Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety

IEC 62282-3-100:2019 is available as IEC 62282-3-100:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62282-3-100:2019 applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions. This document is applicable to stationary fuel cell power systems intended for indoor and outdoor commercial, industrial and residential use in non-hazardous areas. This second edition cancels and replaces the first edition published in 2012. This edition includes the following significant technical changes with respect to the previous edition: a) recognition that fuel carrying components qualified to leakage standards (soundness) need not be considered as potential flammable leak sources; b) new annex for small power systems; and c) clarifications for numerous requirements and tests

Brennstoffzellentechnologien - Teil 3-100: Stationäre Brennstoffzellen-Energiesysteme - Sicherheit

Technologies des piles à combustible - Partie 3-100: Systèmes à piles à combustible stationnaires - Sécurité

IEC 62282-3-100:2019 est disponible sous forme de IEC 62282-3-100:2019 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L’IEC 62282-3-100:2019 s’applique aux systèmes à piles à combustible autonomes assemblés pour être stationnaires ou aux systèmes à piles à combustible d’un ensemble assemblé en usine de systèmes intégrés qui génèrent de l’électricité par réactions électrochimiques. Le présent document s’applique aux systèmes à piles à combustibles stationnaires destinés à un usage à l'intérieur et à l'extérieur, commercial, industriel ou d'habitation, dans des zones non dangereuses. Cette deuxième édition annule et remplace la première édition parue en 2012. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) il n’est pas nécessaire de tenir compte des composants transportant le combustible qui sont qualifiés par rapport aux normes de fuite (intégrité) comme des sources potentielles de fuites inflammables; b) nouvelle annexe relative aux petits systèmes à piles à combustible; et c) éclaircissements relatifs à de nombreux essais et exigences.

Tehnologije gorivnih celic - 3-100. del: Nepremični elektroenergetski sistemi z gorivnimi celicami - Varnost (IEC 62282-3-100:2019)

General Information

Status
Published
Publication Date
09-Apr-2020
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
10-Apr-2020
Completion Date
10-Apr-2020

Relations

Buy Standard

Standard
EN IEC 62282-3-100:2020 - BARVE
English language
87 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62282-3-100:2020
01-junij-2020
Nadomešča:
SIST EN 62282-3-100:2012
Tehnologije gorivnih celic - 3-100. del: Nepremični elektroenergetski sistemi z
gorivnimi celicami - Varnost (IEC 62282-3-100:2019)
Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety (IEC
62282-3-100:2019)
Brennstoffzellentechnologien - Teil 3-100: Stationäre Brennstoffzellen-Energiesysteme -
Sicherheit (IEC 62282-3-100:2019)
Technologies des piles à combustible - Partie 3-100: Systèmes à piles à combustible
stationnaires - Sécurité (IEC 62282-3-100:2019)
Ta slovenski standard je istoveten z: EN IEC 62282-3-100:2020
ICS:
27.070 Gorilne celice Fuel cells
SIST EN IEC 62282-3-100:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62282-3-100:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 62282-3-100:2020


EUROPEAN STANDARD EN IEC 62282-3-100

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2020
ICS 27.070 Supersedes EN 62282-3-100:2012 and all of its
amendments and corrigenda (if any)
English Version
Fuel cell technologies - Part 3-100: Stationary fuel cell power
systems - Safety
(IEC 62282-3-100:2019)
Technologies des piles à combustible - Partie 3-100: Brennstoffzellentechnologien - Teil 3-100: Stationäre
Systèmes à piles à combustible stationnaires - Sécurité Brennstoffzellen-Energiesysteme - Sicherheit
(IEC 62282-3-100:2019) (IEC 62282-3-100:2019)
This European Standard was approved by CENELEC on 2019-03-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62282-3-100:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62282-3-100:2020
EN IEC 62282-3-100:2020 (E)
European foreword
The text of document 105/695/FDIS, future edition 2 of IEC 62282-3-100, prepared by IEC/TC 105
"Fuel cell technologies" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
as EN IEC 62282-3-100:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-10-10
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-04-10
document have to be withdrawn

This document supersedes EN 62282-3-100:2012 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62282-3-100:2019 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60079-20-1 NOTE Harmonized as EN 60079-20-1
IEC 60812 NOTE Harmonized as EN IEC 60812
IEC 61025 NOTE Harmonized as EN 61025

2

---------------------- Page: 4 ----------------------
SIST EN IEC 62282-3-100:2020
EN IEC 62282-3-100:2020 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.