Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-31: End face geometry - Flat PC PPS rectangular ferrule multimode fibres

IEC PAS 63267-3-31:2020 defines certain dimensional limits of a flat PC rectangular polyphenylene sulphide (PPS) ferrule optical interface in order to meet specific longitudinal offset requirements for fibre-to-fibre interconnection. Ferrules made from the material specified in this PAS are suitable for use in categories C, U, E, and O as defined in IEC 61753-1.
Ferrule interface dimensions and features are contained in IEC 61754 (all parts), which deals with fibre optic connector interfaces.

General Information

Status
Published
Publication Date
06-Feb-2020
Current Stage
PPUB - Publication issued
Start Date
21-Jan-2020
Completion Date
07-Feb-2020
Ref Project

Buy Standard

Technical specification
IEC PAS 63267-3-31:2020 - Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-31: End face geometry - Flat PC PPS rectangular ferrule multimode fibres
English language
16 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC PAS 63267-3-31
®

Edition 1.0 2020-02
PUBLICLY AVAILABLE
SPECIFICATION

colour
inside


Fibre optic interconnecting devices and passive components – Fibre optic
connector optical interfaces –
Part 3-31: End face geometry – Flat PC PPS rectangular ferrule multimode fibres
IEC PAS 63267-3-31:2020-02(en)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2020 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and once 67 000 electrotechnical terminology entries in English and
a month by email. French extracted from the Terms and Definitions clause of IEC
publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or need CISPR.

further assistance, please contact the Customer Service

Centre: sales@iec.ch.

---------------------- Page: 2 ----------------------
IEC PAS 63267-3-31

®


Edition 1.0 2020-02




PUBLICLY AVAILABLE



SPECIFICATION









colour

inside










Fibre optic interconnecting devices and passive components – Fibre optic

connector optical interfaces –

Part 3-31: End face geometry – Flat PC PPS rectangular ferrule multimode fibres


























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 33.180.20 ISBN 978-2-8322-7814-7




  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 3 ----------------------
– 2 – IEC PAS 63267-3-31:2020 © IEC 2020
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Description . 5
5 Interface parameters . 6
Annex A (normative)  Minus coplanarity . 10
Annex B (informative)  Minimum normal force required to achieve physical contact . 11
Bibliography . 16

Figure 1 – Fibre numbering conventions . 7
Figure 2– Interface dimensions related to longitudinal offs
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.