iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 62562:2010

(Main)

Cavity resonator method to measure the complex permittivity of low-loss dielectric plates

Cavity resonator method to measure the complex permittivity of low-loss dielectric plates

IEC 62562:2010 describes a measurement method of dielectric properties in the planar direction of dielectric plate at microwave frequency, called a cavity resonator method. It has been created in order to develop new materials and to design microwave active and passive devices for which standardization of measurement methods of material properties is more and more important. This first edition cancels and replaces the PAS published in 2008. This bilingual version, published in 2010-05, corresponds to the English version.
This publication contains colours which are considered to be useful for the correct understanding of its contents.

Méthode de la cavité résonante pour mesurer la permittivité complexe des plaques diélectriques à faibles pertes

IEC 62562:2010 décrit une méthode de mesure des propriétés diélectriques en hyperfréquence dans la direction du plan d'une plaque diélectrique. Cette méthode est appelée méthode de la cavité résonante. Elle a été créée pour élaborer de nouveaux matériaux et pour concevoir des dispositifs micro-ondes actifs et passifs pour lesquels la normalisation des méthodes de mesure des propriétés des matériaux est de plus en plus importante. La présente version bilingue, publiée en 2010-05, correspond à la version anglaise.
Cette publication indique qu'elle contient des couleurs qui sont considérées comme utiles à une bonne compréhension de son contenu.

General Information

Status
Published
Publication Date
17-Feb-2010
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
17.220.01 - Electricity. Magnetism. General aspects
Technical Committee
SC 46F - RF and microwave passive components
Drafting Committee
PT 62562 - TC 46/SC 46F/PT 62562
Current Stage
PPUB - Publication issued
Start Date
31-Mar-2010
Completion Date
18-Feb-2010
Ref Project

Buy Standard

IEC 62562:2010 - Cavity resonator method to measure the complex permittivity of low-loss dielectric platesIEC 62562:2010 - Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
PreviousNext
Standard
IEC 62562:2010 - Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
English and French language
37 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC 62562
®
Edition 1.0 2010-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside


Cavity resonator method to measure the complex permittivity of low-loss
dielectric plates

Méthode de la cavité résonante pour mesurer la permittivité complexe des
plaques diélectriques à faibles pertes

IEC 62562:2010

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2010 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00


A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00

---------------------- Page: 2 ----------------------
IEC 62562
®
Edition 1.0 2010-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside


Cavi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 60335-2-25:2020(Main)
Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens

IEC 60335-2-25:2020 is available as IEC 60335-2-25:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60335-2-25:2019 deals with the safety of microwave ovens for household and similar use, their rated voltage being not more than 250 V.
This standard also deals with combination microwave ovens, for which Annex AA is applicable.
This standard also deals with microwave ovens intended to be used on board ships, for which Annex BB is applicable.
Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. However, if the appliance is intended to be used professionally to process food for commercial purposes, the appliance is not considered to be for household and similar use only.
As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account
– persons (including children) whose physical, sensory or mental capabilities or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction;
– children playing with the appliance.
Attention is drawn to the fact that
– for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements can be necessary;
– in many countries, additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour and similar authorities.
This standard does not apply to
– commercial microwave ovens (IEC 60335-2-90);
– industrial microwave heating equipment (IEC 60519-6);
– appliances for medical purposes (IEC 60601);
– appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas).
This seventh edition cancels and replaces the sixth edition published in 2010, Amendment 1:2014 and Amendment 2:2015. This edition constitutes a technical revision.
This edition includes the following significant changes with respect to the sixth edition:
– 11.7 and 19.13 are improved in clarity;
– in 19.102, a note is converted into normative text;
– 19.101 is improved with an alternative measurement method;
– 22.121 is improved with requirements for simultaneous activation of heating elements and motors;
– 15.2, 15.101, 21, 22.102, 22.112, 22.119, 22.120, 24.101 and 27.1 are improved in clarity;
– Annex A has editorial improvements and feasible limits of deviations.
This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments. It was established on the basis of the fifth edition (2010) of that standard.

  • Standard
    75 pages
    English and French language
    sale 15% off
IEC
IEC TR 61916:2017(Main)
Electrical accessories - Harmonization of general rules

IEC TR 61916:2017(E) provides guidance on requirements and tests for subjects applicable to electrical accessories that are within the scope of IEC TC 23 and its subcommittees.
This fourth edition cancels and replaces the third edition published in 2014 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) clarification of the introduction and the scope;
b) clarification of subclause 6.3;
c) modification of Clause 7;
d) modification of Clause 10;
e) addition of Annex B for temperature selection for GWEPT.

  • Technical report
    34 pages
    English language
    sale 15% off
IEC
IEC 60404-15:2012(Main)
Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials

IEC 60404-15:2012 specifies a solenoid method, a magnetic moment method, a magnetic balance method and a permeability meter method for the determination of the relative magnetic permeability of feebly magnetic materials (including austenitic stainless steel). The magnetic balance and permeability meter methods are both comparison methods calibrated using reference materials to determine the value of the relative magnetic permeability of the test specimen.

  • Standard
    41 pages
    English and French language
    sale 15% off
IEC
IEC 60404-15:2012/AMD1:2016(Amendment)
Amendment 1 - Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials
  • Standard
    12 pages
    English and French language
    sale 15% off
IEC
IEC 60127-5:2016(Main)
Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links

IEC 60127-5:2016 gives a guide for tests for assessing the quality of miniature fuse-links other than type tests, for the case where there is no complete agreement between the user and the manufacturer on what such tests apply. This document provides guidelines and limits generally acceptable for quality control purposes by large scale users and manufacturers of miniature fuse-links. This document has validity for large scale series with lot sizes of 10 000 and more. It is also applicable for smaller lot sizes, if necessary. Periodic inspections by reduced type tests (Clause 5) are intended to be carried out periodically in order to ensure that the level of technical performance previously verified by complete type tests as given in subsequent parts of the IEC 60127 series is maintained. The frequency of periodic in relation to lot-by-lot inspections is not established in this document. This second edition cancels and replaces the first edition published in 1988. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- addition of new tables in 4.3;
- addition of new tables in Clause 5.
Keywords: quality of miniature fuse-links

  • Standard
    25 pages
    English and French language
    sale 15% off
IEC
IEC 62679-3-3:2016(Main)
Electronic paper displays - Part 3-3: Optical measuring methods for displays with integrated lighting units

IEC 62679-3-3:2016(E) specifies the standard measurement conditions and measurement methods for determining the optical performance of electronic paper display (EPD) devices which have an operating integrated lighting unit (such as a front light). The scope of this document is restricted to EPDs using segmented or matrix structures with either monochromatic or colour type displays. The measurement methods are intended for EPDs operated in a reflective mode with the integrated lighting unit (ILU) turned on in a dark or indoor ambient lighting environment. Colour systems beyond three primaries are not covered in this document.

  • Standard
    41 pages
    English language
    sale 15% off
IEC
IEC 60909-0:2016(Main)
Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents

IEC 60909-0:2016 is applicable to the calculation of short-circuit currents in low-voltage three-phase AC systems, and in high-voltage three-phase AC systems, operating at a nominal frequency of 50 Hz or 60 Hz. It establishes a general, practicable and concise procedure leading to results which are generally of acceptable accuracy and deals with the calculation of short-circuit currents in the case of balanced or unbalanced short circuits. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- contribution of windpower station units to the short-circuit current;
- contribution of power station units with ful size converters to the short-circuit current;
- new document structure.
This publication is to be read in conjunction with IEC TR 60909-1:2002, IEC TR 60909-2:2008, IEC 60909-3:2009 and IEC TR 60909-4:2000.

  • Standard
    149 pages
    English and French language
    sale 15% off
IEC
IEC TR 60865-2:2015(Main)
Short-circuit currents - Calculation of effects - Part 2: Examples of calculation

IEC TR 60865-2:2015(E) shows the application of procedures for the calculation of mechanical and thermal effects due to short circuits as presented in IEC 60865-1. Thus, this technical report is an addition to IEC 60865-1. It does not, however, change the basis for standardized procedures given in that publication. This second edition cancels and replaces the first edition published in 1994 and constitutes a technical revision. It includes the following changes. The determinations for auto reclosure together with rigid conductors have been revised. The configurations in cases of flexible conductor arrangements have been changed. The influence of mid-span droppers to the span has been included. For vertical cable-connection the displacement and the tensile force onto the lower fixing point may be calculated now. Additional recommendations for foundation loads due to tensile forces have been added. The subclause for determination of the thermal equivalent short-circuits current has been deleted (is part of IEC 60909-0:2001 now). The standard IEC 60865-1:2011 has been reorganized and some of the symbols have been changed to follow the conceptual characteristic of international standards.

  • Technical report
    83 pages
    English language
    sale 15% off
IEC
IEC 60404-11:1991+AMD1:1998+AMD2:2012 CSV(Main)
Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip

IEC 60404-11:1991+A1:1998+A2:2012 is intended to define a measurement method for the determination of the characteristics of surface insulation resistance of magnetic sheet and strip. This method is applicable to magnetic sheet and strip insulated on one or both surfaces and is suitable for manufacturing control in the application of insulation coatings. This consolidated version consists of the first edition (1991), its amendment 1 (1998) and its amendment 2 (2012). Therefore, no need to order amendments in addition to this publication.

  • Standard
    20 pages
    English and French language
    sale 15% off
IEC
IEC 60404-11:1991/AMD2:2012(Amendment)
Amendment 2 - Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip
  • Standard
    8 pages
    English and French language
    sale 15% off