EN 13600:2021
(Main)Copper and copper alloys - Seamless copper tubes for electrical purposes
Copper and copper alloys - Seamless copper tubes for electrical purposes
This document specifies the composition, property requirements including electrical properties, and tolerances on dimensions and form for seamless drawn copper tubes for electrical purposes, delivered in straight lengths or alternatively in level wound coils with the cross-sections and size ranges below:
- for round tubes in straight lengths with outside diameters from 3 mm up to and including 450 mm and wall thicknesses from 0,3 mm up to and including 10 mm;
- for round tubes in level wound coils with outside diameters from 3 mm up to and including 30 mm and wall thicknesses from 0,3 mm up to and including 10 mm;
- for square and rectangular tubes with major outside dimension from 5 mm up to and including 150 mm and wall thicknesses from 0,5 mm up to and including 10 mm.
The sampling procedures and test methods for verification of conformity to the requirements of this document are also specified.
Kupfer und Kupferlegierungen - Nahtlose Rohre aus Kupfer für die Anwendung in der Elektrotechnik
Dieses Dokument legt die Zusammensetzung, die Anforderungen an die Eigenschaften einschließlich elektrischer Eigenschaften, Grenzabmaße und Formtoleranzen für nahtlose Kupferrohre für die Elektro-technik fest, die in geraden Längen oder alternativ in gespulten Ringen mit folgenden Querschnitten und Größenbereichen geliefert werden:
- für Rundrohre in geraden Längen mit Außendurchmessern von 3 mm bis 450 mm und Wanddicken von 0,3 mm bis 10 mm;
- für Rundrohre in gespulten Ringen mit Außendurchmessern von 3 mm bis 30 mm und Wanddicken von 0,3 mm bis 10 mm;
- für quadratische und rechteckige Rohre mit den größten Außenmaßen von 5 mm bis 150 mm und Wanddicken von 0,5 mm bis 10 mm.
Der Ablauf der Probenentnahme und die Prüfverfahren zur Feststellung der Übereinstimmung mit den Anforderungen dieses Dokuments sind ebenfalls festgelegt.
Cuivre et alliages de cuivre - Tubes sans soudure en cuivre pour usages électriques
Le présent document spécifie la composition, les caractéristiques, y compris les caractéristiques électriques, et les tolérances de dimensions et de forme des tubes étirés sans soudure en cuivre pour usages électriques fournis en longueurs droites ou en bobines trancannées, de coupes transversales et de dimensions suivantes :
- pour les tubes ronds en longueurs droites de diamètres extérieurs compris entre 3 mm et 450 mm inclus et d'épaisseurs de paroi comprises entre 0,3 mm et 10 mm inclus ;
- pour les tubes ronds en bobines trancannées de diamètres extérieurs compris entre 3 mm et 30 mm inclus et d'épaisseurs de paroi comprises entre 0,3 mm et 10 mm inclus ;
- pour les tubes carrés et rectangulaires de dimensions extérieures principales comprises entre 5 mm et 150 mm inclus et d'épaisseurs de paroi comprises entre 0,5 mm et 10 mm inclus.
Les procédures d'échantillonnage et les méthodes d'essai pour la vérification de la conformité aux exigences du présent document sont également spécifiées.
Baker in bakrove zlitine - Nevarjene bakrene cevi za uporabo v elektrotehniki
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13600:2021
01-julij-2021
Nadomešča:
SIST EN 13600:2013
Baker in bakrove zlitine - Nevarjene bakrene cevi za uporabo v elektrotehniki
Copper and copper alloys - Seamless copper tubes for electrical purposes
Kupfer und Kupferlegierungen - Nahtlose Rohre aus Kupfer für die Anwendung in der
Elektrotechnik
Cuivre et alliages de cuivre - Tubes sans soudure en cuivre pour usages électriques
Ta slovenski standard je istoveten z: EN 13600:2021
ICS:
77.150.30 Bakreni izdelki Copper products
SIST EN 13600:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13600:2021
---------------------- Page: 2 ----------------------
SIST EN 13600:2021
EN 13600
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2021
EUROPÄISCHE NORM
ICS 77.150.30 Supersedes EN 13600:2013
English Version
Copper and copper alloys - Seamless copper tubes for
electrical purposes
Cuivre et alliages de cuivre - Tubes sans soudure en Kupfer und Kupferlegierungen - Nahtlose Rohre aus
cuivre pour usages électriques Kupfer für die Anwendung in der Elektrotechnik
This European Standard was approved by CEN on 5 March 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13600:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13600:2021
EN 13600:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Designations. 5
4.1 Material . 5
4.1.1 General . 5
4.1.2 Symbol . 5
4.1.3 Number . 5
4.2 Material condition . 5
4.3 Product . 6
5 Ordering information . 7
6 Requirements .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.