EN IEC 62541-13:2020

SLOVENSKI STANDARD
SIST EN IEC 62541-13:2020
01-december-2020
Nadomešča:
SIST EN 62541-13:2015
Enotna arhitektura OPC - 13. del: Agregati (IEC 62541-13:2020)
OPC Unified Architecture - Part 13: Aggregates (IEC 62541-13:2020)
OPC Unified Architecture - Teil 13: Aggregation von Daten (IEC 62541-13:2020)
Architecture unifiée OPC - Partie 13: Agrégats (IEC 62541-13:2020)
Ta slovenski standard je istoveten z: EN IEC 62541-13:2020
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN IEC 62541-13:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62541-13:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 62541-13:2020


EUROPEAN STANDARD EN IEC 62541-13

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2020
ICS 35.100.05; 25.040.40 Supersedes EN 62541-13:2015 and all of its
amendments and corrigenda (if any)
English Version
OPC Unified Architecture - Part 13: Aggregates
(IEC 62541-13:2020)
Architecture unifiée OPC - Partie 13: Agrégats OPC Unified Architecture - Teil 13: Aggregation von Daten
(IEC 62541-13:2020) (IEC 62541-13:2020)
This European Standard was approved by CENELEC on 2020-07-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62541-13:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62541-13:2020
EN IEC 62541-13:2020 (E)

European foreword
The text of document 65E/697/FDIS, future edition 2 of IEC 62541-13, prepared by SC 65E "Devices
and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 62541-13:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-04-16
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-07-16
document have to be withdrawn

This document supersedes EN 62541-13:2015 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 62541-13:2020 was approved by CENELEC as a European
Standard without any modification.


2

---------------------- Page: 4 ----------------------
SIST EN IEC 62541-13:2020
EN IEC 62541-13:2020 (E)

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions
...