Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation

This document describes the reference method, the Los Angeles test, used for type testing and in case of dispute (and an alternative method, the impact test) for determining the resistance to fragmentation of coarse aggregates (main text) and aggregates for railway ballast (Annex A). For other purposes, in particular factory production control, other methods are possible provided that an appropriate working relationship with the reference method has been established.
This document applies to natural, manufactured or recycled aggregates used in building and civil engineering.
Annex A describes a method for the determination of resistance to fragmentation of aggregates for railway ballast.
Annex B gives alternative narrow range classifications for the Los Angeles test and the impact test.
Annex C contains construction, operation and safety requirements for the impact tester.
Annex D describes a method for checking of the impact tester.
Annex E gives precision data.
Annex F contains a worked example of calculation of impact value SZ.
Annex G gives an alternative narrow range classification for the Los Angeles test of 16/32 mm recycled aggregates.
Annex H proposes an additional sieve for the evaluation of the Los Angeles test for railway ballast.
Annex A is normative and Annexes B to H are informative.

Prüfverfahren für mechanische und physikalische Eigenschaften von Gesteinskörnungen - Teil 2: Verfahren zur Bestimmung des Widerstandes gegen Zertrümmerung

Dieses Dokument legt das Referenzverfahren; das Los-Angeles-Prüfverfahren; das für die Erstprüfung und in Streitfällen zur Bestimmung des Widerstandes gegen Zertrümmerung von groben Gesteinskörnungen (Haupttext) und Gesteinskörnungen für Gleisschotter (Anhang A) verwendet wird (sowie den Schlagversuch als alternatives Verfahren), fest. Für andere Zwecke, speziell im Rahmen der werkseigenen Produktionskontrolle, sind auch andere Verfahren möglich, sofern ein ausreichender Zusammenhang zum Referenzverfahren nachgewiesen wurde.
Dieses Dokument wird angewendet für natürliche, industriell hergestellte oder rezyklierte Gesteins-körnungen, die im Bauwesen eingesetzt werden.
Anhang A beschreibt ein Verfahren zur Bestimmung des Widerstandes gegen Zertrümmerung von Gesteinskörnungen für Gleisschotter.
Anhang B beschreibt alternative enge Kornklassen für das Los-Angeles-Prüfverfahren und den Schlagversuch.
Anhang C umfasst Aufbau, Betrieb und Sicherheitsanforderungen für das Schlagprüfgerät.
Anhang D beschreibt ein Verfahren zur Prüfung des Schlagprüfgeräts.
Anhang E enthält Daten zur Präzision.
Anhang F enthält ein ausgearbeitetes Beispiel zur Berechnung des Schlagzertrümmerungswertes SZ.
Anhang G beschreibt eine alternative enge Kornklasse für das Los-Angeles-Prüfverfahren von rezyklierten Gesteinskörnungen der Kornklasse 16/32 mm.
Anhang H beschreibt ein zusätzliches Sieb zur Bewertung des Los-Angeles-Prüfverfahrens für Gleisschotter.
Anhang A ist normativ, während die Anhänge B bis H informativer Natur sind.

Essais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 2 : Méthodes pour la détermination de la résistance à la fragmentation

Le présent document décrit la méthode de référence, l’essai Los Angeles, utilisée pour les essais de type initiaux et en cas de litige (et une autre méthode, l’essai de fragmentation par impact) pour déterminer la résistance à la fragmentation d’un gravillon (texte principal) et des granulats pour ballast ferroviaire (Annexe A). À d’autres fins, en particulier pour le contrôle de la production en usine, d’autres méthodes sont envisageables, sous réserve qu’une corrélation appropriée avec la méthode de référence ait été établie.
Le présent document s’applique aux granulats naturels, artificiels ou recyclés utilisés dans le Bâtiment et les Travaux Publics.
L’Annexe A décrit une méthode de détermination de la résistance à la fragmentation des granulats utilisés pour le ballast ferroviaire.
L’Annexe B donne d’autres possibilités de classes granulaires pour l’essai Los Angeles et l’essai de fragmentation par impact.
L’Annexe C donne des exigences en matière de construction, de fonctionnement et de sécurité pour la machine de fragmentation par impact.
L’Annexe D décrit un procédé de contrôle de la machine de fragmentation par impact.
L’Annexe E fournit des données sur la fidélité.
L’Annexe F donne un exemple concret de calcul de la valeur de fragmentation par impact SZ.
L’Annexe G donne d’autres possibilités de classes granulaires pour l’essai Los Angeles appliqué aux granulats recyclés  16/32 mm.
L’Annexe H propose un tamis supplémentaire pour l’essai Los Angeles appliqué au ballast ferroviaire.
L’Annexe A est normative et les Annexes B à H sont informatives.

Preskusi mehanskih in fizikalnih lastnosti agregatov - 2. del: Metode določevanja odpornosti proti drobljenju

General Information

Status
Published
Publication Date
14-Apr-2020
Withdrawal Date
30-Oct-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
15-Apr-2020
Due Date
25-Mar-2020
Completion Date
15-Apr-2020

Relations

Buy Standard

Standard
EN 1097-2:2020
English language
43 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 1097-2:2018
English language
43 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1097-2:2020
01-julij-2020
Nadomešča:
SIST EN 1097-2:2010
Preskusi mehanskih in fizikalnih lastnosti agregatov - 2. del: Metode določevanja
odpornosti proti drobljenju
Tests for mechanical and physical properties of aggregates - Part 2: Methods for the
determination of resistance to fragmentation
Prüfverfahren für mechanische und physikalische Eigenschaften von Gesteinskörnungen
- Teil 2: Verfahren zur Bestimmung des Widerstandes gegen Zertrümmerung
Essais pour déterminer les caractéristiques mécaniques et physiques de granulats -
Partie 2 : Méthodes pour la détermination de la résistance à la fragmentation
Ta slovenski standard je istoveten z: EN 1097-2:2020
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
SIST EN 1097-2:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 1097-2:2020

---------------------- Page: 2 ----------------------
SIST EN 1097-2:2020


EN 1097-2
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2020
EUROPÄISCHE NORM
ICS 91.100.15 Supersedes EN 1097-2:2010
English Version

Tests for mechanical and physical properties of aggregates
- Part 2: Methods for the determination of resistance to
fragmentation
Essais pour déterminer les caractéristiques Prüfverfahren für mechanische und physikalische
mécaniques et physiques de granulats - Partie 2 : Eigenschaften von Gesteinskörnungen - Teil 2:
Méthodes pour la détermination de la résistance à la Verfahren zur Bestimmung des Widerstandes gegen
fragmentation Zertrümmerung
This European Standard was approved by CEN on 24 February 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1097-2:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 1097-2:2020
EN 1097-2:2020 (E)
Contents Page
European foreword . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Apparatus . 8
4.2 Additional apparatus required for determination of resistance to
fragmentation by the Los Angeles test method . 8
4.3 Additional apparatus required for determination of resistance to
fragmentation by the impact test method . 10
5 Determination of resistance to fragmentation by the Los Angeles test
method . 10
5.1 Principle . 10
5.2 Preparation of test portion . 10
5.3 Test procedure . 11
5.4 Calculation an
...

SLOVENSKI STANDARD
oSIST prEN 1097-2:2018
01-marec-2018
3UHVNXVLPHKDQVNLKLQIL]LNDOQLKODVWQRVWLDJUHJDWRYGHO0HWRGHGRORþHYDQMD
RGSRUQRVWLSURWLGUREOMHQMX
Tests for mechanical and physical properties of aggregates - Part 2: Methods for the
determination of resistance to fragmentation
Prüfverfahren für mechanische und physikalische Eigenschaften von Gesteinskörnungen
- Teil 2: Verfahren zur Bestimmung des Widerstandes gegen Zertrümmerung
Essais pour déterminer les caractéristiques mécaniques et physiques de granulats -
Partie 2 : Méthodes pour la détermination de la résistance à la fragmentation
Ta slovenski standard je istoveten z: prEN 1097-2
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
oSIST prEN 1097-2:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 1097-2:2018

---------------------- Page: 2 ----------------------
oSIST prEN 1097-2:2018


DRAFT
EUROPEAN STANDARD
prEN 1097-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

January 2018
ICS Will supersede EN 1097-2:2010
English Version

Tests for mechanical and physical properties of aggregates
- Part 2: Methods for the determination of resistance to
fragmentation
Essais pour déterminer les caractéristiques Prüfverfahren für mechanische und physikalische
mécaniques et physiques de granulats - Partie 2 : Eigenschaften von Gesteinskörnungen - Teil 2:
Méthodes pour la détermination de la résistance à la Verfahren zur Bestimmung des Widerstandes gegen
fragmentation Zertrümmerung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 154.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1097-2:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 1097-2:2018
prEN 1097-2:2018 (E)
Contents Page
European foreword . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Apparatus . 8
4.1 General apparatus . 8
4.2 Additional apparatus required for determination of resistance to
fragmentation by the Los Angeles test method . 8
4.3 Additional apparatus required for determination of resistance to
fragmentation by the impact test method . 10
5 Det
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.