EN ISO 10715:2022
(Main)Natural gas - Gas sampling (ISO 10715:2022)
Natural gas - Gas sampling (ISO 10715:2022)
This document gives means for ensuring that samples of natural gas and natural gas substitutes that are conveyed into transmission and distribution grids are representative of the mass to which they are allocated.
NOTE To ensure that a particular gas is taken into account in the standard, please see Annex A.
This document is applicable for sampling at sites and locations where interchangeability criteria, energy content and network entry conditions are measured and monitored and is particularly relevant at cross border and fiscal measurement stations. It serves as an important source for control applications in natural gas processing and the measurement of trace components.
This document is applicable to natural dry gas (single phase - typically gas transiting through natural gas pipelines) sampling only. On occasion a natural gas flow can have entrained liquid hydrocarbons. Attempting to sample a wet natural gas flow introduces the possibility of extra unspecified uncertainties in the resulting flow composition analysis. Sampling a wet gas (two or three phases) flow is outside the scope of this document.
This document does not apply to the safety issues associated with gas sampling.
Erdgas - Probenahme (ISO 10715:2022)
Dieses Dokument enthält Mittel, mit denen sichergestellt wird, dass Proben von Erdgas und Erdgasaustauschgas, das in Fernleitungs- und Verteilungsnetze geleitet wird, repräsentativ für den Gasstrom sind, dem sie zugeordnet sind.
ANMERKUNG Um sicherzustellen, dass ein bestimmtes Gas in der Norm Berücksichtigung findet, siehe Anhang A.
Dieses Dokument ist für die Probenahme an Standorten und Stellen anwendbar, an denen Austauschbarkeitskriterien, Energiegehalt und Netzeinspeisebedingungen gemessen und überwacht werden, und ist insbesondere an grenzüberschreitenden und abrechnungsrelevanten Messstellen maßgebend. Es dient als wichtige Quelle für Kontrollanwendungen in der Erdgasverarbeitung und für die Messung von Spurenbestandteilen.
Dieses Dokument ist nur für die Probenahme von trockenem Erdgas (einphasig — üblicherweise Gas, das durch Erdgasleitungen fließt) anwendbar. Gelegentlich kann ein Erdgasfluss mitgenommene flüssige Kohlenwasserstoffe enthalten. Der Versuch, einen feuchten Erdgasfluss zu beproben, führt möglicherweise zu zusätzlichen, nicht spezifizierten Unsicherheiten bei der Analyse der resultierenden Gasflusszusammensetzung. Die Probenahme aus einem feuchten Gasfluss (zwei- oder dreiphasig) liegt nicht im Anwendungsbereich dieses Dokuments.
Dieses Dokument ist nicht für die Sicherheitsfragen in Zusammenhang mit der Gasprobenahme anwendbar.
WARNUNG — Allgemeine Aspekte der Erdgasbeschaffenheit sind in ISO 13686 [1] ausführlich beschrieben. Möglicherweise deckt die Norm nicht alle Spurenbestandteile ab, deren Überwachung aus verschiedenen Gründen zunehmend notwendig ist.
Gaz naturel - Échantillonnage de gaz (ISO 10715:2022)
Zemeljski plin - Vzorčenje (ISO 10715:2022)
Ta dokument določa sredstva za zagotavljanje, da so vzorci zemeljskega plina in nadomestkov zemeljskega plina, ki se prenašajo v prenosna in distribucijska omrežja, reprezentativni za maso, ki so ji dodeljeni. OPOMBA: Ali je določen plin upoštevan v standardu, je mogoče preveriti v dodatku A. Ta dokument se uporablja za vzorčenje na mestih in lokacijah, kjer se merijo in spremljajo merila medsebojne zamenljivosti, vsebnost energije ter vstopni pogoji za omrežje. Še posebej je pomemben pri čezmejnih postajah in sistemih fiskalnega merjenja. Je pomemben vir za izvajanje nadzora pri predelavi zemeljskega plina in merjenju komponent v sledovih. Dokument se uporablja samo za vzorčenje suhega zemeljskega plina (enofaznega – običajno plina, ki teče po plinovodih za zemeljski plin). Zgodi se, da tok zemeljskega plina vsebuje tekoče ogljikovodike. Pri poskusu vzorčenja toka mokrega zemeljskega plina in analizi njegove sestave lahko pride do dodatnih nedefiniranih negotovosti. Vzorčenje toka mokrega plina (dvo- ali trifazni) ne spada na področje uporabe tega dokumenta. Dokument se ne navezuje na varnostna vprašanja, povezana z vzorčenjem plina.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10715:2023
01-januar-2023
Nadomešča:
SIST EN ISO 10715:2000
Zemeljski plin - Vzorčenje (ISO 10715:2022)
Natural gas - Gas sampling (ISO 10715:2022)
Erdgas - Probenahme (ISO 10715:2022)
Gaz naturel - Échantillonnage de gaz (ISO 10715:2022)
Ta slovenski standard je istoveten z: EN ISO 10715:2022
ICS:
75.060 Zemeljski plin Natural gas
SIST EN ISO 10715:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10715:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 10715:2023
EN ISO 10715
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2022
EUROPÄISCHE NORM
ICS 75.060 Supersedes EN ISO 10715:2000
English Version
Natural gas - Gas sampling (ISO 10715:2022)
Gaz naturel - Échantillonnage de gaz (ISO 10715:2022) Erdgas - Probenahme (ISO 10715:2022)
This European Standard was approved by CEN on 7 July 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10715:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10715:2023
EN ISO 10715:2022 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10715:2023
EN ISO 10715:2022 (E)
European foreword
This document (EN ISO 10715:2022) has been prepared by Technical Committee ISO/TC 193 "Natural
gas" in collaboration with Technical Committee CEN/TC 238 “Test gases, test pressures, appliance
categories and gas appliance types” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2023, and conflicting national standards shall be
withdrawn at the latest by April 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10715:2000.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 10715:2022 has been approved by CEN as EN ISO 10715:2022 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 10715:2023
---------------------- Page: 6 ----------------------
SIST EN ISO 10715:2023
INTERNATIONAL ISO
STANDARD 10715
Second edition
2022-10
Natural gas — Gas sampling
Gaz naturel — Échantillonnage de gaz
Reference number
ISO 10715:2022(E)
© ISO 2022
---------------------- Page: 7 ----------------------
SIST EN ISO 10715:2023
ISO 10715:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in th
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.