ISO/ASTM 52927:2024
(Main)Additive manufacturing — General principles — Main characteristics and corresponding test methods
Additive manufacturing — General principles — Main characteristics and corresponding test methods
This document specifies the principal requirements applied to the testing of parts produced by additive manufacturing processes. This document — identifies quality characteristics for feedstock and parts and the corresponding test procedures, — provides the specific procedures to build specimens using additive manufacturing process, and — recommends the scope and content of test and supply agreements. This document is aimed at machine manufacturers, feedstock suppliers, AM system users, part providers, and customers to facilitate the communication on main quality characteristics. It applies wherever additive manufacturing processes are used. NOTE It is the intent to include, in future versions of this document, other characteristics such as thermal properties, electrical requirements and physical and physico-chemical properties based upon material types.
Fabrication additive — Principes généraux — Principales caractéristiques et méthodes d'essai correspondantes
Le présent document spécifie les principales exigences appliquées aux essais des pièces produites par des procédés de fabrication additive. Le présent document — identifie des caractéristiques de qualité des matière premières et des pièces, ainsi que les modes opératoires d’essai correspondants, — fournit les procédures spécifiques pour fabriquer des éprouvettes en utilisant des procédés de fabrication additive, et — recommande le domaine d’application et le contenu de l’essai et des accords d'approvisionnement. Le présent document est destiné aux fabricants de machines, aux fournisseurs de matière première, aux utilisateurs de systèmes de FA, aux fournisseurs de pièces et aux clients pour faciliter la communication sur les principales caractéristiques de qualité. Il s’applique dès lors que des procédés de fabrication additive sont utilisés. NOTE Il est prévu d'inclure d'autres caractéristiques, dans les futures versions du présent document, telles que les propriétés thermiques, les exigences électriques ainsi que les propriétés physiques et physico-chimiques selon le type de matériau.
General Information
Relations
Buy Standard
Standards Content (Sample)
International
Standard
ISO/ASTM 52927
First edition
Additive manufacturing — General
2024-03
principles — Main characteristics
and corresponding test methods
Fabrication additive — Principes généraux — Principales
caractéristiques et méthodes d'essai correspondantes
Reference number
ISO/ASTM 52927:2024(en) © ISO/ASTM International 2024
---------------------- Page: 1 ----------------------
ISO/ASTM 52927:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO/ASTM International 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester. In the United States, such requests should be sent to ASTM International.
ISO copyright office ASTM International
CP 401 • Ch. de Blandonnet 8 100 Barr Harbor Drive, PO Box C700
CH-1214 Vernier, Geneva West Conshohocken, PA 19428-2959, USA
Phone: +41 22 749 01 11 Phone: +610 832 9634
Fax: +610 832 9635
Email: copyright@iso.org Email: khooper@astm.org
Website: www.iso.org Website: www.astm.org
Published in Switzerland
© ISO/ASTM International 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO/ASTM 52927:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Main characteristics and corresponding test methods . 2
4.1 General .2
4.2 Selection criteria .2
5 Part and process testing — Specifications and quality criteria . 3
5.1 General .3
5.2 Testing the feedstocks .3
5.3 Monitoring the process .3
5.4 Testing the part .3
Annex A (normative) Test methods for metallic materials . 4
Annex B (normative) Test methods for polymer materials .10
Annex C (normative) Test methods for ceramic materials . 14
Bibliography .
...
Norme
internationale
ISO/ASTM 52927
Première édition
Fabrication additive — Principes
2024-03
généraux — Principales
caractéristiques et méthodes
d'essai correspondantes
Additive manufacturing — General principles — Main
characteristics and corresponding test methods
Numéro de référence
ISO/ASTM 52927:2024(fr) © ISO/ASTM International 2024
---------------------- Page: 1 ----------------------
ISO/ASTM 52927:2024(fr)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO/ASTM International 2024
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou un intranet, sans autorisation écrite soit de l’ISO à l’adresse ci-après,
soit d’un organisme membre de l’ISO dans le pays du demandeur. Aux États-Unis, les demandes doivent être adressées à ASTM
International.
ISO copyright office ASTM International
Case postale 401 • Ch. de Blandonnet 8 100 Barr Harbor Drive, PO Box C700
CH-1214 Vernier, Genève West Conshohocken, PA 19428-2959, USA
Tél.: +41 22 749 01 11 Tél.: +610 832 9634
Fax: +610 832 9635
E-mail: copyright@iso.org E-mail: khooper@astm.org
Web: www.iso.org Web: www.astm.org
Publié en Suisse
© ISO/ASTM International 2024 – Tous droits réservés
ii
---------------------- Page: 2 ----------------------
ISO/ASTM 52927:2024(fr)
Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Principales caractéristiques et méthodes d’essai correspondantes . 2
4.1 Généralités .2
4.2 Critères de sélection .3
5 Essais sur la pièce et le procédé — Spécifications et critères de qualité . 3
5.1 Généralités .3
5.2 Essais sur les matières premières .3
5.3 Suivi du procédé .3
5.4 Essais sur la pièce .4
Annexe A (normative) Méthodes d’essai pour matériaux métalliques . 5
Annexe B (normative) Méthodes d’essai pour matériaux polymères .11
Annexe C (normative) Méthodes d’essai pour matériaux céramiques .15
Bibliographie . 19
© ISO/ASTM International 2024 – Tous droits réservés
...
FINAL DRAFT
International
Standard
ISO/ASTM
FDIS
52927
ISO/TC 261
Additive manufacturing — General
Secretariat: DIN
principles — Main characteristics
Voting begins on:
and corresponding test methods
2024-01-02
Fabrication additive — Principes généraux — Principales
Voting terminates on:
caractéristiques et méthodes d'essai correspondantes
2024-02-27
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
ISO/CEN PARALLEL PROCESSING LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/ASTM FDIS 52927:2024(en) © ISO/ASTM International 2024
---------------------- Page: 1 ----------------------
FINAL DRAFT
ISO/ASTM FDIS 52927:2024(en)
International
Standard
ISO/ASTM
FDIS
52927
ISO/TC 261
Additive manufacturing — General
Secretariat: DIN
principles — Main characteristics
Voting begins on:
and corresponding test methods
Fabrication additive — Principes généraux — Principales
Voting terminates on:
caractéristiques et méthodes d'essai correspondantes
COPYRIGHT PROTECTED DOCUMENT
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
© ISO/ASTM International 2024
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
IN ADDITION TO THEIR EVALUATION AS
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
ISO/CEN PARALLEL PROCESSING
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
or ISO’s member body in the country of the requester. In the United States, such requests should be sent to ASTM International.
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
ISO copyright office ASTM International TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
CP 401 • Ch. de Blandonnet 8 100 Barr Harbor Drive, PO Box C700
CH-1214 Vernier, Geneva West Conshohocken, PA 19428-2959, USA
Phone: +41 22 749 01 11 Phone: +610 832 9634
Fax: +610 832 9635
Email: copyright@iso.org Email: khooper@astm.org
Website: www.iso.org Website: www.astm.org
Published in Switzerland Reference number
ISO/ASTM FDIS 52927:2023(en) © ISO/ASTM International 2023
© ISO/ASTM International 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO/ASTM FDIS 52927:2023(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Main characteristics and corresponding test methods . 2
4.1 General .2
4.2 Selection criteria .2
5 Part and process testing — Specifications and quality criteria . 3
...
Style Definition
...
Style Definition
...
2023-12-05 Style Definition
...
Style Definition
...
ISO/ASTM FDIS 52927:2023(E)
Style Definition
...
Style Definition
ISO/TC 261 & ASTM F 42
...
Style Definition
...
Secretariat: DIN
Style Definition
...
Date: 2023-xx
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Additive manufacturing — General principles — Main
Style Definition
...
characteristics and corresponding test methods
Style Definition
...
Style Definition
Fabrication additive — Principes généraux — Principales caractéristiques et méthodes d'essai
...
correspondantes
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
FDIS stage
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
---------------------- Page: 1 ----------------------
ISO/ASTM FDIS 52927:2023(E)
Formatted: Font: Bold
Formatted: Font: Bold
Formatted: HeaderCentered, Line spacing: single
© ISO/ASTM 2023
Formatted: Header distance from edge: 1.27 cm, Footer
distance from edge: 0.5 cm
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
Commented [eXtyles1]: Not found: "ISO/ASTM 2023"
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
Formatted: Default Paragraph Font
be requested from either ISO at the address below or ISO’s member body in the country of the requester. In the
Formatted: Default Paragraph Font
United States, such requests should be sent to ASTM International.
Formatted: Indent: Left: 0 cm, Right: 0 cm, Space
ISO copyright office ASTM International
Before: 0 pt, Adjust space between Latin and Asian text,
CP 401 • Ch. de Blandonnet 8 100 Barr Harbor Drive, PO Box C700
Adjust space between Asian text and numbers
CH-1214 Vernier, Geneva West Conshohocken, PA 19428-2959, USA
Phone: + 41 22 749 01 11 Phone: +610 832 9634
Fax: +41 22 749 09 47 Fax: +610 832 9635
Email: copyright@iso.org Email: khooper@astm.org
Website: www.iso.org Website: www.astm.org
Commented [eXtyles2]: The URL http://www.astm.org
has been redirected to https://www.astm.org/. Please verify
the URL.
E-mail: copyright@iso.org
Website: www.iso.org
Published in Switzerland
Formatted: Font: 11 pt
Formatted: FooterPageRomanNumber, Line spacing:
single
ii © ISO/ASTM International 2023 – All rights reserved
© ISO/ASTM 2023 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO/ASTM FDIS 52927:2023 (E)
Formatted: Font: Bold
Formatted: Font: Bold
Formatted: Font: Bold
Contents
Formatted: HeaderCentered, Left, Line spacing: single
Foreword .vi Formatted: Adjust space between Latin and Asian text,
Adjust space between Asian text and numbers
Introduction. viii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Main characteristics and corresponding test methods . 2
4.1 General . 2
4.2 Selection criteria . 3
5 Part and proc
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.