EN 61034-2:2005
(Main)Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
Provides details of the test procedure to be employed for the measurement of the density of smoke emitted from cables burning under defined conditions. It describes the means of preparing and assembling cables for test, the method of burning the cables, and gives recommended requirements for evaluating test results. The principal changes with respect to the previous edition are as follows: a) inclusion of cables down to 1 mm diameter; b) inclusion of non-circular cables; c) addition of guidance on testing cables above 80 mm diameter; d) delineation of elements of the test report; e) addition of guidance on the calculation for other parameters for fire safety engineering purposes; f) removal of minor differences with equivalent CENELEC work to allow parallel voting with that body. Has the status of a group safety publication in accordance with IEC Guide 104.
Messung der Rauchdichte von Kabeln und isolierten Leitungen beim Brennen unter definierten Bedingungen - Teil 2: Prüfverfahren und Anforderungen
Mesure de la densité de fumées dégagées par des câbles brûlant dans des conditions définies - Partie 2: Procédure d'essai et exigences
Fournit des détails de la procédure d'essai à employer pour la mesure de la densité des fumées émises par des câbles brûlant dans des conditions définies. Elle décrit les méthodes de préparation et d'assemblage des câbles en essais, la méthode d'inflammation des câbles, et donne des recommandations pour les exigences relatives à l'évaluation des résultats d'essais. Les principales modifications par rapport à l'édition précédente sont: a) l'introduction des câbles de diamètre allant jusqu' à 1 mm; b) l'introduction des câbles non circulaires; c) l'addition d'un guide sur les essais de câbles de diamètre supérieur à 80 mm; d) la suppression d'éléments du rapport d'essai; e) l'ajout d'un guide pour le calcul d'autres paramètres pour la conception de sécurité incendie; f) la suppression des petites différences par rapport aux travaux équivalents du CENELEC pour un vote parallèle. Elle a le statut de publication groupée de sécurité, conformément au Guide 104 de la CEI.
Merjenje gostote dima pri gorenju kablov pri določenih pogojih - 2. del: Preskusni postopek in zahteve (IEC 61034-2:2005)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 61034-2:2005
STANDARD
december 2005
Merjenje gostote dima pri gorenju kablov pri določenih pogojih – 2. del:
Preskusni postopek in zahteve (IEC 61034-2:2005)
Measurement of smoke density of cables burning under defined conditions – Part
2: Test procedure and requirements (IEC 61034-2:2005)
ICS 13.220.40; 29.060.20 Referenčna številka
SIST EN 61034-2:2005(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 61034-2
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2005
ICS 13.220.40; 29.020; 29.060.20 Supersedes EN 50268-2:1999
English version
Measurement of smoke density of cables
burning under defined conditions
Part 2: Test procedure and requirements
(IEC 61034-2:2005)
Mesure de la densité de fumées Messung der Rauchdichte von Kabeln
dégagées par des câbles brûlant und isolierten Leitungen beim Brennen
dans des conditions définies unter definierten Bedingungen
Partie 2: Procédure d'essai et exigences Teil 2: Prüfverfahren und Anforderungen
(CEI 61034-2:2005) (IEC 61034-2:2005)
This European Standard was approved by CENELEC on 2005-06-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61034-2:2005 E
---------------------- Page: 2 ----------------------
EN 61034-2:2005 - 2 -
Foreword
The text of document 20/755/FDIS, future edition 3 of IEC 61034-2, prepared by IEC TC 20, Electric
cables, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 61034-2 on 2005-06-01.
The principal changes with respect to EN 50268-2 are as follows:
a) inclusion of non-circular cables;
b) addition of guidance on testing cables above 80 mm diameter;
c) delineation of elements of the test report;
d) addition of guidance on the calculation for other parameters for fire safety engineering purposes.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-06-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61034-2:2005 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60695-6-1 NOTE Harmonized as EN 60695-6-1:2005 (not modified).
__________
---------------------- Page: 3 ----------------------
- 3 - EN 61034-2:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60695-4 2005 Fire hazard testing - Part 4: Terminology - -
concerning fire tests for electrotechnical
products
IEC 61034-1 2005 Measurement of smoke density of cables EN 61034-1 2005
burning under defined conditions
Part 1: Test apparatus
IEC Guide 104 1997 The preparation of safety publications - -
and the use of basic safety publications
and g
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.