Expression of performance of gas analyzers - Part 2: Measuring oxygen in gas utilizing high-temperature electrochemical sensors

Applies to gas analyzers using high temperature electrochemical sensors for measurement of oxygen in gas. Applies to both 'in situ' and extractive analyzers installed indoors or outdoors.

Angabe zum Betriebsverhalten von Gasanalysatoren - Teil 2: Sauerstoffmessung in Gas unter Verwendung von elektrochemischen Hochtemperatur-Sensoren

Expression des qualités de fonctionnement des analyseurs de gaz - Partie 2: Mesure de l'oxygène contenu dans le gaz en utilisant des capteurs électrochimiques à haute température

S'applique aux analyseurs de gaz utilisant des capteurs électrochimiques à haute température pour la mesure de l'oxgène contenue dans les gaz. S'applique aux analyseurs Ôin-situ' et extractif installés à l'intérieur ou à l'extérieur.

Izražanje lastnosti analizatorjev plina - 2. del: Merjenje kisika v plinu z uporabo visokotemperaturnih elektrokemijskih senzorjev

Uporablja se za analizatorje plina z uporabo visokotemperaturnih elektrokemijskih senzorjev za merjenje kisika v plinu. Uporablja se za »in situ« in ekstraktivne analizatorje, ki so postavljeni v notranjih prostorih ali na prostem.

General Information

Status
Published
Publication Date
29-Aug-2019
Withdrawal Date
22-Jul-2022
Current Stage
6060 - Document made available - Publishing
Start Date
30-Aug-2019
Completion Date
30-Aug-2019

Relations

Buy Standard

Standard
EN IEC 61207-2:2019
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61207-2:2019
01-november-2019
Nadomešča:
SIST EN 61207-2:1998
Izražanje lastnosti analizatorjev plina - 2. del: Merjenje kisika v plinu z uporabo
visokotemperaturnih elektrokemijskih senzorjev
Expression of performance of gas analyzers - Part 2: Measuring oxygen in gas utilizing
high-temperature electrochemical sensors (IEC 61207-2:2019)
Angabe zum Betriebsverhalten von Gasanalysatoren - Teil 2: Sauerstoffmessung in Gas
unter Verwendung von elektrochemischen Hochtemperatur-Sensoren (IEC 61207-
2:2019)
Expression des qualités de fonctionnement des analyseurs de gaz - Partie 2: Mesure de
l'oxygène contenu dans le gaz en utilisant des capteurs électrochimiques à haute
température (IEC 61207-2:2019)
Ta slovenski standard je istoveten z: EN IEC 61207-2:2019
ICS:
71.040.20 Laboratorijska posoda in Laboratory ware and related
aparati apparatus
71.040.40 Kemijska analiza Chemical analysis
SIST EN IEC 61207-2:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61207-2:2019

---------------------- Page: 2 ----------------------
SIST EN IEC 61207-2:2019


EUROPEAN STANDARD EN IEC 61207-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2019
ICS 71.040.40; 71.040.20 Supersedes EN 61207-2:1994 and all of its amendments
and corrigenda (if any)
English Version
Expression of performance of gas analyzers - Part 2: Measuring
oxygen in gas utilizing high-temperature electrochemical sensors
(IEC 61207-2:2019)
Expression des qualités de fonctionnement des analyseurs Angabe zum Betriebsverhalten von Gasanalysatoren - Teil
de gaz - Partie 2: Mesure de l'oxygène contenu dans le gaz 2: Sauerstoffmessung in Gas unter Verwendung von
en utilisant des capteurs électrochimiques à haute elektrochemischen Hochtemperatur-Sensoren
température (IEC 61207-2:2019)
(IEC 61207-2:2019)
This European Standard was approved by CENELEC on 2019-07-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61207-2:2019 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61207-2:2019
EN IEC 61207-2:2019 (E)
European foreword
The text of document 65B/1156/FDIS, future edition 2 of IEC 61207-2, prepared by SC 65B
"Measurement and control devices" of IEC/TC 65 "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 61207-2:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-04-23
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-07-23
document have to be withdrawn
This document supersedes EN 61207-2:1994 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61207-2:2019 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60654 (series)  NOTE  Harmonized as EN 60654 (series)
ISO 9001 NOTE Harmonized as EN ISO 9001
2

---------------------- Page: 4 ----------------------
SIST E
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.