EN 61019-1:2005

SLOVENSKI SIST EN 61019-1:2005

STANDARD
december 2005
Resonatorji za površinske akustične valove – 1. del: Generična specifikacija
(IEC 61019-1:2004)
Surface acoustic wave (SAW) resonators – Part 1: Generic specification (IEC
61019-1:2004)
ICS 31.140 Referenčna številka
SIST EN 61019-1:2005(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 61019-1
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2005

ICS 31.140


English version


Surface acoustic wave (SAW) resonators
Part 1: Generic specification
(IEC 61019-1:2004)


Résonateurs à ondes acoustiques  Oberflächenwellenresonatoren
de surface (OAS) (OFW-Resonatoren)
Partie 1: Spécification générique Teil 1: Fachgrundspezifikation
(CEI 61019-1:2004) (IEC 61019-1:2004)






This European Standard was approved by CENELEC on 2004-12-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61019-1:2005 E

---------------------- Page: 2 ----------------------

EN 61019-1:2005 - 2 -
Foreword
The text of document 49/689/FDIS, future edition 1 of IEC 61019-1, prepared by IEC TC 49,
Piezoelectric and dielectric devices for frequency control and selection, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61019-1 on 2004-12-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-12-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61019-1:2004 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61019-1:2005
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60027 Series Letter symbols to be used in electrical HD 60027 Series
technology HD 245

IEC 60050-561 1991 International Electrotechnical - -
Vocabulary (IEV)
Chapter 561: Piezoelectric devices for
frequency control and selection

1)
IEC 60068-1 1988 Environmental testing EN 60068-1 1994
Part 1: General and guidance

IEC 60068-2-1 1990 Part 2: Tests - Tests A: Cold EN 60068-2-1 1993

2)
IEC 60068-2-2 1974 Part 2: Tests - Tests B: Dry heat EN 60068-2-2 1993

IEC 60068-2-6 1995 Part 2: Tests - Test Fc: Vibration
+ corr. March 1995 (sinusoidal) EN 60068-2-6 1995

3)
IEC 60068-2-7 1983 Part 2: Tests - Test Ga: Acceleration, EN 60068-2-7 1993
steady state

IEC 60068-2-13 1983 Part 2: Tests - Test M: Low air pressure EN 60068-2-13 1999

4)
IEC 60068-2-14 1984 Part 2: Tests - Test N: Change of EN 60068-2-14 1999
temperature

IEC 60068-2-17 1994 Part 2: Tests - Test Q: Sealing EN 60068-2-17 1994

5)
IEC 60068-2-20 1979 Part 2: Tests - Test T: Soldering HD 323.2.20 S3 1988

IEC 60068-2-21 1999 Part 2-21: Tests - Test U: Robustness EN 60068-2-
...