Anaesthetic and respiratory equipment - Nebulizing systems and components (ISO 27427:2023)

This document specifies requirements for the safety and performance testing of general-purpose nebulizing systems intended for continuous or breath-actuated delivery of liquids, in aerosol form, to humans through the respiratory system.
This document includes gas-powered nebulizers (which can be powered by, e.g., compressors, pipeline systems, cylinders, etc.) and electrically powered nebulizers [e.g. spinning disc, ultrasonic, vibrating mesh (active and passive), and capillary devices] or manually powered nebulizers. This document does not specify the electrical requirements of electrically powered nebulizers.
This document does not specify the minimum performance of nebulizing systems.
This document does not apply to:
a)       devices intended for nasal deposition;
b)       devices intended solely to provide humidification or hydration by providing water in aerosol form.
NOTE 1        ISO 80601-2-74 and ISO 20789 cover these devices.
c)        drug-specific nebulizers or their components (e.g. metered dose inhalers, metered liquid inhalers, dry powder inhalers).
NOTE 2        ISO 20072 covers these devices.
NOTE 3        See Annex A for rationale.

Atemtherapiegeräte - Verneblersysteme und deren Bauteile (ISO 27427:2023)

*Dieses Dokument legt Anforderungen für die Prüfung der Sicherheit und Leistung von Mehrzweck-Verneblersystemen fest, die für die kontinuierliche oder atmungsaktivierte Ausgabe von Flüssigkeiten in Form von Aerosolen an Menschen durch das Atmungssystem vorgesehen sind.
Dieses Dokument schließt gasbetriebene Vernebler, die z. B. mit Kompressoren, Rohrleitungssystemen, Gasflaschen usw. betrieben werden können, und elektrisch betriebene Vernebler [z. B. Drehscheibe, Ultraschall, vibrierende Mesh-Vernebler (aktiv und passiv) und Kapillargeräte] oder von Hand betriebene Vernebler ein.
Dieses Dokument legt keine Mindestangaben für die Leistung von Verneblersystemen fest.
*Dieses Dokument gilt nicht für:
a) Geräte für die nasale Ablagerung vorgesehen sind;
b) Geräte, die ausschließlich für die Erzeugung von Feuchtigkeit oder für die Hydration durch Bereitstellung von Wasser in Form von Aerosolen vorgesehen sind.
ANMERKUNG Diese Geräte werden von ISO 80601-2-74 [3] und ISO 20789 [4] abgedeckt.
*Dieses Dokument gilt nicht für Vernebler für bestimmte Medikamente oder ihre Bauteile (z. B. Inhaliergeräte mit Dosierungen nach dem metrischen System, Flüssigkeits-Dosierinhaliergeräte, Trockenpulver-Inhaliergeräte).

Matériel d'anesthésie et de réanimation respiratoire - Systèmes de nébulisation et leurs composants (ISO 27427:2023)

Le présent document spécifie les exigences relatives à la sécurité, aux performances et aux essais des systèmes de nébulisation à usage général destinés à l’administration continue ou déclenchée par la respiration, sous forme d’un aérosol, de liquides aux personnes, via le système respiratoire.
Le présent document inclut les nébuliseurs pneumatiques qui peuvent être alimentés, par exemple par compresseurs, par réseau de gaz médicaux, par bouteilles, etc. ainsi que les nébuliseurs électriques [par exemple les dispositifs à disque rotatif, ultrasoniques, à tamis vibrant (actif et passif) et à capillaire] ou les nébuliseurs manuels. Le présent document ne spécifie pas les exigences électriques pour les nébuliseurs électriques.
Le présent document ne spécifie pas de performance minimale pour les systèmes de nébulisation.
Le présent document ne s’applique pas aux:
a)       dispositifs pour traitement nasal;
b)       dispositifs uniquement destinés à assurer une humidification ou une hydratation en fournissant de l’eau sous forme d’aérosol.
NOTE 1        L’ISO 80601-2-74 et l’ISO 20789 couvrent ces dispositifs.
c)        nébuliseurs spécifiques à des médicaments ou à leurs composants (par exemple aérosols doseurs, aérosols doseurs de liquide, inhalateurs à poudre sèche).
NOTE 2        L’ISO 20072 couvre ces dispositifs.
NOTE 3        Voir l’Annexe A pour les justifications.

Anestezijska in dihalna oprema - Razprševalni sistemi in sestavni deli (ISO 27427:2023)

Ta dokument določa zahteve glede varnosti in preskušanje učinkovitosti razprševalnih sistemov za splošno uporabo, ki so namenjeni stalnemu ali z vdihavanjem aktiviranemu dovajanju tekočin v aerosolni obliki prek dihalnega sistema.
Ta dokument vključuje nebulatorje s potisnim plinom, ki se lahko napajajo npr. prek kompresorjev, cevovodov, jeklenk itd., ter električne nebulatorje (npr. z vrtečim diskom, ultrazvočni, z vibrirajočo mrežico (aktivno ali pasivno) in kapilarne naprave) ali ročne nebulatorje. Ta dokument ne določa električnih zahtev za električne nebulatorje.
Ta dokument ne določa minimalne učinkovitosti razprševalnih sistemov.
Ta dokument se ne uporablja za:
a) pripomočke, namenjene za nosno odmerjanje;
b) pripomočke, ki so namenjeni izključno zagotavljanju vlaženja ali hidracije z zagotavljanjem vode v obliki aerosola.
OPOMBA 1: Te pripomočke obravnavata standarda ISO 80601-2-74 in ISO 20789.
c) nebulatorje za določena zdravila ali njihove sestavne dele (npr. inhalatorji z odmerjenimi odmerki, inhalatorji z odmerjenimi tekočinami, inhalatorji s suhim prahom).
OPOMBA 2: Te pripomočke obravnava standard ISO 20072.
OPOMBA 3: Za osnovno utemeljitev glej dodatek A.

General Information

Status
Published
Public Enquiry End Date
19-May-2021
Publication Date
13-Sep-2023
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
17-Aug-2023
Due Date
22-Oct-2023
Completion Date
14-Sep-2023

Relations

Buy Standard

Standard
EN ISO 27427:2023
English language
41 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 27427:2021
English language
46 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 27427:2023
01-oktober-2023
Nadomešča:
SIST EN ISO 27427:2019
Anestezijska in dihalna oprema - Razprševalni sistemi in sestavni deli (ISO
27427:2023)
Anaesthetic and respiratory equipment - Nebulizing systems and components (ISO
27427:2023)
Atemtherapiegeräte - Verneblersysteme und deren Bauteile (ISO 27427:2023)
Matériel d'anesthésie et de réanimation respiratoire - Systèmes de nébulisation et leurs
composants (ISO 27427:2023)
Ta slovenski standard je istoveten z: EN ISO 27427:2023
ICS:
11.040.10 Anestezijska, respiratorna in Anaesthetic, respiratory and
reanimacijska oprema reanimation equipment
SIST EN ISO 27427:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 27427:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 27427:2023


EN ISO 27427
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2023
EUROPÄISCHE NORM
ICS 11.040.10 Supersedes EN ISO 27427:2019
English Version

Anaesthetic and respiratory equipment - Nebulizing
systems and components (ISO 27427:2023)
Matériel d'anesthésie et de réanimation respiratoire - Atemtherapiegeräte - Verneblersysteme und deren
Systèmes de nébulisation et leurs composants (ISO Bauteile (ISO 27427:2023)
27427:2023)
This European Standard was approved by CEN on 3 March 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 27427:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 27427:2023
EN ISO 27427:2023 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 27427:2023
EN ISO 27427:2023 (E)
European foreword
This document (EN ISO 27427:2023) has been prepared by Technical Committee ISO/TC 121
"Anaesthetic and respiratory equipment" in collaboration with Technical Committee CEN/TC 215
“Respiratory and anaesthetic equipment” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2024, and conflicting national standards shall
be withdrawn at the latest by January 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 27427:2019.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 27427:2023 has been approved by CEN as EN ISO 27427:2023 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 27427:2023

---------------------- Page: 6 ------
...

SLOVENSKI STANDARD
oSIST prEN ISO 27427:2021
01-maj-2021
Anestezijska in dihalna oprema - Razprševalni sistemi in sestavni deli (ISO/DIS
27427:2021)
Anaesthetic and respiratory equipment - Nebulizing systems and components (ISO/DIS
27427:2021)
Atemtherapiegeräte - Verneblersysteme und deren Bauteile (ISO/DIS 27427:2021)
Matériel d'anesthésie et de réanimation respiratoire - Systèmes de nébulisation et ses
composants (ISO/DIS 27427:2021)
Ta slovenski standard je istoveten z: prEN ISO 27427
ICS:
11.040.10 Anestezijska, respiratorna in Anaesthetic, respiratory and
reanimacijska oprema reanimation equipment
oSIST prEN ISO 27427:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 27427:2021

---------------------- Page: 2 ----------------------
oSIST prEN ISO 27427:2021
DRAFT INTERNATIONAL STANDARD
ISO/DIS 27427
ISO/TC 121/SC 2 Secretariat: ANSI
Voting begins on: Voting terminates on:
2021-03-19 2021-06-11
Anaesthetic and respiratory equipment — Nebulizing
systems and components
ICS: 11.040.10
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 27427:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2021

---------------------- Page: 3 ----------------------
oSIST prEN ISO 27427:2021
ISO/DIS 27427:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 27427:2021
ISO/DIS 27427:2021(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 3
4 General requirements and requirements for test . 5
4.1 General . 5
4.2 Test methods and alternatives . 5
4.2.1 Test methods for aerosol output, aerosol output rate, and particle sizing . 5
4.2.2 *Alternative test methods . 5
4.2.3 Calibration and setup .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.