Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method (ISO 16032:2004)

This European Standard specifies methods for measuring the sound pressure level from service equipment in buildings installed rigidly to building structures. This European Standard covers specifically measurements of sanitary installations, mechanical ventilation, heating and cooling service equipment, lifts, rubbish chutes, boilers, blowers, pumps and other auxiliary service equipment, and motor driven car park doors, but can also be applied to other equipment attached to or installed in buildings.
The methods are suitable for rooms with volumes of approximately 300 m3 or less in e.g. dwellings, hotels, schools, offices and hospitals. The standard is not in general intended for measurements in large auditoria and concert halls. However, the operating conditions and operating cycles in annex B can be used in such cases.
The service equipment sound pressure level is determined as the maximum A- weighted and optionally C- weighted sound pressure level occurring during a specified operation cycle of the service equipment under test, or as the equivalent continuous sound pressure level determined with a specified integration time. A-weighted and C- weighted values are calculated from octave-band measurements.

Akustik - Messung des Schalldruckpegels von haustechnischen Anlagen in Gebäuden - Standardverfahren (ISO 16032:2004)

Acoustique - Mesurage du niveau de pression acoustique des équipements techniques dans les bâtiments - Méthode d'expertise (ISO 16032:2004)

Akustika - Merjenje ravni zvočnega tlaka obratovalne opreme v stavbah – Inženirska metoda (ISO 16032:2004)

General Information

Status
Withdrawn
Publication Date
31-Jan-2005
Withdrawal Date
08-May-2024
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
08-May-2024
Due Date
31-May-2024
Completion Date
09-May-2024

Relations

Buy Standard

Standard
EN ISO 16032:2005
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 16032:2005
01-februar-2005
$NXVWLND0HUMHQMHUDYQL]YRþQHJDWODNDREUDWRYDOQHRSUHPHYVWDYEDK±
,QåHQLUVNDPHWRGD ,62
Acoustics - Measurement of sound pressure level from service equipment in buildings -
Engineering method (ISO 16032:2004)
Akustik - Messung des Schalldruckpegels von haustechnischen Anlagen in Gebäuden -
Standardverfahren (ISO 16032:2004)
Acoustique - Mesurage du niveau de pression acoustique des équipements techniques
dans les bâtiments - Méthode d'expertise (ISO 16032:2004)
Ta slovenski standard je istoveten z: EN ISO 16032:2004
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
91.120.20 $NXVWLNDYVWDYEDK=YRþQD Acoustics in building. Sound
L]RODFLMD insulation
SIST EN ISO 16032:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 16032:2005

---------------------- Page: 2 ----------------------

SIST EN ISO 16032:2005
EUROPEAN STANDARD
EN ISO 16032
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2004
ICS 17.140.20; 91.140.01

English version
Acoustics - Measurement of sound pressure level from service
equipment in buildings - Engineering method (ISO 16032:2004)
Acoustique - Mesurage du niveau de pression acoustique Akustik - Messung des Schalldruckpegels von
des équipements techniques dans les bâtiments - Méthode haustechnischen Anlagen in Gebäuden -
d'expertise (ISO 16032:2004) Standardverfahren (ISO 16032:2004)
This European Standard was approved by CEN on 16 January 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16032:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 16032:2005
EN ISO 16032:2004 (E)
Contents page
Foreword.3
Introduction .4
1 Scope.5
2 Normative references.5
3 Terms and definitions .5
4 Instrumentation.8
5 Test method – General .9
6 Measurement procedure.10
7 Measurement of reverberation time.12
8 Correction for background noise.12
9 Precision.13
10 Test report.13
Annex A (normative) A-weighting and C-weighting correction value.15
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.