IEC 60061-1:1969/AMD43:2010
(Amendment)Amendment 43 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
Amendment 43 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
Subscribe to IEC 60061 Database to access the full and updated content of the series.
Amendement 43 - Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité - Partie 1: Culots de lampes
Subscribe to IEC 60061 Database to access the full and updated content of the series.
General Information
Standards Content (Sample)
NORME CEI
INTERNATIONALE IEC
INTERNATIONAL 60061-1
STANDARD
AMENDEMENT 43
AMENDMENT 43
2010-02
Amendement 43
Culots de lampes et douilles ainsi que calibres
pour le contrôle de l'interchangeabilité
et de la sécurité –
Partie 1:
Culots de lampes
Amendment 43
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 1:
Lamp caps
Les feuilles de cet amendement sont à insérer dans la
CEI 60061-1 (1969)
The sheets contained in this amendment are to be inserted
in IEC 60061-1 (1969)
© IEC 2010 Droits de reproduction réservés ⎯ Copyright - all rights reserved
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
---------------------- Page: 1 ----------------------
NORME CEI
INTERNATIONALE IEC
INTERNATIONAL
60061-1
STANDARD
Edition 3.43
2010-02
Modifiée selon les Compléments:
Amended in accordance with Supplements:
A(1970), B(1971), C(1972), D(1972), E(1972), F(1975), G(1977)
H(1977), J(1980), K(1983), L(1987), M(1989), N(1992), P(1994)
Q(1994), R(1995), S(1996), T(1996), U(1996), V(1997),
et les amendements/amendments 21(1998), 22(1999), 23(1999), 24(2000), 25(2001), 26(2001),
27(2001), 28(2002), 29(2002), 30(2002), 31(2003), 32(2003), 33 (2003), 34 (2004), 35 (2004),
36 (2005), 37 (2006), 38 (2007), 39 (2007), 40 (2008), 41 (2009), 42 (2009) et/and 43 (2010)
Culots de lampes et douilles ainsi que calibres
pour le contrôle de l'interchangeabilité
et de la sécurité –
Partie 1:
Culots de lampes
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 1:
Lamp caps
© IEC 2010 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
---------------------- Page: 2 ----------------------
60061-1 Amend. 43 © CEI/IEC:2010
SOMMAIRE CONTENTS
SOMMAIRE PAR DÉSIGNATION . Pages CONTENTS BY DESIGNATION . Page
PRÉAMBULE. 4 FOREWORD. 5
PRÉFACE. 4 PREFACE. 5
Feuilles Sheet
Culots à deux broches G1.27, GX1.27 & GY1.3 . 7004-2-2 Bi-pin caps G1.27, GX1.27 & GY1.3. 7004-2-2
Culots à deux broches G2.54, GX2.54 & GY2.5 . 7004-3-2 Bi-pin caps G2.54, GX2.54 & GY2.5. 7004-3-2
Culots à deux broches G3.17 & GY3.2. 7004-4-2 Bi-pin caps G3.17 & GY3.2 . 7004-4-2
Culots PX26d. 7004-5-6 Caps PX26d. 7004-5-6
Culots à vis E11. 7004-6-1 Screw caps E11. 7004-6-1
Culots à vis EY10 . 7004-7-1 Screw caps EY10. 7004-7-1
Culots à baïonnette BAX9s. 7004-8-1 Bayonet caps BAX9s. 7004-8-1
Culots à baïonnette BAY9s. 7004-9-1 Bayonet caps BAY9s. 7004-9-1
Culots B22d. 7004-10-7 Caps B22d . 7004-10-7
Culot à baïonnette B22d-3(90°/135°)/25x26. 7004-10A-2 Bayonet cap B22d-3(90°/135°)/25x26. 7004-10A-2
Culots B15d.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.