EN ISO 1:2022
(Main)Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2022)
Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2022)
This document defines the concepts of a reference temperature and the standard reference temperature and specifies the standard reference temperature value for the specification of geometrical and dimensional properties of an object. Some examples of geometrical and dimensional properties include size, location, orientation (including angle), form and surface texture of a workpiece.
This document is also applicable to the definition of the measurand used in verification or calibration.
Geometrische Produktspezifikation (GPS) - Standardreferenztemperatur für die Spezifikation der geometrischen und maßlichen Eigenschaften (ISO 1:2022)
Dieses Dokument definiert die Konzepte einer Referenztemperatur und der Standardreferenztemperatur und legt den Wert für die Standardreferenztemperatur für die Spezifikation von geometrischen und maßlichen Eigenschaften eines Objekts fest. Einige Beispiele von geometrischen und maßlichen Eigen¬schaften umfassen Größe, Ort, Richtung (einschließlich Winkel), Form und Oberflächenbeschaffenheit eines Werkstücks.
Dieses Dokument ist auch anwendbar für die Definition der Messgröße, die in der Verifikation oder Kalibrierung verwendet wird.
Spécification géométrique des produits (GPS) - Température normale de référence pour la spécification des propriétés géométriques et dimensionnelles (ISO 1:2022)
Le présent document définit les concepts de température de référence et la température normale de référence, et spécifie la valeur de la température normale de référence pour la spécification des propriétés géométriques et dimensionnelles d’un objet. Certains exemples de propriétés géométriques et dimensionnelles incluent la taille, la position, l’orientation (y compris l’angle), la forme et l’état de surface d’une pièce.
Le présent document s’applique aussi à la définition du mesurande utilisé en vérification ou en étalonnage.
Specifikacije geometrijskih veličin izdelka (GPS) - Standardna referenčna temperatura za specifikacijo geometrijskih in dimenzijskih lastnosti (ISO 1:2022)
Ta dokument opredeljuje koncepte referenčne temperature in standardne referenčne temperature ter določa vrednost standardne referenčne temperature za specifikacijo geometrijskih in dimenzijskih lastnosti predmeta. Nekateri primeri geometrijskih in dimenzijskih lastnosti vključujejo velikost, lokacijo, usmerjenost (vključno s kotom), obliko in površinsko strukturo obdelovanca.
Ta dokument se uporablja tudi za opredelitev merjene veličine, ki se uporablja pri overjanju ali umerjanju.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 1:2022
01-september-2022
Nadomešča:
SIST EN ISO 1:2016
Specifikacije geometrijskih veličin izdelka (GPS) - Standardna referenčna
temperatura za specifikacijo geometrijskih in dimenzijskih lastnosti (ISO 1:2022)
Geometrical product specifications (GPS) - Standard reference temperature for the
specification of geometrical and dimensional properties (ISO 1:2022)
Geometrische Produktspezifikation (GPS) - Standardreferenztemperatur für die
Spezifikation der geometrischen und maßlichen Eigenschaften (ISO 1:2022)
Spécification géométrique des produits (GPS) - Température normale de référence pour
la spécification des propriétés géométriques et dimensionnelles (ISO 1:2022)
Ta slovenski standard je istoveten z: EN ISO 1:2022
ICS:
17.040.40 Specifikacija geometrijskih Geometrical Product
veličin izdelka (GPS) Specification (GPS)
SIST EN ISO 1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 1:2022
---------------------- Page: 2 ----------------------
SIST EN ISO 1:2022
EN ISO 1
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2022
EUROPÄISCHE NORM
ICS 17.040.01 Supersedes EN ISO 1:2016
English Version
Geometrical product specifications (GPS) - Standard
reference temperature for the specification of geometrical
and dimensional properties (ISO 1:2022)
Spécification géométrique des produits (GPS) - Geometrische Produktspezifikation (GPS) -
Température normale de référence pour la Standardreferenztemperatur für die Spezifikation der
spécification des propriétés géométriques et geometrischen und maßlichen Eigenschaften (ISO
dimensionnelles (ISO 1:2022) 1:2022)
This European Standard was approved by CEN on 19 June 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 1:2022
EN ISO 1:2022 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 1:2022
EN ISO 1:2022 (E)
European foreword
This document (EN ISO 1:2022) has been prepared by Technical Committee ISO/TC 213 "Dimensional
and geometrical product specifications and verification" in collaboration with Technical Committee
CEN/TC 290 “Dimensional and geometrical product specification and verification” the secretariat of
which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2022, and conflicting national standards
shall be withdrawn at the latest by December 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1:2016.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxemb
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.