minimum list of functions for an intermediate controller that delivers a dynamic control signal to multiple dynamic modules. These modules are included in an optical-switch-based network node, according to the upper layer controller of software-defined optical networking.

    • sale 15% off
    • Technical report
      15 pages
      English language

IEC 61280-4-4:2017 provides uniform methods of measuring polarization mode dispersion (PMD) of single-mode installed links. An installed link is the optical path between transmitter and receiver, or a portion of that optical path. These measurements can be used to assess the suitability of a given link for high bit rate applications, or to provide insight on the relationships of various related transmission attributes. This document focuses on the measurement methods and requirements for measuri...view more

    • sale 15% off
    • Standard
      82 pages
      English language
    • sale 15% off
    • Standard
      169 pages
      English and French language

IEC TR 62343-6-4:2017(E) which is a Technical Report on reconfigurable optical add/drop multiplexers (ROADMs), provides a description of the ROADMs in dynamic optical networks and related optical component and module technologies, including wavelength selective switches (WSSs).

    • sale 15% off
    • Technical report
      28 pages
      English language

IEC 61291-5-2:2017 applies to optical amplifiers (OAs) and optically amplified, elementary sub-systems for terrestrial applications, using active fibres (optical fibre amplifiers (OFAs)) containing rare-earth dopants, which are commercially available. The black box approach is used in this document. The black box approach is adopted in order to give product specifications which are independent of OA implementation details. For reliability qualification purposes, some information about the intern...view more

    • sale 15% off
    • Standard
      15 pages
      English language
    • sale 15% off
    • Standard
      30 pages
      English and French language

IEC TR 62343-6-6:2017(E) which is a Technical Report, describes failure mode effect analysis (FMEA) for optical units of dynamic modules. FMEA is one of the effective and useful analysis methods to determine the reliability evaluation test items and conditions that are defined in future reliability qualification documents. In order to estimate the lifetime for a module, there is a typical procedure. The first step is to identify the dominant failure modes. The second step is to determine the acc...view more

    • sale 15% off
    • Technical report
      29 pages
      English language

IEC 61290-4-1:2016 applies to optical amplifiers (OAs) using active fibres (optical fibre amplifiers (OFAs)) containing rare-earth dopants including erbium-doped fibre amplifiers (EDFAs) and optically amplified elementary sub-systems. These amplifiers are commercially available and widely deployed in service provider networks. The object of document is to provide the general background for OFA transients and related parameters, and to describe a standard test method for accurate and reliable mea...view more

    • sale 15% off
    • Standard
      39 pages
      English and French language

IEC 62343-3-2:2016 provides a performance specification template for optical channel monitors. The objective of this performance specification template is to provide a framework for the performance specification of the optical channel monitor. Additional specification parameters may be included for detailed product specifications or performance specifications. However, specification parameters specified in this document should not be removed from the detail product specifications or performance ...view more

    • sale 15% off
    • Standard
      12 pages
      English language
    • sale 15% off
    • Standard
      25 pages
      English and French language

IEC 61757-2-2:2016 defines detail specifications for distributed temperature measurement by a fibre optic sensor, also known as fibre optic distributed temperature sensing (DTS). DTS includes the use of Raman scattering, Brillouin scattering and Rayleigh scattering effects. In addition, Raman scattering and Rayleigh scattering based measurements are performed with a single-ended fibre configuration only. Brillouin scattering based measurements are performed with a single-ended fibre or fibre loo...view more

    • sale 15% off
    • Standard
      31 pages
      English language
    • sale 15% off
    • Standard
      65 pages
      English and French language

IEC 62343-3-1:2016 provides a performance specification template for the dynamic channel equalizer (DCE). The object of this performance specification template is to provide a framework for the preparation of detail specifications on the product or performance of dynamic channel equalizers. Additional specification parameters may be included for product specifications or performance specifications. However, specification parameters specified in this standard should not be removed from the produc...view more

    • sale 15% off
    • Standard
      20 pages
      English and French language

IEC TR 61282-9:2016(E) which is a Technical Report, describes effects and theory of polarization mode dispersion (PMD) and provides guidance on PMD measurements. This second edition cancels and replaces the first edition published in 2006. This second edition includes the following significant technical changes with respect to the previous edition:
- much of the theory has been condensed - focusing only on content that is needed to explain the test method;
- symbols have been removed, but abbr...
view more

    • sale 15% off
    • Technical report
      55 pages
      English language

IEC 62343-4-1:2016 describes and provides specifications for a software and hardware interface for the 1 x 9 wavelength selective switch. These switches can be controlled by resident firmware with this interface. This standard addresses the configuration and function to control a WSS. This interface is intended to enable a user or host to retrieve the switch status and/or adjust relevant switch and attenuation settings.

    • sale 15% off
    • Standard
      62 pages
      English and French language