IEC 63365:2022 applies to products used in the process measurement, control and automation industry. It establishes a concept and requirements for the digital nameplate and provides alternative electronically readable solutions (e.g. 2D codes, RFID or firmware) to current conventional plain text marking on the nameplate or packaging of products. The digital nameplate information is contained in the electronically readable medium affixed to the product, the packaging or accompanying documents. The digital nameplate information is available offline without Internet connection. After electronic reading, all digital nameplate information is displayed in a human readable text format. The digital nameplate also includes the Identification Link String according to IEC 61406-1 which provides additional online information for the product. This document does not specify the contents of the conventional nameplate, which are subject to regional or national regulations and standards.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61326-2-1:2020 is available as IEC 61326-2-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61326:2020 specifies more detailed test configurations, operational conditions and performance criteria for equipment with test and measurement circuits (internal or, external to the equipment, or both) that are not EMC protected for operational and/or functional reasons, as specified by the manufacturer. The manufacturer specifies the environment for which the product is intended to be used and selects the appropriate test level specifications of IEC 61326-1:2020.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61326-2-5:2020 is available as IEC 61326-2-5:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61326-2-5:2020 treats the particular features for EMC testing of field devices with field bus interfaces. This part of IEC 61326 covers only the field bus interface of the equipment. This part refers only to field devices intended for use in process control and process measuring. In this document, field devices with interfaces according to IEC 61784-1:2019, CP 3/2 and CP 1/1 as defined in IEC 61784 are covered. Other field bus interfaces may be included in future editions of this document.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61326-2-4:2020 is available as IEC 61326-2-4:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61326-2-4:2020 specifies more detailed test configurations, operational conditions and performance criteria than IEC 61326-1 for equipment for - insulation monitoring according to IEC 61557-8; - insulation fault location according to IEC 61557-9. This applies to insulation monitoring devices and for equipment for insulation fault location systems permanently or semi-permanently connected to the distribution system.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61326-2-3:2020 is available as IEC 61326-2-3:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61326-2-3:2020 specifies more detailed test configurations, operational conditions and performance criteria for transducers with integrated or remote signal conditioning. This document applies only to transducers characterized by their ability to transform, with the aid of an auxiliary energy source, a non-electric quantity to a process-relevant electrical signal, and to output the signal at one or more PORTS. This document includes transducers for electrochemical and biological measured quantities. The transducers covered by this document can be powered by AC or DC voltage and/or by battery or with internal power supply.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61326-2-2:2020 is available as IEC 61326-2-2:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61326-2-2:2020 specifies more detailed test configurations, operational conditions and performance criteria for equipment covered by Annex A of IEC 61326-1:2020 which is: - used for testing, measuring or monitoring of protective measures in low-voltage distribution systems, and; - powered by battery and/or from the circuit measured, and - portable. Examples of such EUTs include, but are not limited to, voltage detectors, insulation testers, earth continuity testers, earth resistance testers, leakage current clamps, loop impedance testers, “residual-current-device-testers” (RCD-testers) and phase sequence testers as defined in IEC 61557 (all parts).

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61010-2-202:2020 is available as IEC 61010-2-202:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61010-2-202:2020 constitutes Part 2-202 of a planned series of standards on industrial-process measurement, control and automation equipment. Safety terms of general use are defined in IEC 61010-1. More specific terms are defined in each part. This part incorporates the safety related requirements of electrically operated valve ACTUATORs and SOLENOIDs. This document does not cover functional safety aspects of electrically operated ACTUATORs and SOLENOIDs.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Technical Report (TR) explains and provides guidance on the common application of IEC 61508 and IEC 62443 in the area of industrial-process measurement, control and automation. This document may apply to other industrial sectors where IEC 61508 and IEC 62443 are applied.

  • Technical report
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to controller device interfaces that provide defined interfaces between low voltage switchgear, controlgear, control circuit devices, switching elements and controlling devices (e.g. programmable controllers, personal computers, etc.). It may also be applied for the interfacing of other devices and elements to a controller device interface. This standard specifies requirements for controllers and devices utilising these interfaces, including not only the communication protocol specification, but also associated relevant electrical and mechanical characteristics. It also specifies the electrical and EMC tests required to verify the performance of each controller device interface when connected to the appropriate controllers and devices. This part 1 establishes a consistent terminology and format for the subsequent interfaces. It also harmonises requirements of a general nature in order to reduce the need for testing to different standards, increase understanding and facilitate comparisons of controller device interface standards. Those requirements of the various controller device interface standards which can be considered as general have therefore been gathered in this part 1. In addition to meeting the specific requirements stated in this part 1, the controller device interfaces included in this standard  are documented in the English language in accordance with the requirements specified in this part 1,  are already in use in commercial products and running in industrial plants,  are available in quantity and at low price,  are available from several sources and commercialised openly,  to satisfy the tests specified, amongst others, in EN 61000 4 2, EN 61000 4 3, EN 61000 4 4, EN 61000 4 5, and EN 61000 4 6 against the test levels specified in EN 50082 2,  have appropriate mechanisms for transmission error detection,  are open, widely accepted, well documented, stable and support inter operability,  are complete and describe the necessary interfaces in sufficient detail to enable error free implementation,  are free of any restriction related to testing the implementation. For each controller device interface only two documents are necessary to determine all requirements and tests:  the general requirements of this standard, referred to as "part 1" in the relevant parts covering the various types of controller device interfaces;  the relevant controller device interface standard hereinafter referred to as the "relevant controller device interface standard" or "controller device interface standard". The solutions described in this standard have been used for many years by industry to solve application requirements involving low voltage switchgear and controlgear. They are characterised by:  their ability to power connected devices directly from the network;  their ability to operate in harsh environments typified by those encountered at the machine level by controls in industrial applications;  usage of the sophisticated medium access rules of CAN which allows both organisation of traffic based on user assigned priorities and efficient resolution of occasional access conflict;  a wide range of exchange services allowing precise tailoring of data exchange to the actual application needs as well as simultaneous distribution of data to a selected set of connected devices;  their capability to simultaneously support data acquisition, diagnostics, messaging and programming/configuration as required, amongst others, for systems interfacing controllers to low voltage switchgear and controlgear in industrial applications. NOTE The controller device interface standards currently part of this series are:  EN 50325 2: DeviceNet  EN 50325 3: Smart Distributed System (SDS)  EN 50325-4: CANopen  EN 50325-5 : Functional safety communication based on EN 50325-4

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of the IEC 62443 series provides detailed technical control system requirements (SRs) associated with the seven foundational requirements (FRs) described in IEC 62443‑1‑1 including defining the requirements for control system capability security levels, SL-C(control system). These requirements would be used by various members of the industrial automation and control system (IACS) community along with the defined zones and conduits for the system under consideration (SuC) while developing the appropriate control system target SL, SL-T(control system), for a specific asset.
As defined in IEC 62443‑1‑1 there are a total of seven FRs:
a) Identification and authentication control (IAC),
b) Use control (UC),
c) System integrity (SI),
d) Data confidentiality (DC),
e) Restricted data flow (RDF),
f) Timely response to events (TRE), and
g) Resource availability (RA).
These seven requirements are the foundation for control system capability SLs, SL-C (control system). Defining security capability at the control system level is the goal and objective of this standard as opposed to target SLs, SL-T, or achieved SLs, SL-A, which are out of scope.
See IEC 62443‑2‑1 for an equivalent set of non-technical, program-related, capability SRs necessary for fully achieving a control system target SL.

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Applies to gas analyzers using high temperature electrochemical sensors for measurement of oxygen in gas. Applies to both 'in situ' and extractive analyzers installed indoors or outdoors.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-6-23:2019 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 2 fieldbus. The term “time-critical” is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. This International Standard specifies interactions between remote applications and defines the externally visible behavior provided by the Type 2 fieldbus application layer. The purpose of this document is to define the protocol provided to a) define the wire-representation of the service primitives defined in this document, and b) define the externally visible behavior associated with their transfer. This document specifies the protocol of the Type 2 fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). This second edition includes the following significant technical changes with respect to the previous edition: - addition of the transmission extended mode and related attribute (Clauses 3.2.28, 4.1.9, 4.4, 5.2.9.2, and 5.3); - update of Table 4, Table 5, Table 16 and Table 48.

  • Standard
    228 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61207-3:2019 is available as IEC 61207-3:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 61207-3:2019 applies to the three main methods for measuring oxygen by its paramagnetic property, which are outlined in the introduction. It considers essential ancillary units and applies to analyzers installed indoors and outdoors. Safety-critical applications can require additional requirements from system and analyzer specifications not covered in this document. This document is intended: - to specify terminology and definitions related to the functional performance of paramagnetic gas analyzers for the measurement of oxygen in a source gas; - to unify methods used in making and verifying statements on the functional performance of such analyzers; - to specify what tests are performed to determine the functional performance and how such tests are carried out; - to provide basic documents to support the application of internationally recognized quality management standards. This third edition cancels and replaces the second edition published in 2002. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) all references (normative and informative) have been updated, deleted or added to as appropriate; b) all the terms, descriptions and definitions relating to the document have been updated where appropriate; c) all references to “errors” have been replaced by “uncertainties” and appropriate updated definitions applied.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-6-25:2019 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 2 fieldbus. The term “time-critical” is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. This International Standard specifies interactions between remote applications and defines the externally visible behavior provided by the Type 2 fieldbus application layer. The purpose of this document is to define the protocol provided to a) define the wire-representation of the service primitives defined in this document, and b) define the externally visible behavior associated with their transfer. This document specifies the protocol of the Type 2 fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545).

  • Standard
    127 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-6-4:2019 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 2 fieldbus. The term “time-critical” is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. This International Standard specifies interactions between remote applications and defines the externally visible behavior provided by the Type 2 fieldbus application layer. The purpose of this document is to define the protocol provided to a) define the wire-representation of the service primitives defined in this document, and b) define the externally visible behavior associated with their transfer. This document specifies the protocol of the Type 2 fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). This third edition includes the following significant technical changes with respect to the previous edition: a) additional user parameters to services; b) additional services to support distributed objects; c) additional secure services.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-6-2:2019 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 2 fieldbus. The term “time-critical” is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. This International Standard specifies interactions between remote applications and defines the externally visible behavior provided by the Type 2 fieldbus application layer. The purpose of this document is to define the protocol provided to a) define the wire-representation of the service primitives defined in this document, and b) define the externally visible behavior associated with their transfer. This document specifies the protocol of the Type 2 fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). This fourth edition includes the following significant technical changes with respect to the previous edition: - clarifications of response PDU formats in case of failure in 4.1.5; - clarifications of connection request priority definition and handling in 4.1.6.5 and 4.1.6.6; - clarification of connection remaining path in 4.1.6.12; - extensions of general syntax in 4.1.8.1; - extensions and clarifications of Identity object PDUs in 4.1.8.2; - updates of Assembly object PDUs in 4.1.8.4; - extensions and clarification of Time sync object PDUs in 4.1.8.6; - updates of Parameter object PDUs in 4.1.8.7; - extensions of Connection Manager object PDUs in 4.1.8.8; - clarifications of Connection object PDUs in 4.1.8.9; - extensions and clarifications of message and connection paths in 4.1.9; - updates of object and service class codes in 4.1.10 and error codes in 4.1.11; - updates of data types in 4.2.4, 5.1.3 and 5.2.3; - updates of the encapsulation abstract syntax in 4.3; - updates to the DLL mapping protocol machine 2 in Clause 11; - miscellaneous editorial corrections.

  • Standard
    276 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-6-26:2019 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 2 fieldbus. The term “time-critical” is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. This International Standard specifies interactions between remote applications and defines the externally visible behavior provided by the Type 2 fieldbus application layer. The purpose of this document is to define the protocol provided to a) define the wire-representation of the service primitives defined in this document, and b) define the externally visible behavior associated with their transfer. This document specifies the protocol of the Type 2 fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545).

  • Standard
    187 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-6-3:2019 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 2 fieldbus. The term “time-critical” is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. This International Standard specifies interactions between remote applications and defines the externally visible behavior provided by the Type 2 fieldbus application layer. The purpose of this document is to define the protocol provided to a) define the wire-representation of the service primitives defined in this document, and b) define the externally visible behavior associated with their transfer. This document specifies the protocol of the Type 2 fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). This fourth edition includes the following significant technical changes with respect to the previous edition: - corrected substitutions in Table 4; - corrections in 5.3.14; - corrections in 5.5.6; - corrections in 5.17.15; - corrections in 5.17.16.2; - spelling and grammar.

  • Standard
    381 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-6-19:2019 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 2 fieldbus. The term “time-critical” is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. This International Standard specifies interactions between remote applications and defines the externally visible behavior provided by the Type 2 fieldbus application layer. The purpose of this document is to define the protocol provided to a) define the wire-representation of the service primitives defined in this document, and b) define the externally visible behavior associated with their transfer. This document specifies the protocol of the Type 2 fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). This fourth edition includes the following significant technical changes with respect to the previous edition: - improving the hotplug and redundancy features; - improving the phase switching and the error handling; - editorial improvements.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-6-21:2019 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 2 fieldbus. The term “time-critical” is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. This International Standard specifies interactions between remote applications and defines the externally visible behavior provided by the Type 2 fieldbus application layer. The purpose of this document is to define the protocol provided to a) define the wire-representation of the service primitives defined in this document, and b) define the externally visible behavior associated with their transfer. This document specifies the protocol of the Type 2 fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). This second edition includes the following significant technical changes with respect to the previous edition: - added WriteAndRead service; - miscellaneous editorial corrections.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-6-12:2019 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 2 fieldbus. The term “time-critical” is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. This International Standard specifies interactions between remote applications and defines the externally visible behavior provided by the Type 2 fieldbus application layer. The purpose of this document is to define the protocol provided to a) define the wire-representation of the service primitives defined in this document, and b) define the externally visible behavior associated with their transfer. This document specifies the protocol of the Type 2 fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). This fourth edition includes the following significant technical changes with respect to the previous edition: - technical corrections; and - editorial improvements for clarification.

  • Standard
    146 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-6-10:2019 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 2 fieldbus. The term “time-critical” is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. This International Standard specifies interactions between remote applications and defines the externally visible behavior provided by the Type 2 fieldbus application layer. The purpose of this document is to define the protocol provided to a) define the wire-representation of the service primitives defined in this document, and b) define the externally visible behavior associated with their transfer. This document specifies the protocol of the Type 2 fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). This fourth edition includes the following significant technical changes with respect to the previous edition: a) integration of system redundancy basic functionality; b) integration of dynamic reconfiguration basic functionality; c) integration of reporting system basic functionality; d) integration of asset management basic functionality; e) integration of media redundancy ring interconnection basic functionality.

  • Standard
    899 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61131-10:2019 specifies an XML-based exchange format for the export and import of IEC 61131-3 projects. A complete IEC 61131-3 project implemented in an IEC 61131-3 environment can be transferred between different programming environments. It allows for the exchange of configuration elements, data types, and POUs written in: • the textual language, instruction list (IL), • the textual language, structured text (ST), • the graphical language, ladder diagram (LD), • the graphical language, function block diagram (FBD), and • sequential function chart (SFC). The exchange format is specified as a corresponding XML schema. The XML schema is an independent file with the .xsd extension and as such part of this specification. The specification of this schema is contained in Annex A. Annex B provides recommended schemata for extensions. An example XML document is given in Annex C. It is assumed that the reader of this document is familiar with XML technology.

  • Standard
    279 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 61511 provides an overview of the other three parts of IEC 61511.

  • Technical report
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-5-19:2019 defines the services provided to the FAL user at the boundary between the user and the application layer of the fieldbus reference model, and Systems Management at the boundary between the application layer and Systems Management of the fieldbus reference model. This standard specifies the structure and services of the IEC fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). This fourth edition cancels and replaces the third edition published in 2014 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: •improving the hotplug and redundancy features; •improving the phase switching and the error handling;•editorial improvements

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-5-10:2019 (E) defines the services provided to the FAL user at the boundary between the user and the application layer of the fieldbus reference model, and Systems Management at the boundary between the application layer and Systems Management of the fieldbus reference model. This standard specifies the structure and services of the IEC fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). This fourth edition cancels and replaces the third edition published in 2014 and constitutes a technical revision which includes the following significant technical changes with respect to the previous edition: – integration of system redundancy basic functionality; – integration of dynamic reconfiguration basic functionality; – integration of reporting system basic functionality; –-integration of asset management basic functionality; – integration of media redundancy ring interconnection basic functionality.

  • Standard
    634 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-5-4:2019 (E) defines the services provided to the FAL user at the boundary between the user and the application layer of the fieldbus reference model, and Systems Management at the boundary between the application layer and Systems Management of the fieldbus reference model. This standard specifies the structure and services of the IEC fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). This third edition cancels and replaces the second edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) additional user parameters to services; b) additional services to support distributed objects; c) additional secure services.

  • Standard
    224 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2019-05-02: IEC 61158-3 series circulated to vote as one document IEC 61158-3-X (65C/945/FDIS) & split at publication stage into: IEC 61158-3-2:2014/A1, IEC 61158-3-4, IEC 61158-3-12, IEC 61158-3-19, IEC 61158-3-21 & IEC 61158-3-25

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-3-12:2019 defines the services provided to the Type 12 fieldbus application layer at the boundary between the application and data-link layers of the fieldbus reference model and systems management at the boundary between the data-link layer and systems management of the fieldbus reference model. This fourth edition cancels and replaces the third edition published in 2014. It constitutes a technical revision. The main changes are: - Technical corrections in the communication services - Editorial improvements for clarification.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-4-21:2019 describes procedures for the timely transfer of data and control information from one data link user entity to a peer user entity, and among the data link entities forming the distributed data link service provider and procedures for giving communication opportunities based on standard ISO/IEC 8802-3 MAC, with provisions for nodes to be added or removed during normal operation; structure of the fieldbus data link protocol data units (DLPDUs) used for the transfer of data and control information by the protocol of this standard, and their representation as physical interface data units. This second edition cancels and replaces the first edition published in 2010. This edition constitutes a technical revision. The main changes are: •added Frame control Value, DLM function and DLL constants; •changed NCM_RETRY_RNMS to NCM_CHECK_NET_INTEGRITY_REQ; •updated DLM state table; •miscellaneous editorial corrections.

  • Standard
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-4-19:2019 specifies procedures for the timely transfer of data and control information from one data-link user entity to a peer user entity, and among the data-link entities forming the distributed data-link service provider and the structure of the fieldbus DLPDUs used for the transfer of data and control information by the protocol of this standard, and their representation as physical interface data units. This fourth edition cancels and replaces the third edition published in 2014 and constitutes a technical revision. The main changes are: •improving the hotplug and redundancy features; •improving the phase switching and the error handling; •editorial improvements

  • Standard
    480 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    480 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document addresses the setting and implementation of C&E matrices for a consistent
use in engineering activities. It aims to describe a simple format used to support a consistent
exchange of information between different engineering disciplines involved in project or
maintenance activities. The document defines the minimum requirements of the C&E matrix
content, which is derived from existing design documents, for example P&ID or verbal
descriptions.
The transfer of the relations defined in C&E matrices into a functional or source code for the
application programming of PLC/DCS is out of the scope of this document. In addition, this
document does not cover the implementation of complex and/or sequential logics at a
dedicated automation platform, which will require additional stipulations to be done/ followed.
It is understood, that C&E matrices in fact can be used to document the fault reactions of the
plant equipment and therefore can be used as reference point for the necessary safety
verifications to be applied.
C&E matrices as defined in this document do not have the same scope as Fishbone or
Ishikawa diagrams, which are often named in the literature as cause and effect diagrams.

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-5-23:2019 defines the services provided to the FAL user at the boundary between the user and the application layer of the fieldbus reference model, and Systems Management at the boundary between the application layer and Systems Management of the fieldbus reference model. This standard specifies the structure and services of the IEC fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:•addition of an attribute for Master ID (see 3.2.10, 6.4.3, 6.4.4 and 6.4.5)

  • Standard
    97 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-3-4:2019 defines the services provided to the Type 4 fieldbus application layer at the boundary between the application and data-link layers of the fieldbus reference model and systems management at the boundary between the data-link layer and systems management of the fieldbus reference model. This third edition cancels and replaces the second edition published in 2014. It constitutes a technical revision. The main changes are: -Additional user parameters to services; -Additional services to support distributed objects; -Additional secure services

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-3-25:2019 defines the services provided to the Type 25 fieldbus application layer at the boundary between the application and data-link layers of the fieldbus reference model and systems management at the boundary between the data-link layer and systems management of the fieldbus reference model. It provides common elements for basic time-critical messaging communications between devices in an automation environment.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-4-3:2019 specifies procedures for the timely transfer of data and control information from one data-link user entity to a peer user entity, and among the data-link entities forming the distributed data-link service provider and the structure of the fieldbus DLPDUs used for the transfer of data and control information by the protocol of this standard, and their representation as physical interface data units. This fourth edition cancels and replaces the third edition published in 2014 and constitutes a technical revision. The main changes are: This edition includes the following significant technical changes with respect to the previous edition: •corrections in Table 3; •corrections in Table A.15; •spelling and grammar.

  • Standard
    173 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-5-26:2019(E) specifies the structure and services of the IEC fieldbus Application Layer, in conformance with the OSI Basic Reference Model (see ISO/IEC 7498-1) and the OSI Application Layer Structure (see ISO/IEC 9545).FAL services and protocols are provided by FAL application-entities (AE) contained within the application processes. The FAL AE is composed of a set of object-oriented Application Service Elements (ASEs) and a Layer Management Entity (LME) that manages the AE. The ASEs provide communication services that operate on a set of related application process object (APO) classes. One of the FAL ASEs is a management ASE that provides a common set of services for the management of the instances of FAL classes.

  • Standard
    108 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-4-24:2019 specifies procedures for the timely transfer of data and control information from one data-link user entity to a peer user entity, and among the data-link entities forming the distributed data-link service provider and the structure of the fieldbus DLPDUs used for the transfer of data and control information by the protocol of this standard, and their representation as physical interface data units. This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision with the following technical changes: •patent declaration in the Introduction; •corrections on transmission sequence of fixed-width time slot type in 4.3.2; •technical extension for band sharing between I/O data exchange and message communication; •spelling and grammar

  • Standard
    125 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-4-4:2019 specifies procedures for the timely transfer of data and control information from one data-link user entity to a peer user entity, and among the data-link entities forming the distributed data-link service provider and the structure of the fieldbus DLPDUs used for the transfer of data and control information by the protocol of this standard, and their representation as physical interface data units. This third edition cancels and replaces the second edition published in 2014 and constitutes a technical revision. The main changes include the following significant technical changes with respect to the previous edition: a) additional user parameters to services; b) additional services to support distributed objects;c) additional secure services

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-5-21:2019 specifies the structure and services of the type 21 IEC fieldbus Application Layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498) and the OSI Application Layer Structure (ISO/IEC 9545). This second edition cancels and replaces the first edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: •added Write and Read service; •miscellaneous editorial corrections.

  • Standard
    83 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-5-12:2019 defines the services provided to the FAL user at the boundary between the user and the application layer of the fieldbus reference model, and Systems Management at the boundary between the application layer and Systems Management of the fieldbus reference model. This standard specifies the structure and services of the IEC fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). This fourth edition cancels and replaces the third edition published in 2014 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: •Technical corrections; and •Editorial improvements for clarification

  • Standard
    120 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-4-2:2019 specifies procedures for the timely transfer of data and control information from one data-link user entity to a peer user entity, and among the data-link entities forming the distributed data-link service provider and the structure of the fieldbus DLPDUs used for the transfer of data and control information by the protocol of this standard, and their representation as physical interface data units. This fourth edition cancels and replaces the third edition published in 2014 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: •clarifications of ControlNet object in 7.2; •extensions and clarifications of TCP/IP interface object in 7.5; •extensions and clarifications of Ethernet Link object in 7.6; •clarifications of DeviceNet object in 7.7; •extensions and clarifications of CCO object in 7.8; •extensions and clarifications of DLR object in 7.9; •extensions and clarifications of Port object in 7.11; •addition of PRP/HSR Protocol and PRP/HSR Nodes Table objects in 7.12 and 7.13; •extensions and clarifications of DLR protocol in Clause 10; •addition of PRP/HSR protocol mapping in Clause 11; •update of indicator behaviour in A.2.2 and A.2.4; •miscellaneous editorial corrections.

  • Standard
    385 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-5-4:2019 (E) defines the services provided to the FAL user at the boundary between the user and the application layer of the fieldbus reference model, and Systems Management at the boundary between the application layer and Systems Management of the fieldbus reference model. This standard specifies the structure and services of the IEC fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). This third edition cancels and replaces the second edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) additional user parameters to services; b) additional services to support distributed objects; c) additional secure services.

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-3-21:2019 defines in an abstract way the externally visible service provided by the Type 21 fieldbus data-link layer in terms of the primitive actions and events of the service; the parameters associated with each primitive action and event, and the form which they take and the interrelationship between these actions and events, and their valid sequences. It cancels and replaces the first edition published in 2010 and constitutes a technical revision. The main changes are listed below: •Added Network Control Message Type; •Miscellaneous editorial corrections.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-4-25:2019 specifies procedures for the timely transfer of data and control information from one data-link user entity to a peer user entity, and among the data-link entities forming the distributed data-link service provider, and the communication and interworking of sensors, effectors and other automation devices. By using this document together with other standards positioned within the OSI or fieldbus reference models, otherwise incompatible systems may work together in any combination

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-5-25:2019 specifies the structure and services of the IEC fieldbus Application Layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI ApplicationLayer Structure (ISO/IEC 9545).FAL services and protocols are provided by FAL application-entities (AE) contained within the application processes. The FAL AE is composed of a set of object-oriented Application Service Elements (ASEs) and a Layer Management Entity (LME) that manages the AE. The ASEs provide communication services that operate on a set of related application process object (APO) classes. One of the FAL ASEs is a management ASE that provides a common set of services for the management of the instances of FAL classes

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-4-12:2019 specifies procedures for the timely transfer of data and control information from one data-link user entity to a peer user entity, and among the data-link entities forming the distributed data-link service provider and the structure of the fieldbus DLPDUs used for the transfer of data and control information by the protocol of this standard, and their representation as physical interface data units. This fourth edition cancels and replaces the third edition published in 2014 and constitutes a technical revision. The main changes are: technical corrections and editorial improvements for clarification.

  • Standard
    145 pages
    English language
    sale 10% off
    e-Library read for
    1 day