Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems

ISO 13577-2:2014 specifies the safety requirements for combustion and fuel handling systems that are part of industrial furnaces and associated processing equipment (TPE). It deals with significant hazards, hazardous situations and events relevant to combustion and fuel handling systems, when used as intended and under the conditions foreseen by the manufacturer. ISO 13577-2:2014 covers: fuel pipework downstream of and including the manual isolating valve; combustion air supply (including oxygen and oxygen enriched combustion air) and flue gas system; burner(s), burner system and ignition device; functional requirements for safety related control system. It applies to any oxidation with air or other gases containing free oxygen of gaseous and liquid fuels or any combustion of them to release thermal energy in TPE. For thermal or catalytic post combustion and waste incineration, ISO 13577-2:2014 applies only to auxiliary burners designed to start-up and/or support the process. ISO 13577-2:2014 also gives the necessary requirements regarding information for use.

Fours industriels et équipements associés — Sécurité — Partie 2: Équipement de combustion et de manutention des combustibles

General Information

Status
Withdrawn
Publication Date
07-Sep-2014
Current Stage
9599 - Withdrawal of International Standard
Completion Date
15-Dec-2023
Ref Project

Relations

Buy Standard

Standard
ISO 13577-2:2014 - Industrial furnaces and associated processing equipment -- Safety
English language
95 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 13577-2:2014 - Industrial furnaces and associated processing equipment -- Safety
English language
95 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

DRAFT INTERNATIONAL STANDARD ISO/DIS 13577-2
ISO/TC 244 Secretariat: JISC
Voting begins on Voting terminates on

2013-02-23 2013-05-23
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION  •  МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ  •  ORGANISATION INTERNATIONALE DE NORMALISATION


Industrial furnaces and associated processing equipment —
Safety —
Part 2:
Combustion and fuel handling systems
Fours industriels et équipements de processus associés — Sécurité —
Partie 2: Combustion et manutention des combustibles
ICS 13.100; 25.180.01










To expedite distribution, this document is circulated as received from the committee
secretariat. ISO Central Secretariat work of editing and text composition will be undertaken at
publication stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.



THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©  International Organization for Standardization, 2013

---------------------- Page: 1 ----------------------
ISO/DIS 13577-2

Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user’s country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic,
photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.

ii © ISO 2013 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/DIS 13577-2

Contents Page
Foreword .v
Introduction.vi
1 Scope.7
2 Normative references.8
3 Terms and definitions .9
4 Safety Requirements, Measures and Verification Means.9
4.1 General .9
4.2 Gaseous fuels .10
4.2.1 Gas pipework .10
4.2.2 Required safety devices .13
4.2.3 Combustion air and air/fuel ratio .16
4.2.4 Supply of pre-mixed fuel gas/air.17
4.2.5 Burners.18
4.2.6 Automatic burner control systems.19
4.2.7 Start-up of the heating system and burner ignition.
...

INTERNATIONAL ISO
STANDARD 13577-2
First edition
2014-09-15
Industrial furnaces and associated
processing equipment — Safety —
Part 2:
Combustion and fuel handling systems
Fours industriels et équipements associés — Sécurité —
Partie 2: Équipement de combustion et de manutention des
combustibles
Reference number
ISO 13577-2:2014(E)
©
ISO 2014

---------------------- Page: 1 ----------------------
ISO 13577-2:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 13577-2:2014(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 3
4 Safety requirements, measures and verification means . 3
4.1 General . 3
4.2 Gaseous fuels . 3
4.3 Liquid fuels .18
4.4 Multiple fuels .29
4.5 Oxygen or oxygen-enriched combustion air (OOECA) .30
5 Verification of the safety requirements and/or measures .32
6 Information for Use .37
6.1 General .37
6.2 Marking .37
6.3 Instruction handbook .37
Annex A (informative) List of significant hazards.40
Annex B (informative) Typical examples of fuels .42
Annex C (informative) Typical example of piping and components .43
Annex D (informative) Methods for burner start-up .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.