Gas mixers for medical use — Stand-alone gas mixers

ISO 11195:2018 specifies requirements for the performance and safety of stand-alone gas mixers intended for mixing oxygen with another gas for medical use. ISO 11195:2018 does not apply to: a) blocks of flowmeters with separate controls for the flow of each gas; b) stand-alone gas mixers which mix oxygen with ambient air; c) stand-alone gas mixers with more than two different gas inlets; d) stand-alone gas mixers connected to an oxygen concentrator.

Mélangeurs de gaz à usage médical — Mélangeurs de gaz indépendants

General Information

Status
Published
Publication Date
24-Jan-2018
Current Stage
9093 - International Standard confirmed
Completion Date
26-Apr-2024
Ref Project

Relations

Buy Standard

Standard
ISO 11195:2018 - Gas mixers for medical use -- Stand-alone gas mixers
English language
19 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 11195
Second edition
2018-01
Gas mixers for medical use — Stand-
alone gas mixers
Mélangeurs de gaz à usage médical — Mélangeurs de gaz
indépendants
Reference number
ISO 11195:2018(E)
©
ISO 2018

---------------------- Page: 1 ----------------------
ISO 11195:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 11195:2018(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 *Requirements for essential performance . 3
5 General requirements . 3
5.1 Risk management . 3
5.2 Usability . 3
6 Materials . 3
6.1 Biocompatibility . 3
6.2 Phthalates . 4
6.3 Natural rubber (latex) . 4
6.4 Effects of cleaning, disinfecting or sterilizing agents . 4
6.5 Gas compatibility . 4
6.6 Cleanliness . 5
6.7 Lubricants . 5
7 Normal operating conditions . 5
8 Requirements for gas supply inlet pressure . 5
9 Reverse gas flow .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.