EN 17323:2020
(Main)Geosynthetics - Determination of tensile properties of Polymeric Geosynthetic Barriers
Geosynthetics - Determination of tensile properties of Polymeric Geosynthetic Barriers
This document specifies test methods for the determination of tensile properties of polymeric geosynthetic barriers PE (e.g. PE-HD and PE-LLD), FPO (e.g. EVA, FPP, and PE-VLD), PVC-P and EPDM.
Method A is suitable for testing polymeric geosynthetic barriers (GBR-P), made of PVC-P, EPDM and FPO (e.g. EVA, FPP and PE-VLD), non-reinforced (including maximum 80gsm glass fleece) and without backing.
Method B is suitable for testing polymeric geosynthetic barriers (GBR-P) made of PE (e.g. PE-HD and PE-LLD), non-reinforced and without backing.
Method C is suitable for testing polymeric geosynthetic barriers (GBR-P), reinforced and/or with backing.
Method D is suitable for measuring modulus (if required) of all non-reinforced GBR-P.
NOTE For homogenous polymers not listed above, method A and D can be used.
Geokunststoffe - Geosynthetische Kunststoffdichtungsbahnen - Bestimmung von Zugeigenschaften
Dieses Dokument legt Prüfverfahren für die Bestimmung von Zugeigenschaften von geosynthetischen Kunststoffdichtungsbahnen aus PE (z. B. PE HD und PE LLD), FPO (z. B. EVA, FPP und PE VLD), PVC P und EPDM fest.
Verfahren A eignet sich für die Prüfung von geosynthetischen Kunststoffdichtungsbahnen (GBR P) aus PVC P, EPDM und FPO (z. B. EVA, FPP und PE VLD), nicht bewehrt (einschließlich höchstens 80 g/m2 Glasvlies) und ohne Kaschierung.
Verfahren B eignet sich für die Prüfung von geosynthetischen Kunststoffdichtungsbahnen (GBR P) aus PE (z. B. PE HD und PE LLD), nicht bewehrt und ohne Kaschierung.
Verfahren C eignet sich für die Prüfung von geosynthetischen Kunststoffdichtungsbahnen (GBR P), bewehrt und/oder mit Kaschierung.
Verfahren D eignet sich für die Messung des Moduls (sofern erforderlich) aller nicht bewehrter GBR P.
ANMERKUNG Für vorstehend nicht aufgeführte homogene Polymere können Verfahren A und D angewendet werden.
Géosynthétiques - Détermination des propriétés en traction des géomembranes polymériques
Ce document traite des méthodes d’essai pour la détermination des propriétés en traction des géomembranes polymériques PE (comme par exemple PE-HD et PE-LLD), FPO (comme par exemple EVA, FPP, et PE-VLD), PVC-P et EPDM.
La méthode A est adaptée à l’essai des géomembranes polymériques (GBR-P) en PVC-P, EPDM et FPO (comme par exemple EVA, FPP et PE-VLD), non renforcées (y compris les voiles de verre 80 g/m2) et sans couche support.
La méthode B est adaptée à l’essai des géomembranes polymériques (GBR-P) constituées de PE (comme par exemple HDPE et PE-LLD), non renforcées et sans couche support.
La méthode C est adaptée à l’essai des géomembranes polymériques (GBR-P) renforcées et/ou avec couche support.
La méthode D est adaptée à la mesure du module (si nécessaire) de tous les produits non renforcés GBR-P.
NOTE Pour les polymères homogènes non cités ci-avant, les méthodes d’essai A et D peuvent être utilisées.
Geosintetika - Ugotavljanje nateznih lastnosti polimernih geosintetičnih ovir
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17323:2020
01-julij-2020
Geosintetika - Ugotavljanje nateznih lastnosti polimernih geosintetičnih ovir
Geosynthetics - Determination of tensile properties of Polymeric Geosynthetic Barriers
Geokunststoffe - Geosynthetische Kunststoffdichtungsbahnen - Bestimmung von
Zugeigenschaften
Géosynthétiques - Détermination des propriétés en traction des géomembranes
polymériques
Ta slovenski standard je istoveten z: EN 17323:2020
ICS:
59.080.70 Geotekstilije Geotextiles
SIST EN 17323:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17323:2020
---------------------- Page: 2 ----------------------
SIST EN 17323:2020
EN 17323
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2020
EUROPÄISCHE NORM
ICS 59.080.70
English Version
Geosynthetics - Determination of tensile properties of
Polymeric Geosynthetic Barriers
Géosynthétiques - Détermination des propriétés en Geokunststoffe - Geosynthetische
traction des géomembranes polymériques Kunststoffdichtungsbahnen - Bestimmung von
Zugeigenschaften
This European Standard was approved by CEN on 14 March 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17323:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17323:2020
EN 17323:2020 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 6
5 Apparatus . 6
6 Test specimens . 7
7 Conditioning . 9
8 Procedure - Method A . 9
9 Procedure - Method B . 10
10 Procedure - Method C . 10
11 Procedure - Method D. 10
12 Calculations and expression of results . 11
13 Precision .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.