iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 62493:2009

(Main)

Assessment of lighting equipment related to human exposure to electromagnetic fields

Assessment of lighting equipment related to human exposure to electromagnetic fields

IEC 62493:2009 applies to the assessment of lighting equipment related to human exposure to electromagnetic fields. The assessment consists of the induced current density for frequencies from 20 kHz to 10 MHz and the specific absorption rate (SAR) for frequencies from 100 kHz to 300 MHz around lighting equipment. This standard does not apply to built-in components for luminaires such as electronic control gear.

Évaluation d'un équipement d'éclairage relativement à l'exposition humaine aux champs électromagnétiques

La CEI 62493:2009 traite de l'évaluation d'un équipement d'éclairage relativement à l'exposition humaine aux champs électromagnétiques. L'évaluation comprend la densité du courant induit pour les fréquences comprises entre 20 kHz et 10 MHz et le débit d'absorption spécifique (SAR) pour les fréquences comprises entre 100 kHz et 300 MHz autour de l'équipement d'éclairage. La présente norme ne s'applique pas aux composants intégrés dans des luminaires, tels que les appareillages électroniques.

General Information

Status
Published
Publication Date
09-Dec-2009
ICS
29.020 - Electrical engineering in general
29.140.99 - Other standards related to lamps
Technical Committee
TC 34 - Lighting
Drafting Committee
PT 62493 - TC 34/PT 62493
Current Stage
DELPUB - Deleted Publication
Completion Date
10-Mar-2015
Ref Project

Relations

Revised
IEC 62493:2015 - Assessment of lighting equipment related to human exposure to electromagnetic fields
Effective Date
05-Sep-2023

Buy Standard

IEC 62493:2009 - Assessment of lighting equipment related to human exposure to electromagnetic fields Released:12/10/2009IEC 62493:2009 - Assessment of lighting equipment related to human exposure to electromagnetic fields Released:12/10/2009
PreviousNext
Standard
IEC 62493:2009 - Assessment of lighting equipment related to human exposure to electromagnetic fields Released:12/10/2009
English and French language
82 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC 62493
®
Edition 1.0 2009-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Assessment of lighting equipment related to human exposure to
electromagnetic fields

Evaluation d’un équipement d’éclairage relativement à l’exposition humaine aux
champs électromagnétiques

IEC 62493:2009

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2009 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: 0Hinmail@iec.ch
Web: 1Hwww.iec.ch

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: 2Hwww.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: 3Hwww.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: 4Hwww.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: 5Hwww.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: 6Hcsc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00


A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: 7Hwww.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: 8Hwww.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: 9Hwww.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: 10Hwww.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: 11Hcsc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00

---------------------- Page: 2 ----------------------
IEC 62493
®
Edition 1.0 2009-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Assessment of ligh
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 62493:2015/AMD1:2022(Amendment)
Amendment 1 - Assessment of lighting equipment related to human exposure to electromagnetic fields
  • Standard
    13 pages
    English and French language
    sale 15% off
IEC
IEC 62493:2015(Main)
Assessment of lighting equipment related to human exposure to electromagnetic fields

IEC 62493:2015 applies to the assessment of lighting equipment related to human exposure to electromagnetic fields. The assessment consists of the induced internal electric field for frequencies from 20 kHz to 10 MHz and the specific absorption rate (SAR) for frequencies from 100 kHz to 300 MHz around lighting equipment. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) identification of lighting product types deemed to comply with the standard without the need for test;
b) deletion of the need for CISPR-15-compliance as a prerequisite for IEC 62493 compliance;
c) inclusion of the consequences of the ICNIPR 2010 guidelines for (up to 100 kHz);
d) adding some guidance to the Van der Hoofden test head method to improve reproducibility of results;
e) inclusion of compliance demonstration method for products having intentional radiators.

  • Standard
    133 pages
    English and French language
    sale 15% off
  • Standard
    267 pages
    English and French language
    sale 15% off
IEC
IEC 62493:2015/AMD1:2022(Amendment)
Amendment 1 - Assessment of lighting equipment related to human exposure to electromagnetic fields
  • Standard
    13 pages
    English and French language
    sale 15% off
IEC
IEC 62386-221:2018(Main)
Digital addressable lighting interface - Part 221: Particular requirements for control gear - Demand response (device type 20)

IEC 62386-221:2018 specifies the methodology of demand response which focuses on the curtailment of electric loads during peak demand times thus avoiding the requirement to find new sources of generation capacity. By using load shedding, the lighting system responds to the demands of the energy supply.
This document is applicable to control gear supporting the demand response functionality.

  • Standard
    30 pages
    English and French language
    sale 15% off
IEC
IEC 62493:2015(Main)
Assessment of lighting equipment related to human exposure to electromagnetic fields

IEC 62493:2015 applies to the assessment of lighting equipment related to human exposure to electromagnetic fields. The assessment consists of the induced internal electric field for frequencies from 20 kHz to 10 MHz and the specific absorption rate (SAR) for frequencies from 100 kHz to 300 MHz around lighting equipment. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) identification of lighting product types deemed to comply with the standard without the need for test;
b) deletion of the need for CISPR-15-compliance as a prerequisite for IEC 62493 compliance;
c) inclusion of the consequences of the ICNIPR 2010 guidelines for (up to 100 kHz);
d) adding some guidance to the Van der Hoofden test head method to improve reproducibility of results;
e) inclusion of compliance demonstration method for products having intentional radiators.

  • Standard
    133 pages
    English and French language
    sale 15% off
  • Standard
    267 pages
    English and French language
    sale 15% off
IEC
IEC 63267-2-1:2024(Main)
Fibre optic interconnecting devices and passive components - Connector optical interfaces for enhanced macro bend multimode fibres - Part 2-1: Connection parameters of physically contacting 50 µm core diameter fibres - Non-angled
SIST IEC 60072-1:2001

IEC 63267-2-1:2024 defines a set of specified conditions for an enhanced macro bend of 50/125 µm, graded index multimode fibre optic connection that is maintained in order to satisfy the requirements of attenuation and return loss performance in a randomly mated pair of polished physically contacting (PC) fibres.
An encircled flux (EF) compliant launch condition in accordance with IEC 61300-1, at an operational wavelength of 850 nm, is used for determination of performance grades, based on lateral fibre core offset, numerical aperture (NA) mismatch, and fibre core diameter (CD) variation.
Fibre core angular offset is considered insignificant given the state-of-the-art and is excluded as a factor for attenuation estimation. Attenuation and return loss performance grades are defined in IEC 63267-1.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
IEC
IEC 60335-2-124:2024(Main)
Household and similar electrical appliances - Safety - Part 2-124: Particular requirements for commercial dry ice blasting machines

IEC 60335-2-124:2024 deals with the safety of dry ice blasting machines intended for commercial indoor or outdoor use for the hand-guided cleaning, decoating and stripping of surfaces. The blasting machines are either equipped with containers for storage of dry ice or produce dry ice internally. These machines are not equipped with a traction drive.
The following power systems are covered:
- mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances,
- battery-operated machines.
This standard does not apply to
- dry ice blasting machines with integrated generation of compressed air;
- dry ice blasting machines using other transport gases besides compressed air or nitrogen;
- dry ice blasting machines with nozzles being controlled by robotic arms;
- spray extraction machines for commercial use (IEC 60335-2-68);
- high pressure cleaners (IEC 60335-2-79);
- sand blasting equipment (abrasive blasting);
- hand-held and transportable motor-operated electric tools (IEC 60745 series, IEC 61029 series, IEC 62841 series);
- machines designed for use in corrosive or explosive environments (dust, vapour or gas);
- machines designed for use in vehicles in non-ventilated environment;
- machines designed for use on board of ships or aircraft.

  • Standard
    66 pages
    English and French language
    sale 15% off
IEC
IEC TS 61934:2024(Main)
Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses

IEC TS 61934:2024 is available as IEC TS 61934:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC TS 61934:2024 is applicable to the off-line electrical measurement of partial discharges (PDs) that occur in electrical insulation systems (EISs) when stressed by repetitive voltage impulses generated from power electronics devices.
Typical applications are EISs belonging to apparatus driven by power electronics, such as motors, inductive reactors, wind turbine generators and the power electronics modules themselves.
NOTE Use of this document with specific products can require the application of additional procedures.
Excluded from the scope of this document are:
- methods based on optical or ultrasonic PD detection,
- fields of application for PD measurements when stressed by non-repetitive impulse voltages such as lightning impulse or switching impulses from switchgear.
This edition includes the following significant technical changes with respect to the previous edition:
a) background information on the progress being made in the field of power electronics including the introduction of wide band gap semiconductor devices has been added to the Introduction;
b) voltage impulse generators; the parameter values of the voltage impulse waveform have been modified to reflect application of wide band gap semiconductor devices.
c) PD detection methods; charge-based measurements are not described in this third edition nor are source-controlled gating techniques to suppress external noise.
d) Since the previous edition in 2011, there have been significant technical advances in this field as evidenced by several hundreds of publications. Consequently, the Bibliography in the 2011 edition has been deleted in this third edition.

  • Technical specification
    27 pages
    English language
    sale 15% off
IEC
IEC 61360-7:2024(Main)
Standard data element types with associated classification scheme - Part 7: Data dictionary of cross-domain concepts

IEC 61360-7:2024 specifies the new data dictionary (domain) "IEC 61360-7 - General items" including its generic concepts. The IEC 61360-7 data dictionary provides concepts (dictionary elements, e.g. classes, properties) intended for cross-domain use.
This document has the status of a horizontal publication in accordance with IEC Guide 108.
The IEC 61360-7 data dictionary is published in IEC CDD and is available at https://cdd.iec.ch.

  • Standard
    11 pages
    English language
    sale 15% off
IEC
ISO/IEC 14543-5-104:2024(Main)
Information technology - Home electronic system (HES) architecture - Part 5-104: Intelligent grouping and resource sharing for HES Class 2 and Class 3 - RA server-based smart lock application

ISO/IEC 14543-5-194:2024(E) specifies the remote access (RA) server-based application framework, device interaction model, flow process and interfaces, and message formats to achieve intelligent grouping, resource sharing and service collaboration among IGRS smart lock devices.
This document is applicable to smart lock devices with direct network connections or connections through an intermediary network to a server for security authentication. This server utilizes a method to minimize the possibility of unauthorized access to these smart locks, while maintaining seamless interoperability among users, smart lock devices and RA servers at home, office or other remote environments.

  • Standard
    28 pages
    English language
    sale 15% off