Fibre optic interconnecting devices and passive components - Performance standard - Part 071-02: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments (IEC 61753-071-02:2020)

This part of IEC 61753 contains the minimum initial test and measurement requirements and
severities which non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches
need to satisfy in order to be categorized as meeting the requirements of category C – controlled
environments, as defined in Annex A of IEC 61753-1:2018.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 071-2: Nicht mit Steckverbindern versehene räumliche 1 x 2 und 2 x 2 Einmodenschalter für die Kategorie C - Kontrollierte Umgebung (IEC 61753-071-02:2020)

Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance - Partie 071-02: Commutateurs spatiaux optiques unimodaux 1 x 2 et 2 x 2 non connectorisés pour la catégorie C - Environnements contrôlés (IEC 61753-071-02:2020)

IEC 61753-071-02:2020 contient les sévérités et les exigences initiales minimales d'essai et de mesure que les commutateurs spatiaux optiques unimodaux 1 × 2 et 2 × 2 non connectorisés doivent satisfaire afin d'être classés comme conformes aux exigences de la catégorie C – environnements contrôlés, comme cela est défini à l’Annexe A de l'IEC 61753‑1:2018. Cette première édition annule et remplace l'IEC/PAS 61753-071-2 parue en 2014 dont elle constitue une révision technique. La présente édition inclut les modifications techniques majeures suivantes par rapport à l'IEC 61753-071-2:2014:
a) ajout d'exigences de performance sur la répétabilité et la durabilité des commutations;
b) suppression des exigences de performance sur la directivité;
c) suppression de l'essai de choc en fonctionnement;
d) modification des exigences de performance sur le temps de commutation;
e) modification des conditions d'essai de puissance optique élevée;
f) harmonisation des conditions d'essai avec celles de l'IEC 61753-1:2018.

Optični spojni elementi in pasivne komponente - Tehnični standard - 071-2. del: Prostorska stikala brez konektorjev, 1 × 2 in 2 × 2, za enorodovna optična vlakna za kategorijo C - Nadzorovana okolja (IEC 61753-071-02:2020)

General Information

Status
Published
Publication Date
16-Nov-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
13-Nov-2020
Due Date
18-Jan-2021
Completion Date
17-Nov-2020

Relations

Buy Standard

Standard
EN IEC 61753-071-2:2021
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61753-071-2:2021
01-januar-2021
Nadomešča:
SIST EN 61753-071-2:2014
Optični spojni elementi in pasivne komponente - Tehnični standard - 071-2. del:
Prostorska stikala brez konektorjev, 1 × 2 in 2 × 2, za enorodovna optična vlakna
za kategorijo C - Nadzorovana okolja (IEC 61753-071-02:2020)
Fibre optic interconnecting devices and passive components - Performance standard -
Part 071-02: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches
for category C - Controlled environments (IEC 61753-071-02:2020)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
071-2: Nicht mit Steckverbindern versehene räumliche 1 x 2 und 2 x 2 Einmodenschalter
für die Kategorie C - Kontrollierte Umgebung (IEC 61753-071-02:2020)
Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance -
Partie 071-02: Commutateurs spatiaux optiques unimodaux 1 x 2 et 2 x 2 non
connectorisés pour la catégorie C - Environnements contrôlés (IEC 61753-071-02:2020)
Ta slovenski standard je istoveten z: EN IEC 61753-071-02:2020
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 61753-071-2:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61753-071-2:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 61753-071-2:2021


EUROPEAN STANDARD EN IEC 61753-071-02

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2020
ICS 33.180.20 Supersedes EN 61753-071-2:2014 and all of its
amendments and corrigenda (if any)
English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 071-02: Non-connectorized single-
mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C -
Controlled environments
(IEC 61753-071-02:2020)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Norme de performance - Partie 071-02: Bauteile - Betriebsverhalten - Teil 071-2: Nicht mit
Commutateurs spatiaux optiques unimodaux 1 x 2 et 2 x 2 Steckverbindern versehene räumliche 1 x 2 und 2 x 2
non connectorisés pour la catégorie C - Environnements Einmodenschalter für die Kategorie C - Kontrollierte
contrôlés Umgebung
(IEC 61753-071-02:2020) (IEC 61753-071-02:2020)
This European Standard was approved by CENELEC on 2020-10-27. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61753-071-02:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61753-071-2:2021
EN IEC 61753-071-02:2020 (E)
European foreword
The text of document 86B/4324/FDIS, future edition 1 of IEC 61753-071-02, prepared by SC 86B
"Fibre optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61753-071-
02:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-07-27
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-10-27
document have to be withdrawn
This document supersedes EN 61753-071-2:2014 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61753-071-02:2020 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61300-3-3 NOTE Harmonized as EN 61300-3-3
IEC 61300-3-4 NOTE Harmonized as EN 61300-3-4
IEC 61753-071-2:2014 NOTE Harmonized as EN 61753-071-2:2014 (not modified)
IEC 61753-1:2018 NOTE Harmonized as EN IEC 61753-1:2018 (not modified)
IEC 62343-1 NOTE Harmonized as EN IEC 62343-1
2

---------------------- Page: 4 ----------------------
SIST EN IEC 61753-071-2:2021
EN IEC 61753-071-02:2020 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-27 2008 Environmental testing - Part 2-27: Tests - EN 60068-2-27 2009
Test Ea and guidance: Shock
IEC 60793-2-50 - Optical fibres - Part 2-50: Product EN IEC 60793-2-50 -
specifications - Sectional specification for
class B single-mode fibres
IEC 60794-2-50 - Optical fibre cables - Part 2-50: Indoor EN IEC 60794-2-50 -
optical fibre cables - Family specification
for simplex and duplex cables for use in
terminated cable assemblies
IEC 60876-1 - Fibre optic interconnecting devices and EN 60876-1 -
passive components - Fibre optic spatial
switches - Part 1: Generic specification
IEC 61300 series Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures - Part 1: General
and guidance
IEC 61300-2-1 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures - Part 2-1: Tests
- Vibration (sinusoidal)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN IEC 61300-2-4 -
passive components - Basic test and
measurement procedures - Part 2-4: Tests
- Fibre or cable retention
IEC 61300-2-5 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures - Part 2-5: Tests
- Torsion
3

---------------------- Page: 5 ----------------------
SIST EN IEC 61753-071-2:2021
EN IEC 61753-071-02:2020 (E)
Publication Year Title EN/HD Year
IEC 61300-2-9 - EN 61300-2-9 -
Fibre optic interconnecting devices and
passive components - Basic test and
measurement procedures - Part 2-9: Tests
- Shock
IEC 61300-2-14 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures - Part 2-14:
Tests - High optical power
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures - Part 2-17:
Tests - Cold
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 -
passive components - Basic test and
measurement procedures - Part 2-18:
Tests - Dry heat - High temperature
endurance
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures - Part 2-19:
Tests - Damp heat (steady state)
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures - Part 2-22:
Tests - Change of temperature
IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures - Part 2-42:
Tests - Static side load for strain relief
IEC 61300-2-44 - Fibre optic interconnecting devices and EN 61300-2-44 -
passive components - Basic test and
measurement procedures - Part 2-44:
Tests - Flexing of the strain relief of fibre
optic devices
IEC 61300-3-2 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures -- Part 3-2:
Examinations and measurements -
Polarization dependence of a single-mode
fibre optic device
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures - Part 3-6:
Examinations and measurements - Return
loss
4

---------------------- Page: 6 ----------------------
SIST EN IEC 61753-071-2:2021
EN IEC 61753-071-02:2020 (E)
Publication Year Title EN/HD Year
IEC 61300-3-7 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures - Part 3-7:
Examinations and measurements -
Wavelength dependence of attenuation
and return loss of single mode components
IEC 61300-3-21 - Fibre optic interconnecting devices and EN IEC 61300-3-21 -
passive components - Basic test and
measurement procedures - Part 3-21:
Examinations and measurements -
Switching time
IEC 61300-3-28 - Fibre optic interconnecting devices and EN 61300-3-28 -
passive components - Basic test and
measurement procedures - Part 3-28:
Examinations and measurements -
Transient loss
IEC 61300-3-50 - Fibre optic interconnecting devices and EN 61300-3-50 -
passive components - Basic test and
measurement procedures - Part 3-50:
Examinations and measurements -
Crosstalk for optical spatial switches
IEC/TS 62627-09 - Fibre optic interconnecting devices and - -
passive components - Vocabulary for
passive optical devices

5

---------------------- Page: 7 ----------------------
SIST EN IEC 61753-071-2:2021

---------------------- Page: 8 ----------------------
SIST EN IEC 61753-071-2:2021



IEC 61753-071-02

®


Edition 1.0 2020-09




INTERNATIONAL



STANDARD




NORME


INTERNATIONALE











Fibre optic interconnecting devices and passive components –

Performance standard –

Part 071-02: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial

switches for category C – Controlled environments



Dispositifs d’interconnexion et composants passifs fibroniques –


Norme de performance –

Partie 071-02: Commutateurs spatiaux optiques unimodaux 1 × 2 et 2 × 2

non connectorisés pour la catégorie C – Environnements contrôlés











INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 33.180.20 ISBN 978-2-8322-8853-5




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 9 ----------------------
SIST EN IEC 61753-071-2:2021
– 2 – IEC 61753-071-02:2020 © IEC 2020
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Test conditions . 8
5 Test report . 8
6 Performance requirements. 9
6.1 Dimensions . 9
6.2 Sample size . 9
6.3 Test details and requirements . 9
Annex A (normative) Sample size . 13
Bibliography . 14

Figure 1 – Configuration of 1 × 2 spatial switch . 7
Figure 2 – Configuration of 2 × 2 spatial switch, non-crossover type . 7
Figure 3 – Configuration of 2 × 2 spatial switch, crossover type . 8

Table 1 – Single-mode spectral bands . 8
Table 2 – Test details and requirements for category C . 9
Table A.1 – Number of samples for each test . 13

---------------------- Page: 10 ----------------------
SIST EN IEC 61753-071-2:2021
IEC 61753-071-02:2020 © IEC 2020 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –

Part 071-02: Non-connectorized single-mode fibre optic 1 × 2 and
2 × 2 spatial switches for category C – Controlled environments

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61753-071-02 has been prepared by subcommittee SC 86B: Fibre
optic interconnecting devices and passive components, of IEC technical committee TC 86: Fibre
optics.
This first edition cancels and replaces IEC 61753-071-2 published in 2014. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to
IEC 61753-071-2:2014.
a) addition of performance requirements of repeatability and switching durability;
b) deleting of performance requirements of directivity;
c) deleting of test of operational shock;
d) change of performance requirements of switching time;

---------------------- Page: 11 ----------------------
SIST EN IEC 61753-071-2:2021
– 4 – IEC 61753-071-02:2020 © IEC 2020
e) change of test condition of high optical power;
f) harmonization of the test conditions with IEC 61753-1:2018.
The text of this International Standard is based on the following documents:
FDIS Report on voting
86B/4324/FDIS 86B/4334/RVD

Full information on the voting for the approval of this International Standard can be found in the
report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 61753 series, published under
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.