Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2018)

This document defines basic terms, symbols, and units of measurement for the field of laser technology in order to unify the terminology and to arrive at clear definitions and reproducible tests of beam parameters and laser-oriented product properties.
NOTE       The laser hierarchical vocabulary laid down in this document differs from that given in IEC 60825?1. ISO and IEC have discussed this difference and agree that it reflects the different purposes for which the two standards serve. For more details, see informative Annex A.

Optik und Photonik - Laser und Laseranlagen - Begriffe und Formelzeichen (ISO 11145:2018)

Dieses Dokument definiert die grundlegenden Begriffe, Formelzeichen und Maßeinheiten für den Bereich der Lasertechnik, um den Sprachgebrauch zu vereinheitlichen und zu klaren Definitionen und reproduzier-baren Prüfungen der Laserparameter und laserbezogenen Produkteigenschaften zu kommen.
ANMERKUNG   Die hierarchisch gegliederte Begriffsbildung für Laser, wie sie in diesem Dokument angegeben ist, unterscheidet sich von der hierarchischen Begriffsbildung in IEC 60825 1. ISO und IEC haben diesen Unterschied beraten und sind übereingekommen, dass sie die beiden verschiedenen Zielsetzungen widerspiegelt, für die die beiden Normen entwickelt wurden. Genaueres ist im informativen Anhang A dargelegt.

Optique et photonique - Lasers et équipements associés aux lasers - Vocabulaire et symboles (ISO 11145:2018)

Le présent document définit les termes fondamentaux, les symboles et les unités de mesure à utiliser dans le domaine de la technologie laser de manière à unifier la terminologie et à établir des définitions claires et des essais reproductibles concernant les paramètres du faisceau et les propriétés des appareils à laser.
NOTE       Le vocabulaire hiérarchique relatif au laser proposé dans le présent document diffère de celui donné dans l'IEC 60825‑1. L'ISO et l'IEC ont discuté de cette différence et sont d'accord qu'elle reflète les divers besoins pour lesquels les deux normes sont nécessaires. Pour plus de détails, voir l'Annexe A informative.

Optika in fotonska tehnologija - Laserji in z laserji povezana oprema - Slovar in simboli (ISO 11145:2018)

Ta dokument določa osnovne izraze, simbole in merske enote za področje laserske tehnologije z namenom poenotenja terminologije ter določitve jasnih definicij in ponovljivih preskusov parametrov za žarke in lasersko usmerjene lastnosti izdelkov.
OPOMBA: Slovar laserske tehnologije v hierarhični obliki, kot je določen v tem dokumentu, se razlikuje od slovarja v standardu IEC 60825–1.
Mednarodna organizacija za standardizacijo (ISO) in Mednarodna komisija za elektroniko (IEC) sta se v razpravi o tej razliki strinjali, da odseva različne namene, za katere se ta dva
standarda uporabljata. Za več podrobnosti glej informativni dodatek A.

General Information

Status
Published
Publication Date
11-Dec-2018
Withdrawal Date
29-Jun-2019
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
12-Dec-2018
Completion Date
12-Dec-2018

Relations

Buy Standard

Standard
EN ISO 11145:2019
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 11145:2017
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11145:2019
01-marec-2019
1DGRPHãþD
SIST EN ISO 11145:2016
Optika in fotonska tehnologija - Laserji in z laserji povezana oprema - Slovar in
simboli (ISO 11145:2018)
Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols
(ISO 11145:2018)
Optik und Photonik - Laser und Laseranlagen - Begriffe und Formelzeichen (ISO
11145:2018)
Optique et photonique - Lasers et équipements associés aux lasers - Vocabulaire et
symboles (ISO 11145:2018)
Ta slovenski standard je istoveten z: EN ISO 11145:2018
ICS:
01.040.31 Elektronika (Slovarji) Electronics (Vocabularies)
01.080.40 *UDILþQLVLPEROL]DXSRUDERY Graphical symbols for use on
ULVEDKGLDJUDPLKQDþUWLKY electrical and electronics
HOHNWURWHKQLNLLQHOHNWURQLNL engineering drawings,
WHUYXVWUH]QLWHKQLþQL diagrams, charts and in
SURL]YRGQLGRNXPHQWDFLML relevant technical product
documentation
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
SIST EN ISO 11145:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11145:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 11145:2019


EN ISO 11145
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2018
EUROPÄISCHE NORM
ICS 01.040.31; 01.080.40; 31.260 Supersedes EN ISO 11145:2016
English Version

Optics and photonics - Lasers and laser-related equipment
- Vocabulary and symbols (ISO 11145:2018)
Optique et photonique - Lasers et équipements Optik und Photonik - Laser und Laseranlagen - Begriffe
associés aux lasers - Vocabulaire et symboles (ISO und Formelzeichen (ISO 11145:2018)
11145:2018)
This European Standard was approved by CEN on 23 September 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11145:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11145:2019
EN ISO 11145:2018 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered . 4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 11145:2019
EN ISO 11145:2018 (E)
European foreword
This document (EN ISO 11145:2018) has been prepared by Technical Committee ISO/TC 172 "Optics
and photonics" in collaboration with Technical Committee CEN/TC 123 “Lasers and photonics” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2019, and conflicting national standards shall be
withdrawn at the latest by June 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11145:2016.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organization
...

SLOVENSKI STANDARD
oSIST prEN ISO 11145:2017
01-oktober-2017
Optika in fotonska tehnologija - Laserji in z laserji povezana oprema - Slovar in
simboli (ISO/DIS 11145:2017)
Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols
(ISO/DIS 11145:2017)
Optik und Photonik - Laser und Laseranlagen - Begriffe und Formelzeichen (ISO/DIS
11145:2017)
Optique et photonique - Lasers et équipements associés aux lasers - Vocabulaire et
symboles (ISO/DIS 11145:2017)
Ta slovenski standard je istoveten z: prEN ISO 11145
ICS:
01.040.31 Elektronika (Slovarji) Electronics (Vocabularies)
01.080.40 *UDILþQLVLPEROL]DXSRUDERY Graphical symbols for use on
ULVEDKGLDJUDPLKQDþUWLKY electrical and electronics
HOHNWURWHKQLNLLQHOHNWURQLNL engineering drawings,
WHUYXVWUH]QLWHKQLþQL diagrams, charts and in
SURL]YRGQLGRNXPHQWDFLML relevant technical product
documentation
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
oSIST prEN ISO 11145:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 11145:2017

---------------------- Page: 2 ----------------------
oSIST prEN ISO 11145:2017
DRAFT INTERNATIONAL STANDARD
ISO/DIS 11145
ISO/TC 172/SC 9 Secretariat: DIN
Voting begins on: Voting terminates on:
2017-07-06 2017-09-27
Optics and photonics — Lasers and laser-related
equipment — Vocabulary and symbols
Optique et photonique — Lasers et équipements associés aux lasers — Vocabulaire et symboles
ICS: 01.080.40; 31.260; 01.040.31
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 11145:2017(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2017

---------------------- Page: 3 ----------------------
oSIST prEN ISO 11145:2017
ISO/DIS 11145:2017(E) ISO/DIS 11145:2017(E)

Contents Page
Foreword . iv
1 Scope .1
2 Normative references .1
3 Terms and definitions .1
3.1 Beam axis .2
3.2 Beam cross-sectional area .2
3.3 Beam diameter .2
3.4 Beam radius .3
3.5 Beam width .4
3.12 Beam waist diameters .6
3.13 Beam waist radius .6
3.14 Beam waist width .7
3.15 Beam waist separation .7
3.20 Divergence angles .8
4 Symbols and units of measurement .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.