iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC TR 63463:2024

(Main)

Life extension guidelines for HVDC converter stations

Life extension guidelines for HVDC converter stations

IEC TR 63463:2024 provides guidelines for the general procedure for performing life assessment for an HVDC converter station. Following this, a more detailed description of performance issues of the thyristor based HVDC systems is given and the life assessment measures of equipment and guidelines for accessing the techno-economic life of equipment are given. This document also deals with information for specification of refurbishing HVDC system and the testing of the refurbished and replaced equipment. Lastly, this document outlines environmental issues and regulatory issues involved in the life assessment and concludes with a financial analysis of the refurbishment options.

General Information

Status
Published
Publication Date
08-Jan-2024
ICS
29.020 - Electrical engineering in general
29.240.10 - Substations. Surge arresters
Technical Committee
TC 115 - High Voltage Direct Current (HVDC) transmission for DC voltages above 100 kV
Drafting Committee
WG 12 - TC 115/WG 12
Current Stage
PPUB - Publication issued
Start Date
24-Nov-2023
Completion Date
09-Jan-2024
Ref Project

Buy Standard

IEC TR 63463:2024 - Life extension guidelines for HVDC converter stations Released:9. 01. 2024IEC TR 63463:2024 - Life extension guidelines for HVDC converter stations Released:9. 01. 2024
PreviousNext
Technical report
IEC TR 63463:2024 - Life extension guidelines for HVDC converter stations Released:9. 01. 2024
English language
100 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC TR 63463
®

Edition 1.0 2024-01
TECHNICAL
REPORT

colour
inside


Life extension guidelines for HVDC converter stations


IEC TR 63463:2024-01(en)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2024 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews, graphical symbols and the glossary.
committee, …). It also gives information on projects, replaced With a subscription you will always have access to up to date
and withdrawn publications. content tailored to your needs.


IEC Just Published - webstore.iec.ch/justpublished
Electropedia - www.electropedia.org
Stay up to date on all new IEC publications. Just Published
The world's leading online dictionary on electrotechnology,
details all new publications released. Available online and once
containing more than 22 500 terminological entries in English
a month by email.
and French, with equivalent terms in 25 additional languages.

Also known as the International Electrotechnical Vocabulary
IEC Customer Service Centre - webstore.iec.ch/csc
(IEV) online.
If you wish to give us your feedback on this publication or need


further assistance, please contact the Customer Service
Centre: sales@iec.ch.

---------------------- Page: 2 ----------------------
IEC TR 63463

®


Edition 1.0 2024-01




TECHNICAL



REPORT








colour

inside










Life extension guidelines for HVDC converter stations




























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 29.020; 29.240.10 ISBN 978-2-8322-8064-5




  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 3 ----------------------
– 2 – IEC TR 63463:2024 © IEC 2024
CONTENTS
FOREWORD . 7
INTRODUCTION . 9
1 Scope . 12
2 Normative references . 12
3 Terms and definitions . 12
4 General procedure for performing a life assessment . 14
4.1 General . 14
4.2 Preparation . 15
4.3 Team . 15
4.4 Assessment process . 16
4.5 Deliverable . 17
4.6 Life assessment timetable . 17
5 Thyristor based HVDC systems performance issues . 20
5.1 General .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC GUIDE 111-1:2023(Main)
Electric equipment for high-voltage substations - Common recommendations for product and system standards - Part 1: AC (alternating current)

IEC Guide 111-1:2023 is a horizontal publication which gives guidance for the harmonization of product and system standards for HV substations (higher than 1 kV). It addresses AC equipment which is found in high-voltage (HV) substations in most cases.
This document contains recommendations for common specifications for all HV substation product and system standards, each of which is augmented by the technical background specific to each technical committee, which naturally retains freedom in its technical choices.
This document is applicable when developing product and systems standards for HV power electronic equipment for the AC part of the substation.
This first edition of IEC Guide 111-1, together with IEC Guide 111-2, cancels and replaces the second edition of IEC Guide 111 published in 2004.
The main changes with respect to the previous edition are as follows:  
IEC Guide 111 is revised into two parts – Part 1 for AC and Part 2 for DC (Part 2 to be prepared);
the scope of the document has been expanded to cover electric equipment in AC high-voltage substations;
new definitions have been included;
normal conditions have been revised;
a general revision of other clauses.

  • Guide
    75 pages
    English and French language
    sale 15% off
IEC
IEC GUIDE 111:2004(Main)
Electrical high-voltage equipment in high-voltage substations - Common recommendations for product standards

Horizontal publication giving guidance for the harmonization of product and system standards within substations where the highest voltage for equipment is higher than 1 kV. Contains recommendations for common specifications for all HV substation product standards, each of which is augmented by the technical background specific to each TC, which naturally retains freedom in its technical choices. For use by TCs involved in high-voltage (HV) substation systems, such as TCs 13, 14, 17, 20, 22, 28, 32, 33, 36, 37, 38, 57, 95 and 99.

  • Guide
    21 pages
    English language
    sale 15% off
IEC
IEC 60335-2-124:2024(Main)
Household and similar electrical appliances - Safety - Part 2-124: Particular requirements for commercial dry ice blasting machines

IEC 60335-2-124:2024 deals with the safety of dry ice blasting machines intended for commercial indoor or outdoor use for the hand-guided cleaning, decoating and stripping of surfaces. The blasting machines are either equipped with containers for storage of dry ice or produce dry ice internally. These machines are not equipped with a traction drive.
The following power systems are covered:
- mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances,
- battery-operated machines.
This standard does not apply to
- dry ice blasting machines with integrated generation of compressed air;
- dry ice blasting machines using other transport gases besides compressed air or nitrogen;
- dry ice blasting machines with nozzles being controlled by robotic arms;
- spray extraction machines for commercial use (IEC 60335-2-68);
- high pressure cleaners (IEC 60335-2-79);
- sand blasting equipment (abrasive blasting);
- hand-held and transportable motor-operated electric tools (IEC 60745 series, IEC 61029 series, IEC 62841 series);
- machines designed for use in corrosive or explosive environments (dust, vapour or gas);
- machines designed for use in vehicles in non-ventilated environment;
- machines designed for use on board of ships or aircraft.

  • Standard
    66 pages
    English and French language
    sale 15% off
IEC
IEC TS 61934:2024(Main)
Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses

IEC TS 61934:2024 is available as IEC TS 61934:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC TS 61934:2024 is applicable to the off-line electrical measurement of partial discharges (PDs) that occur in electrical insulation systems (EISs) when stressed by repetitive voltage impulses generated from power electronics devices.
Typical applications are EISs belonging to apparatus driven by power electronics, such as motors, inductive reactors, wind turbine generators and the power electronics modules themselves.
NOTE Use of this document with specific products can require the application of additional procedures.
Excluded from the scope of this document are:
- methods based on optical or ultrasonic PD detection,
- fields of application for PD measurements when stressed by non-repetitive impulse voltages such as lightning impulse or switching impulses from switchgear.
This edition includes the following significant technical changes with respect to the previous edition:
a) background information on the progress being made in the field of power electronics including the introduction of wide band gap semiconductor devices has been added to the Introduction;
b) voltage impulse generators; the parameter values of the voltage impulse waveform have been modified to reflect application of wide band gap semiconductor devices.
c) PD detection methods; charge-based measurements are not described in this third edition nor are source-controlled gating techniques to suppress external noise.
d) Since the previous edition in 2011, there have been significant technical advances in this field as evidenced by several hundreds of publications. Consequently, the Bibliography in the 2011 edition has been deleted in this third edition.

  • Technical specification
    27 pages
    English language
    sale 15% off
IEC
IEC 61360-7:2024(Main)
Standard data element types with associated classification scheme - Part 7: Data dictionary of cross-domain concepts

IEC 61360-7:2024 specifies the new data dictionary (domain) "IEC 61360-7 - General items" including its generic concepts. The IEC 61360-7 data dictionary provides concepts (dictionary elements, e.g. classes, properties) intended for cross-domain use.
This document has the status of a horizontal publication in accordance with IEC Guide 108.
The IEC 61360-7 data dictionary is published in IEC CDD and is available at https://cdd.iec.ch.

  • Standard
    11 pages
    English language
    sale 15% off
IEC
ISO/IEC 14543-5-104:2024(Main)
Information technology - Home electronic system (HES) architecture - Part 5-104: Intelligent grouping and resource sharing for HES Class 2 and Class 3 - RA server-based smart lock application

ISO/IEC 14543-5-194:2024(E) specifies the remote access (RA) server-based application framework, device interaction model, flow process and interfaces, and message formats to achieve intelligent grouping, resource sharing and service collaboration among IGRS smart lock devices.
This document is applicable to smart lock devices with direct network connections or connections through an intermediary network to a server for security authentication. This server utilizes a method to minimize the possibility of unauthorized access to these smart locks, while maintaining seamless interoperability among users, smart lock devices and RA servers at home, office or other remote environments.

  • Standard
    28 pages
    English language
    sale 15% off
IEC
IEC 60695-2-10:2021/COR1:2024(Corrigendum)
Corrigendum 1 - Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
  • Standard
    4 pages
    English and French language
    sale 15% off
IEC
IEC 62841-4-5:2021/COR1:2024(Corrigendum)
Corrigendum 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-5: Particular requirements for grass shears

IEC 62841-4-5:2021 This document applies to grass shears with a maximum cutting width of 200 mm designed primarily for cutting grass.
This document does not apply to hedge trimmers.
Hedge trimmers are covered by IEC 62841-4-2.

  • Standard
    2 pages
    English and French language
    sale 15% off
IEC
IEC TS 62898-3-2:2024(Main)
Microgrids - Part 3-2: Technical requirements - Energy management systems

IEC TS 62898-3-2:2024 provides technical requirements for the operation of energy management systems of microgrids. This document applies to utility-interconnected or islanded microgrids. This document describes specific recommendations for low-voltage (LV) and medium-voltage (MV) systems.
This document focuses on developing standards of energy management systems aimed for microgrids integrated in decentralized energy systems or public distribution grids. It concerns some particularities that are not totally covered by the existing conventional energy system. The microgrid energy management systems are being studied by various actors (utilities, manufacturers, and energy providers) on actual demonstration projects and application use case. The aims of this document are to make the state of the art of existing energy management systems used in actual microgrids projects, to classify the relevant functions which can be accomplished by microgrid energy management systems, and to recommend necessary technical requirements for energy management systems of future microgrids.
This document includes the following items:
• main performances of key components of microgrid: decentralized energy resources, energy storages and controllable loads),
• description of main functions and topological blocks of microgrid energy management systems (MEMS),
• specification of information exchange protocol between main function blocks, linked to microgrid monitoring and control systems (MMCS).
Main functions of MEMS:
• power and energy management among different resources within microgrid including active and reactive power flows with different time scales,
• power and energy forecasts of microgrid,
• energy balancing between upstream grid and microgrid energy resources according to power and energy forecast and upstream and local constraints,
• economic and environmental optimization,
• possible service capacities such as capacity market auctions and resiliency anticipation: new business models,
• data archiving, trending, reporting and evaluation of operation capacities in various operation modes.
MEMS can have some other additional functions according to microgrid size and actual application cases:
• tariff and market trading management,
• utility ancillary services such as frequency regulation, voltage regulation, power quality and reliability improvement, demand response possibilities, change of operation modes linked to MMCS.

  • Technical specification
    70 pages
    English language
    sale 15% off
IEC
IEC 63203-402-3:2024(Main)
Wearable electronic devices and technologies - Part 402-3: Performance measurement of fitness wearables - Test methods for the determination of the accuracy of heart rate

IEC 63203-402-3:2024 specifies terms, a measurement protocol, and a test to evaluate the accuracy of wearables that measure heart rate with a photoplethysmography (PPG) sensor. While this document can be used to measure a variety of different devices claiming to report heart rate, care will be taken when testing in countries that differentiate between heart rate and pulse rate. This measurement protocol is not intended to evaluate medical devices associated with the IEC 60601 series or ISO 80601 series.

  • Standard
    34 pages
    English and French language
    sale 15% off