EN 62065:2014
(Main)Maritime navigation and radiocommunication equipment and systems - Track control systems - Operational and performance requirements, methods of testing and required test results
Maritime navigation and radiocommunication equipment and systems - Track control systems - Operational and performance requirements, methods of testing and required test results
IEC 62065:2014(E) specifies the minimum operational and performance requirements, methods of testing and required test results conforming to performance standards adopted by the IMO in resolution MSC.74(69) Annex 2 Recommendation on Performance Standards for Track Control Systems. In addition, it takes into account IMO resolution A.694(17) to which IEC 60945 is associated. When a requirement of this standard is different from IEC 60945, the requirement in this standard takes precedence. Also it takes into account IMO resolution MSC.302(87) on bridge alert management (BAM). This second edition cancels and replaces the first edition published in 2002 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - alarms and warnings have been brought into line with the requirements for Bridge Alert Management; - requirements for the category B system have been revised; - the parameters of the ship models of Annex I have been adjusted to resemble more Newtonian-like behaviour and the tidal current has been modelled; - a new Annex K has been added with interface requirements.
Navigations- und Funkkommunikationsgeräte und -systeme für die Seeschifffahrt - Bahnregelungssysteme - Betriebs- und Leistungsanforderungen, Prüfverfahren und geforderte Prüfergebnisse
Matériels et systèmes de navigation et de radiocommunication maritimes - Systèmes de contrôle de route - Exigences opérationnelles et de fonctionnement, méthodes d'essais et résultats exigés
L'IEC 62065:2014 spécifie les exigences opérationnelles et de fonctionnement minimales, les méthodes d'essai et les résultats d'essai exigibles conformément aux normes de performances adoptées dans la Résolution MSC.74(69) Annexe 2 de l'OMI, Recommandation sur les normes de fonctionnement des systèmes de contrôle de la route. De plus, elle tient compte de la Résolution A.694(17) de l'OMI à laquelle est associée l'IEC 60945. Si une exigence de la présente norme diffère de l'IEC 60945, l'exigence de la présente norme prévaut. Elle prend également en compte la résolution MSC.302(87) sur la gestion des alertes à la passerelle de l'OMI. Cette deuxième édition annule et remplace la première édition publiée en 2002 et constitue une révision technique. Cette édition inclut les principales modifications techniques suivantes par rapport à l'édition précédente: - les alarmes et mises en garde ont été mis en correspondance avec les exigences relatives à la gestion des alertes à la passerelle; - les exigences pour le système de catégorie B ont été révisées; - les paramètres des modèles de navire de l'Annexe I ont été ajustés afin de ressembler à un comportement newtonien plus fidèle et le courant de marée a été modélisé; - une nouvelle Annexe K a été ajoutée avec des exigences d'interface.
Pomorska plovba ter radiokomunikacijski sistemi in oprema - Sistemi za nadzor spremljanja - Obratovalne in zmogljivostne zahteve, preskusne metode in zahtevani rezultati preskušanja (IEC 62065:2014)
EN IEC 62065 določa minimalne operativne in izvedbene zahteve, preskusne metode in pričakovane rezultate preskušanja v skladu z izvedbenimi standardi, ki jih je sprejela Mednarodna pomorska organizacija v dodatku 2 k resoluciji MSC.74(69), Priporočilo o standardih delovanja za sisteme za nadzor spremljanja. Poleg tega je upoštevana resolucija Mednarodne pomorske organizacije A.694(17), s katero je povezan standard IEC 60945. Če se zahteva iz tega standarda razlikuje od zahteve iz standarda IEC 60945, ima prednost zahteva iz tega standarda. Prav tako upošteva resolucijo Mednarodne pomorske organizacije MSC.302(87) o upravljanju opozoril mostu (BAM).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62065:2014
01-julij-2014
1DGRPHãþD
SIST EN 62065:2004
Pomorska plovba ter radiokomunikacijski sistemi in oprema - Sistemi za nadzor
spremljanja - Obratovalne in zmogljivostne zahteve, preskusne metode in
zahtevani rezultati preskušanja (IEC 62065:2014)
Maritime navigation and radiocommunication equipment and systems - Track control
systems - Operational and performance requirements, methods of testing and required
test results
Ta slovenski standard je istoveten z: EN 62065:2014
ICS:
47.020.70 Navigacijska in krmilna Navigation and control
oprema equipment
SIST EN 62065:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62065:2014
---------------------- Page: 2 ----------------------
SIST EN 62065:2014
EUROPEAN STANDARD EN 62065
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2014
ICS 47.020.70 Supersedes EN 62065:2002
English Version
Maritime navigation and radiocommunication equipment and
systems - Track control systems - Operational and performance
requirements, methods of testing and required test results
(IEC 62065:2014)
Matériels et systèmes de navigation et de Navigations- und Funkkommunikationsgeräte und -systeme
radiocommunication maritimes - Systèmes de contrôle de für die Seeschifffahrt - Bahnregelungssysteme - Betriebs-
route - Exigences opérationnelles et de fonctionnement, und Leistungsanforderungen, Prüfverfahren und geforderte
méthodes d'essais et résultats exigés Prüfergebnisse
(CEI 62065:2014) (IEC 62065:2014)
This European Standard was approved by CENELEC on 2014-03-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62065:2014 E
---------------------- Page: 3 ----------------------
SIST EN 62065:2014
EN 62065:2014 - 2 -
Foreword
The text of document 80/716/FDIS, future edition 2 of IEC 62065, prepared by IEC/TC 80 "Maritime
navigation and radiocommunication equipment and systems" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 62065:2014.
The following dates are fixed:
(dop) 2014-12-13
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-03-13
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62065:2002.
EN 62065:2014 includes the following significant technical changes with respect to EN 62065:2002:
– alarms and warnings have been brought into line with the requirements for Bridge Alert
Management;
– requirements for the category B system have been revised;
– the parameters of the ship models of Annex I have been adjusted to resemble more Newtonian-like
behaviour and the tidal current has been modelled;
– a new Annex K has been added with interface requirements.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62065:2014 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61108-4 NOTE Harmonized as EN 61108-4.
IEC 61162-3 NOTE Harmonized as EN 61162-3.
ISO 9000 NOTE Harmonized as EN ISO 9000.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.