Combined coatings on aluminium — General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium

ISO 28340:2013 gives specifications for the combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium used for architecture. It specifies the characteristic properties of combined coatings on aluminium, outlines the test methods for checking these characteristic properties and specifies their required performance.

Revêtements combinés sur aluminium — Spécifications générales pour les revêtements combinés appliqués sur l'aluminium composés d'un revêtement organique obtenu par électrophorèse appliqué sur un revêtement obtenu par anodisation

General Information

Status
Published
Publication Date
20-Feb-2013
Current Stage
9093 - International Standard confirmed
Completion Date
13-May-2024
Ref Project

Buy Standard

Standard
ISO 28340:2013 - Combined coatings on aluminium -- General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium
English language
17 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 28340
First edition
2013-02-15
Combined coatings on aluminium —
General specifications for combined
coatings of electrophoretic organic
coatings and anodic oxidation
coatings on aluminium
Revêtements combinés sur aluminium — Spécifications générales
pour les revêtements combinés appliqués sur l’aluminium composés
d’un revêtement organique obtenu par électrophorèse appliqué sur
un revêtement obtenu par anodisation
Reference number
ISO 28340:2013(E)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 28340:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 28340:2013(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Classes . 2
5 Quality . 3
5.1 General . 3
5.2 Appearance . 3
5.3 Colour . 3
5.4 Gloss . 3
5.5 Thickness of anodic oxidation coating . 3
5.6 Corrosion resistance . 3
5.7 Resistance to accelerated weathering . . 4
5.8 Resistance to cyclic corrosion/UV light . 4
5.9 Outdoor exposure . 4
5.10 Hardness of the organic coating . 4
5.11 Adhesion of the organic coating . 4
5.12 Solvent resistance of the organic coating . 4
5.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.