SIST EN 61753-071-2:2014
(Main)Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorised single-mode fibre optic 1 x 2 and 2 x 2 spatial switches for category C - Controlled environments
Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorised single-mode fibre optic 1 x 2 and 2 x 2 spatial switches for category C - Controlled environments
EN IEC 61753-071-2 contains the minimum initial test and measurement requirements and severities which non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches need to satisfy in order to be categorized as meeting the requirements of category C - Controlled environments, as defined in Annex A of IEC 61753-1:2007.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 071-2: Nicht mit Steckverbindern versehene räumliche 1 x 2 und 2 x 2 Einmodenschalter für die Kategorie C - Kontrollierte Umgebung
Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 071-2: Commutateurs spatiaux optiques unimodaux 1 × 2 et 2 × 2 non connectorisés pour la catégorie C - Environnements contrôlés
L'IEC 61753-071-2:2014 contient les sévérités et les exigences initiales minimales d'essai et de mesure que les commutateurs spatiaux optiques unimodaux 1 x 2 et 2 x 2 non connectorisés doivent satisfaire afin d'être classés comme conformes aux exigences de la catégorie C environnements contrôlés, comme spécifiée dans l'Annexe A de l'IEC 61753-1:2007.
Mots clés: commutateurs spatiaux optiques unimodaux 1 x 2 et 2 x 2 non connectorisés, catégorie C environnements contrôlés,
Optični spojni elementi in pasivne komponente - Tehnični standard - 071-2. del: Prostorska stikala brez konektorjev, 1 x 2 in 2 x 2, za enorodna optična vlakna za kategorijo C - Nadzorovana okolja (IEC 61753-071-2:2014)
Standard EN IEC 61753-071-2 zajema najmanjše začetne zahteve in stopnje zahtevnosti za preskuse in meritve, ki jih morajo prostorska stikala brez konektorjev, 1 x 2 in 2 x 2, za enorodna optična vlakna izpolnjevati, da izpolnjujejo zahteve kategorije C – nadzorovano okolje, kakor je določeno v Dodatku A standarda IEC 61753-1:2007.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorised single-mode fibre optic 1 x 2 and 2 x 2 spatial switches for category C - Controlled environments33.180.20Fibre optic interconnecting devicesICS:Ta slovenski standard je istoveten z:EN 61753-071-2:2014SIST EN 61753-071-2:2014en01-november-2014SIST EN 61753-071-2:2014SLOVENSKI
STANDARD
SIST EN 61753-071-2:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 61753-071-2
July 2014 ICS 33.180.20
English Version
Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments (IEC 61753-071-2:2014)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 071-2: Commutateurs spatiaux optiques unimodaux 1 × 2 et 2 × 2 non connectorisés pour la catégorie C - Environnements contrôlés (CEI 61753-071-2:2014)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 071-2: Nicht mit Steckverbindern versehene räumliche 1 x 2 und 2 x 2 Einmodenschalter für die Kategorie C - Kontrollierte Umgebung (IEC 61753-071-2:2014) This European Standard was approved by CENELEC on 2014-06-17. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61753-071-2:2014 E SIST EN 61753-071-2:2014
EN 61753-071-2:2014 - 2 -
Foreword The text of document 86B/3748/FDIS, future edition 1 of IEC 61753-071-2, prepared by SC 86B "Fibre optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-071-2:2014. The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-03-17 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2017-06-17
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61753-071-2:2014 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61300-3-3 NOTE Harmonised as EN 61300-3-3. IEC 61300-3-4 NOTE Harmonised as EN 61300-3-4. IEC 61300-3-6 NOTE Harmonised as EN 61300-3-6. IEC 62343-2 NOTE Harmonised as EN 62343-2. SIST EN 61753-071-2:2014
- 3 - EN 61753-071-2:2014
Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60876-1 -
Fibre optic in
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.