EN 61029-2-11:2012
(Main)Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws
Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws
Applies to combined mitre-bench saws intended for cutting non-ferrous metals such as aluminium, wood or similar materials. The blade diameter does not exceed 350 mm.
Sicherheit transportabler motorbetriebener Elektrowerkzeuge - Teil 2-11: Besondere Anforderungen für kombinierte Tisch- und Gehrungssägen
Sécurité des machines-outils électriques semi-fixes - Partie 2-11: Règles particulières pour les scies d'établi-scies à mortaiser
Varnost premičnih električnih orodij - 2-11. del: Posebne zahteve za kombinirane krožne žage z delovno mizo in za zajeralne žage
Ta evropski standard se uporablja za premične kombinirane krožne žage z delovno mizo ter zajeralne žage, katerih premer rezila je manjši od 315 mm ter so namenjene rezanju lesa in podobnih materialov, plastike ter barvnih kovin, razen magnezija.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61029-2-11:2013
01-marec-2013
9DUQRVWSUHPLþQLKHOHNWULþQLKRURGLMGHO3RVHEQH]DKWHYH]DNRPELQLUDQH
NURåQHåDJH]GHORYQRPL]RLQ]D]DMHUDOQHåDJH
Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements
for combined mitre and bench saws
Sicherheit transportabler motorbetriebener Elektrowerkzeuge - Teil 2-11: Besondere
Anforderungen für kombinierte Tischund Gehrungssägen
Sécurité des machines-outils électriques semi-fixes - Partie 2-11: Règles particulières
pour les scies d'établi-scies à mortaiser
Ta slovenski standard je istoveten z: EN 61029-2-11:2012
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 61029-2-11:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61029-2-11:2013
---------------------- Page: 2 ----------------------
SIST EN 61029-2-11:2013
EUROPEAN STANDARD
EN 61029-2-11
NORME EUROPÉENNE
October 2012
EUROPÄISCHE NORM
ICS 25.080.60; 25.140.20 Supersedes EN 61029-2-11:2009
English version
Safety of transportable motor-operated electric tools -
Part 2-11: Particular requirements for combined mitre and bench saws
(IEC 61029-2-11:2001, modified)
Sécurité des machines-outils Sicherheit transportabler
électriques semi-fixes - motorbetriebener Elektrowerkzeuge -
Partie 2-11: Règles particulières pour Teil 2-11: Besondere Anforderungen für
les scies d'établi-scies à mortaiser kombinierte Tisch- und Gehrungssägen
(CEI 61029-2-11:2001, modifiée) (IEC 61029-2-11:2001, modifiziert)
This European Standard was approved by CENELEC on 2012-09-03. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia,
Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands,
Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
-
Ref. No. EN 61029-2-11:2012 E
---------------------- Page: 3 ----------------------
SIST EN 61029-2-11:2013
EN 61029-2-11:2012 – 2 –
Contents
Foreword . 4
1 Scope . 6
2 Definitions . 6
3 General requirement . 7
4 General notes on tests . 7
5 Rating . 7
6 Classification . 7
7 Marking and information for use . 7
8 Protection against electric shock . 9
9 Starting . 9
10 Input and current . 10
11 Heating .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.