EN IEC 60749-5:2024
(Main)Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state temperature humidity bias life test
Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state temperature humidity bias life test
IEC 60749-5:2023 is available as IEC 60749-5:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60749-5:2023 provides a steady-state temperature and humidity bias life test to evaluate the reliability of non-hermetic packaged semiconductor devices in humid environments. This test method is considered destructive. This edition includes the following significant technical changes with respect to the previous edition: a) The specification of the test equipment is changed to require the need to minimize relative humidity gradients and maximize air flow between semiconductor devices under test; b) The specification of the test equipment fixtures is changed to require the avoidance of condensation on devices under test and on electrical fixtures connecting the devices to the test equipment; c) replacement of references to “virtual junction” with “die”.
Halbleiterbauelemente - Mechanische und klimatische Prüfverfahren - Teil 5: Lebensdauerprüfung bei konstanter Temperatur und Feuchte unter elektrischer Beanspruchung
Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 5: Essai continu de durée de vie sous température et humidité avec polarisation
IEC 60749-5:2023 est disponible sous forme de IEC 60749-5:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L’IEC 60749-5:2023 décrit un essai continu de durée de vie utilisant la température et l’humidité avec polarisation pour évaluer la fiabilité des dispositifs à semiconducteurs sous boîtier non hermétique dans les environnements humides. Cette méthode d’essai est considérée comme destructive. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) la spécification de l’équipement d’essai est modifiée pour exiger la nécessité de réduire le plus possible les gradients d’humidité relative et d’augmenter le plus possible la circulation d’air entre les dispositifs à semiconducteurs en essai; b) la spécification des fixations de l’équipement d’essai est modifiée pour exiger la prévention de la condensation sur les dispositifs en essai et sur les fixations électriques reliant les dispositifs à l’équipement d’essai; c) le remplacement des références au terme "jonction virtuelle" par "pastille".
Polprevodniški elementi - Mehanske in klimatske preskusne metode - 5. del: Preskus življenjske dobe v dinamičnem ravnotežju vlažnosti in pri ustaljeni temperaturi (IEC 60749-5:2023)
Ta del standarda IEC 60749 določa preskus življenjske dobe v dinamičnem ravnotežju vlažnosti in pri ustaljeni temperaturi za vrednotenje zanesljivosti nehermetično pakiranih polprevodniških elementov v vlažnih okoljih.
Ta preskusna metoda se obravnava kot porušitvena.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 60749-5:2024
01-marec-2024
Polprevodniški elementi - Mehanske in klimatske preskusne metode - 5. del:
Preskus življenjske dobe v dinamičnem ravnotežju vlažnosti in pri ustaljeni
temperaturi (IEC 60749-5:2023)
Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state
temperature humidity bias life test (IEC 60749-5:2023)
Halbleiterbauelemente - Mechanische und klimatische Prüfverfahren - Teil 5:
Lebensdauerprüfung bei konstanter Temperatur und Feuchte unter elektrischer
Beanspruchung (IEC 60749-5:2023)
Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 5:
Essai continu de durée de vie sous température et humidité avec polarisation (IEC
60749-5:2023)
Ta slovenski standard je istoveten z: EN IEC 60749-5:2024
ICS:
31.080.01 Polprevodniški elementi Semiconductor devices in
(naprave) na splošno general
SIST EN IEC 60749-5:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 60749-5:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 60749-5:2024
EUROPEAN STANDARD EN IEC 60749-5
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2024
ICS 31.080.01 Supersedes EN 60749-5:2017
English Version
Semiconductor devices - Mechanical and climatic test methods -
Part 5: Steady-state temperature humidity bias life test
(IEC 60749-5:2023)
Dispositifs à semiconducteurs - Méthodes d'essais Halbleiterbauelemente - Mechanische und klimatische
mécaniques et climatiques - Partie 5: Essai continu de Prüfverfahren - Teil 5: Lebensdauerprüfung bei konstanter
durée de vie sous température et humidité avec polarisation Temperatur und Feuchte unter elektrischer Beanspruchung
(IEC 60749-5:2023) (IEC 60749-5:2023)
This European Standard was approved by CENELEC on 2024-01-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60749-5:2024 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60749-5:2024
EN IEC 60749-5:2024 (E)
European foreword
The text of document 47/2820/FDIS, future edition 3 of IEC 60749-5, prepared by IEC/TC 47
"Semiconductor devices" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 60749-5:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-10-23
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-01-23
document have to be withdrawn
This document supersedes EN 60749-5:2017 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60749-5:2023 was approved by CENELEC as a European
Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN IEC 60749-5:2024
EN IEC 60749-5:2024 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in su
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.