Short-circuit currents in three-phase a.c. systems - Part 2: Data of electrical equipment for short-circuit current calculations

IEC 60909-2:2008(E) comprises data of electrical equipment collected from different countries to be used when necessary for the calculation of short-circuit currents in accordance with IEC 60909-0. It may be applied for calculating short-circuit currents in low-voltage networks if they are in accordance with typical equipment employed in the user's country. The collected data and their evaluation may be used for medium- or high-voltage planning purposes and also for comparison with data given by manufacturers or electricity suppliers. For overhead lines and cables the electrical data may in some cases also be calculated from the physical dimensions and the material following the equations given in this report. This second edition cancels and replaces the first edition published in 1992 and constitutes a technical revision. The significant technical changes with respect to the previous edition are as follows:
- Subclause 2.5 gives equations and examples for the calculation of the positive-, the negative- and the zero-sequence impedances and reduction factors for high-, medium and low-voltage cables with sheaths and shields earthed at both ends.
- Subclause 2.7 gives equations and figures for the calculation of the positive-sequence impedances of busbar configurations.

General Information

Status
Published
Publication Date
12-Nov-2008
Technical Committee
Current Stage
PPUB - Publication issued
Start Date
15-Feb-2009
Completion Date
13-Nov-2008
Ref Project

Buy Standard

Technical report
IEC TR 60909-2:2008 - Short-circuit currents in three-phase a.c. systems - Part 2: Data of electrical equipment for short-circuit current calculations
English language
43 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC/TR 60909-2
Edition 2.0 2008-11
TECHNICAL
REPORT

Short-circuit currents in three-phase a.c. systems –
Part 2: Data of electrical equipment for short-circuit current calculations


IEC/TR 60909-2:2008(E)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2008 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00

---------------------- Page: 2 ----------------------
IEC/TR 60909-2
Edition 2.0 2008-11
TECHNICAL
REPORT

Short-circuit currents in three-phase a.c. systems –
Part 2: Data of electrical equipment for short-circuit current calculations


INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
X
ICS 17.220.01; 29.240.20 ISBN 978-2-88910-327-0
® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 3 ----------------------
– 2 – TR 60909-2 © IEC:2008(E)
CONTENTS
FOREWORD.4
1 General .6
1.1 Scope and object.6
1.2 Normative references .6
2 Data for electrical equipment .6
2.1 General .6
2.2 Data of typical synchronous machines.7
2.3 Data of typical two-winding, three-winding and auto-transformers.10
2.4 Data of typical overhead lines, single and double circuits .14
2.5 Data of typical high-voltage, medium-voltage and low-voltage cables .20
2.6 Data of typical asynchronous motors .35
2.7 Busbars.38
Annex A (informative) Information from National Committees.42
Bibliography.43

Figure 1 – Subtransient reactance of synchronous machines 50 Hz and 60 Hz
(Turbogenerators, salient pole generators, motors SM and condensers SC) .8
Figure 2 – Rated Voltage U and rated power factor cosϕ of synchronous machines
rG rG
(Turbo generators, salient pole generators, moto
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.