FprEN IEC 62896:2024
(Main)Hybrid insulators for a.c. and d.c. for high-voltage applications greater than 1000v AC and 1500 v DC - Definitions, test methods and acceptance criteria
Hybrid insulators for a.c. and d.c. for high-voltage applications greater than 1000v AC and 1500 v DC - Definitions, test methods and acceptance criteria
Hybridisolatoren für Wechsel- und Gleichspannungsanwendungen für Spannungen größer 1000 V AC und 1500 V DC – Begriffe, Prüfverfahren und Annahmekriterien
Hibridni izolatorji za izmenične in enosmerne visokonapetostne aplikacije za izmenične napetosti nad 1000 V in enosmerne napetosti nad 1500 V - Definicije, preskusne metode, merila sprejemljivost
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 62896:2023
01-april-2023
Hibridni izolatorji za izmenične in enosmerne visokonapetostne aplikacije za
izmenične napetosti nad 1000 V in enosmerne napetosti nad 1500 V - Definicije,
preskusne metode, merila sprejemljivost
Hybrid insulators for a.c. and d.c. for high-voltage applications greater than 1000V AC
and 1500 V DC - Definitions, test methods and acceptance criteria
Ta slovenski standard je istoveten z: prEN IEC 62896:2023
ICS:
29.080.10 Izolatorji Insulators
oSIST prEN IEC 62896:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 62896:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 62896:2023
36/554/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62896 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-01-27 2023-04-21
SUPERSEDES DOCUMENTS:
36/539/CD, 36/551A/CC
IEC TC 36 : INSULATORS
SECRETARIAT: SECRETARY:
Sweden Mr Dan Windmar
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of
• any relevant patent rights of which they are aware and to provide supporting documentation,
• any relevant “in some countries” clauses to be included should this proposal proceed. Recipients are
reminded that the enquiry stage is the final stage for submitting "in some countries" clauses. See
AC/22/2007.
TITLE:
Hybrid insulators for a.c. and d.c. for high-voltage applications greater than 1000V AC and 1500
V DC - Definitions, test methods and acceptance criteria
PROPOSED STABILITY DATE: 2026
NOTE FROM TC/SC OFFICERS:
Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing
National Committee positions. You may not copy or "mirror" the file or printed version of the document, o r any
part of it, for any other purpose without permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 62896:2023
IEC CDV 62896 © IEC 2022 2 36/554/CDV
1 CONTENTS
2 FOREWORD . 3
3 INTRODUCTION . 5
4 1 Scope . 6
5 2 Normative references. 6
6 3 Definitions . 7
7 4 Identification . 10
8 5 Environmental conditions . 10
9 6 Tolerances . 10
10 7 Classification of tests . 10
11 7.1 Design tests . 10
12 7.2 Type tests . 11
13 7.3 Sample tests . 11
14 7.4 Routine tests . 11
15 8 Design tests . 13
16 8.1 General . 13
17 8.2 Tests on interfaces and connections of end fittings . 14
18 8.2.1 General . 14
19 8.2.2 Pre-stressing .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.