EN 12258-3:2003
(Main)Aluminium and aluminium alloys - Terms and definitions - Part 3: Scrap
Aluminium and aluminium alloys - Terms and definitions - Part 3: Scrap
This part of EN 302 specifies a method for determining the resistance to delamination of bonded joints.
It is suitable for the following applications:
a) for assessing the compliance of adhesives with prEN 301;
b) for assessing the suitability and quality of adhesives for load-bearing timber structures;
c) for comparing the effects on the bond strength resulting from the choice of bonding conditions, from different climatic conditioning and from the treatment of the test pieces before and after bonding.
This test is intended primarily to obtain performance data for the classification of adhesives for load-bearing timber structures according to their suitability for use in defined climatic environments.
This method is not intended for use to provide numerical design data and does not necessarily represent the performance of the bonded member in service. It is not intended to be used to assess the suitability of adhesives for the manufacture of wood-based panels.
Aluminium und Aluminiumlegierungen - Begriffe - Teil 3: Schrott
Aluminium et alliages d'aluminium - Termes et définitions - Partie 3: Scrap (matières premières pour recyclage)
Aluminium and aluminium alloys - Terms and definitions - Part 3: Scrap
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium and aluminium alloys - Terms and definitions - Part 3: ScrapAluminium und Aluminiumlegierungen - Begriffe - Teil 3: SchrottAluminium et alliages d'aluminium - Termes et définitions - Partie 3: Scrap (matieres premieres pour recyclage)Aluminium and aluminium alloys - Terms and definitions - Part 3: Scrap77.120.10Aluminij in aluminijeve zlitineAluminium and aluminium alloys01.040.77Metalurgija (Slovarji)Metallurgy (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 12258-3:2003SIST EN 12258-3:2004en,fr,de01-junij-2004SIST EN 12258-3:2004SLOVENSKI
STANDARD
SIST EN 12258-3:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12258-3September 2003ICS 01.040.13; 01.040.77; 13.030.50; 77.120.10English versionAluminium and aluminium alloys - Terms and definitions - Part 3:ScrapAluminium et alliages d'aluminium - Termes et définitions -Partie 3: Scrap (matières premières pour recyclage)Aluminium und Aluminiumlegierungen - Begriffe - Teil 3:SchrottThis European Standard was approved by CEN on 3 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12258-3:2003 ESIST EN 12258-3:2004
NORME EUROPÉENNEEUROPÄISCHE NORMEUROPEAN STANDARDEN 12258-3Septembre 2003ICS 01.040.13; 01.040.77; 13.030.50; 77.120.10Version FrançaiseAluminium et alliages d'aluminium - Termes et définitions -Partie 3: Scrap (matières premières pour recyclage)Aluminium und Aluminiumlegierungen - Begriffe - Teil 3:SchrottAluminium and aluminium alloys - Terms and definitions -Part 3: ScrapLa présente Norme européenne a été adoptée par le CEN le 3 mars 2003.Les membres du CEN sont tenus de se soumettre au Règlement Intérieur du CEN/CENELEC, qui définit les conditions dans lesquellesdoit être attribué, sans modification, le statut de norme nationale à la Norme européenne. Les listes mises à jour et les référencesbibliographiques relatives à ces normes nationales peuvent être obtenues auprès du Centre de Gestion ou auprès des membres du CEN.La présente Norme européenne existe en trois versions officielles (allemand, anglais, français). Une version dans une autre langue faitepar traduction sous la responsabilité d'un membre du CEN dans sa langue nationale et notifiée au Centre de Gestion, a le même statut queles versions officielles.Les membres du CEN sont les organismes nationaux de normalisation des pays suivants: Allemagne, Autriche, Belgique, Danemark,Espagne, Finlande, France, Grèce, Hongrie, Irlande, Islande, Italie, Luxembourg, Malte, Norvège, Pays-Bas, Portugal, RépubliqueTchèque, Royaume-Uni, Slovaquie, Suède et Suisse.COMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGEUROPEAN COMMITTEE FOR STANDARDIZATIONCentre de Gestion: rue de Stassart, 36
B-1050 Bruxelles© 2003 CENTous droits d'exploitation sous quelque forme et de quelque manière quece soit réservés dans le monde entier aux membres nationaux du CEN.Réf. n° EN 12258-3:2003 FSIST EN 12258-3:2004
EUROPÄISCHE NORMEUROPEAN STANDARDNORME EUROPÉENNEEN 12258-3September 2003ICS 01.040.13; 01.040.77; 13.030.50; 77.120.10Deutsche FassungAluminium und Aluminiumlegierungen - Begriffe - Teil 3: SchrottAluminium and aluminium alloys - Terms and definitions -Part 3: ScrapAluminium et alliages d'aluminium - Termes et définitions -Partie 3: Scrap (matières premières pour recyclage)Diese Europäische Norm wurde vom CEN am 3.März 2003 angenommen.Die CEN-Mitglieder sind gehalten, die CEN/CENELEC-Geschäftsordnung zu erfüllen, in der die Bedingungen festgelegt sind, unter denendieser Europäischen Norm ohne jede Änderung der Status einer nationalen Norm zu geben ist. Auf dem letzen Stand befindliche Listendieser nationalen Normen mit ihren bibliographischen Angaben sind beim Management-Zentrum oder bei jedem CEN-Mitglied auf Anfrageerhältlich.Diese Europäis
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.