Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design

This European Standard specifies dimensions and design requirements of mobile waste and recycling containers with 4 wheels, with flat lid(s) and capacity up to 1 700 l to be used by wide trunnion or BG-lifting device and/or wide comb lifting device.

Fahrbare Abfall- und Wertstoffbehälter - Teil 4: Behälter mit 4 Rädern und einem Nennvolumen bis 1 700 l mit Flachdeckel(n), für breite Schüttungen mit Zapfenaufnahme oder BG-Schüttungen und/oder für breite Kammschüttungen - Maße und Formgebung

Dieses Dokument legt Maße und Anforderungen an die Gestaltung von fahrbaren Abfall- und Wertstoffbehältern mit 4 Rädern, mit Flachdeckel(n) und einem Nennvolumen bis 1 700 l für breite Schüttungen für Zapfenaufnahme oder BG-Schüttungen und/oder breite Kammschüttungen fest.
Diese Behälter sind nur für die vorstehend ausdrücklich benannten Schüttungen zugelassen.

Conteneurs roulants à déchets et de recyclage - Partie 4 : Conteneurs à 4 roues de capacité inférieure ou égale à 1 700 l à couvercle(s) plat(s), pour lève-conteneurs par tourillon large ou basculeurs et/ou lève conteneurs à peigne large - Dimensions et conception

Le présent document spécifie les dimensions et les exigences de conception pour les conteneurs roulants à déchets et de recyclage à 4 roues, à couvercle(s) plat(s) dont la capacité est inférieure ou égale à 1 700 l, pour lève-conteneurs par tourillon large ou basculeurs et/ou lève-conteneurs à peigne large.
Ces conteneurs sont uniquement approuvés pour les lève-conteneurs explicitement mentionnés ci dessus.

Premični zabojniki za odpadke in za recikliranje - 4. del: Zabojniki na štirih kolesih s prostornino do 1700 l in ravnim(-i) pokrovom(-i) za široke iztresalnike z rokama ali BG in/ali glavnikom - Mere in oblika

General Information

Status
Published
Publication Date
07-Apr-2020
Withdrawal Date
30-Oct-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
08-Apr-2020
Due Date
16-Dec-2019
Completion Date
08-Apr-2020

Relations

Buy Standard

Standard
EN 840-4:2020
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 840-4:2018
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 840-4:2020
01-junij-2020
Nadomešča:
SIST EN 840-4:2014
Premični zabojniki za odpadke in za recikliranje - 4. del: Zabojniki na štirih kolesih
s prostornino do 1700 l in ravnim(-i) pokrovom(-i) za široke iztresalnike z rokama
ali BG in/ali glavnikom - Mere in oblika
Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity
up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices -
Dimensions and design
Fahrbare Abfall- und Wertstoffbehälter - Teil 4: Behälter mit 4 Rädern und einem
Nennvolumen bis 1 700 l mit Flachdeckel(n), für breite Schüttungen mit Zapfenaufnahme
oder BG-Schüttungen und/oder für breite Kammschüttungen - Maße und Formgebung
Conteneurs roulants à déchets et de recyclage - Partie 4 : Conteneurs à 4 roues de
capacité inférieure ou égale à 1 700 l à couvercle(s) plat(s), pour lève-conteneurs par
tourillon large ou basculeurs et/ou lève-conteneurs à peigne large - Dimensions et
conception
Ta slovenski standard je istoveten z: EN 840-4:2020
ICS:
13.030.40 Naprave in oprema za Installations and equipment
odstranjevanje in obdelavo for waste disposal and
odpadkov treatment
SIST EN 840-4:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 840-4:2020

---------------------- Page: 2 ----------------------
SIST EN 840-4:2020


EN 840-4
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2020
EUROPÄISCHE NORM
ICS 13.030.40 Supersedes EN 840-4:2012
English Version

Mobile waste and recycling containers - Part 4: Containers
with 4 wheels with a capacity up to 1 700 l with flat lid(s),
for wide trunnion or BG- and/or wide comb lifting devices
- Dimensions and design
Conteneurs roulants à déchets et de recyclage - Partie 4 Fahrbare Abfall- und Wertstoffbehälter - Teil 4:
: Conteneurs à 4 roues de capacité inférieure ou égale à Behälter mit 4 Rädern und einem Nennvolumen bis 1
1 700 l à couvercle(s) plat(s), pour lève-conteneurs par 700 l mit Flachdeckel(n), für breite Schüttungen mit
tourillon large ou basculeurs et/ou lève conteneurs à Zapfenaufnahme oder BG-Schüttungen und/oder für
peigne large - Dimensions et conception breite Kammschüttungen - Maße und Formgebung
This European Standard was approved by CEN on 7 October 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 840-4:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 840-4:2020
EN 840-4:2020 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Volumes . 5
5 Dimensions and design . 6
6 Nominal mass .
...

SLOVENSKI STANDARD
oSIST prEN 840-4:2018
01-september-2018
3UHPLþQL]DERMQLNL]DRGSDGNHLQ]DUHFLNOLUDQMHGHO=DERMQLNLQDãWLULKNROHVLK
VSURVWRUQLQRGROLQUDYQLP L SRNURYRP L ]DãLURNHL]WUHVDOQLNH]URNDPD
DOL%*LQDOLJODYQLNRP0HUHLQREOLND
Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity
up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices -
Dimensions and design
Fahrbare Abfall- und Wertstoffbehälter - Teil 4: Behälter mit 4 Rädern und einem
Nennvolumen bis 1 700 l mit Flachdeckel(n), für breite Schüttungen mit Zapfenaufnahme
oder BG-Schüttungen und/oder für breite Kammschüttungen - Maße und Formgebung
Conteneurs roulants à déchets et de recyclage - Partie 4 : Conteneurs à 4 roues de
capacité inférieure ou égale à 1 700 l à couvercle(s) plat(s), pour lève-conteneurs par
tourillon large ou basculeurs et/ou lève-conteneurs à peigne large - Dimensions et
conception
Ta slovenski standard je istoveten z: prEN 840-4
ICS:
13.030.40 Naprave in oprema za Installations and equipment
odstranjevanje in obdelavo for waste disposal and
odpadkov treatment
oSIST prEN 840-4:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 840-4:2018

---------------------- Page: 2 ----------------------
oSIST prEN 840-4:2018


DRAFT
EUROPEAN STANDARD
prEN 840-4
NORME EUROPÉENNE

EUROPÄISCHE NORM

July 2018
ICS 13.030.40 Will supersede EN 840-4:2012
English Version

Mobile waste and recycling containers - Part 4: Containers
with 4 wheels with a capacity up to 1 700 l with flat lid(s),
for wide trunnion or BG- and/or wide comb lifting devices
- Dimensions and design
Conteneurs roulants à déchets et de recyclage - Partie 4 Fahrbare Abfall- und Wertstoffbehälter - Teil 4:
: Conteneurs à 4 roues de capacité inférieure ou égale à Behälter mit 4 Rädern und einem Nennvolumen bis 1
1 700 l à couvercle(s) plat(s), pour lève-conteneurs par 700 l mit Flachdeckel(n), für breite Schüttungen mit
tourillon large ou basculeurs et/ou lève-conteneurs à Zapfenaufnahme oder BG-Schüttungen und/oder für
peigne large - Dimensions et conception breite Kammschüttungen - Maße und Formgebung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 183.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 840-4:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 840-4:2018
prEN 840-4:2018 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Volumes .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.